Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Quantity per packing unit: 10
-
Bolt/Nut Version: Close-
tolerance bolt - Bolt Head-/Nut Design: Female Star
- Thread Size: M 6
- Thread Pitch [mm]: 1
- Overall Length [mm]: 60
- Screw length below head [mm]: 54
- Outer Diameter [mm]: 10.4
- Spanner Size: 6
- Strength class: 8.8
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: frontal sided
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Dust Cover: with dust lip
-
Fabrication Number: NUP-
VW- 010 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Quantity per packing unit: 10
- Fitting Position: frontal sided
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: frontal sided
- Observe service information:
-
Swirl Type: Right-
hand Twist -
Material: PTFE
(polytetrafluoroethylene) - Dust Cover: with dust lip
-
Fabrication Number: NUP-
VW- 011 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
-
Material: FPM
(fluoride rubber) - Fitting Position: frontal sided
- Weight [kg]: 0.03
- Manufacturer: FEBI BILSTEIN
- Additional information: FE03598
- Lisainfo: FE03598
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: AJM
- Thread Size: M6 x 1
- Length [mm]: 54
- Thread Length [mm]: 26
- Bolt Head-/Nut Design: Female Star
-
Multi-piece: one-
piece - Manufacturer: METZGER
- Fitting Position: frontal sided
- Height [mm]: 10
- Inner Diameter [mm]: 47
- Outer Diameter [mm]: 32
- Manufacturer: BGA
- Lisainfo: OS8325 BGA
- Additional information: OS8325 BGA
Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)
- Engine Code: AJM
- Fitting Position: Front
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Alternating Twist,
Right- hand Twist - Dust Cover: with dust lip
-
Material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Width [mm]: 24.85
- Weight [kg]: 0.014
- Manufacturer: FEBI
- Quantity per packing unit: 10
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity Unit: Pair
- Surface: Galvanically coated
- for bearing clearance from [mm]: 0.02
- to bearing clearance [mm]: 0.068
- for housing diameter from [mm]: 32
- to housing diameter [mm]: 32.025
- Width from [mm]: 24.8
- Width to [mm]: 25
- for wall thickness from [mm]: 1.502
- to wall thickness [mm]: 1.512
- for shaft diameter from [mm]: 28.947
- to shaft diameter [mm]: 28.96
- Packaging height [cm]: 3
- Net Weight [g]: 30
- Packaging length [cm]: 6.5
- Packaging width [cm]: 6.5
- Name: MH029NB21911000
- Manufacturer: MAHLE
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist - Name: DRM 02227
- Manufacturer: DR.MOTOR AUTOMOTIVE
- Engine Code: ATJ
- Fitting Position: frontal sided
- for OE number: MN980030
- Height [mm]: 10
-
Material: PTFE
(polytetrafluoroethylene) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Rotation Direction: Clockwise rotation
- Manufacturer: FAI
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Observe mounting information:
- Manufacturer: ELRING
- Lisainfo: 129.780 ELR
- Additional information: 129.780 ELR
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Fitting Position: frontal sided
-
Engine Code: AJM,
ATJ - Block Separation:
-
Material: PTFE
(polytetrafluoroethylene), ACM (Polyacrylate) - Supplementary Article/Info 2: with mounting sleeve
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist - Manufacturer: REINZ
-
Additional information: 81-
34367- 00 REIN -
Lisainfo: 81-
34367- 00 REIN
- Fitting Position: Axle beam
- General Information: shaft oil seal
- Manufacturer: BORSEHUNG
- Engine Code: AJM
- Fitting Position: frontal sided
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 038103085A
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Manufacturer: CORTECO
- Name: CO 20026413
- Additional information: 20026413
- Lisainfo: 20026413
- Engine Code: AJM
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Rotation Direction: Clockwise rotation
-
Material: ACM
(Polyacrylate), PTFE (polytetrafluoroethylene) - Supplementary Article/Info 2: with mounting sleeve
- Fitting Position: frontal sided
- Weight [kg]: 0.01
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: AJM,
ATJ - Block Separation:
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Swirl Type: Right-
hand Twist - Manufacturer: AJUSA
- Fitting Position: frontal sided
- Required quantity: 1
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Width [mm]: 10
- SVHC: No SVHC present!
- Manufacturer: INA
- for OE number: 03G 105 021 C
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Fitting Position: frontal sided
- Outer Diameter [mm]: 48
- Weight [kg]: 0.031
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AJM
- Quantity: 5
- Length [mm]: 25
- Quantity Unit: Set
- for wall thickness [mm]: 1.513
- for shaft diameter from [mm]: 28.947
- to shaft diameter [mm]: 28.96
- for housing diameter from [mm]: 32
- to housing diameter [mm]: 32.025
- Name: Nukkvollilaager
- Manufacturer: MVE
- Engine Code: AJM
- Quantity per packing unit: 10
- Thickness [mm]: 1.512
- Width [mm]: 25
- for shaft diameter from [mm]: 28.921
- Standard Size [STD]:
- Additionally required articles (article numbers): PD002
- Manufacturer: FAI
-
Engine Code: AJM,
ATJ - Block Separation:
- Component Number: 60250600
- Standard Size [STD]:
- Quantity Unit: Set
- Name: NUKKVOLLILAAGER
- Manufacturer: KS
- Additional information: 77913600
- Lisainfo: 77913600
- Engine Code: AJM
-
Position/Degree: 1-
5 -
Component Number: 73-
3903 - Standard Size [STD]:
- Name: Nukkvollilaager
- Manufacturer: GLY
- Engine Timing: Timing Belt
- Number of Teeth: 44
- Inner Diameter [mm]: 40
- Outer Diameter [mm]: 131.8
- Height [mm]: 34.6
- Material: Steel
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: AJM
-
Vehicle Identification Number (VIN) to: 8D-
X- 200 001 - for OE number: 038109101R
- Material: Steel
-
Additionally required articles (article numbers): BFS101S/
BFS318S, EB5009LCSTD - Name: NUKKVOLL
- Manufacturer: FAI
- Additional information: C248C
- Lisainfo: C248C
- Construction Year to: 06.2001
-
Fitting Position: Exhaust Side,
Intake Side - Manufacturer: BGA
- Engine Code: AJM
- Length [mm]: 424
- Diameter [mm]: 62
- Material: Steel
- Name: NUKKVOLL
- Manufacturer: FRE
- Engine Code: AJM
- Material: Cast Iron
- Manufacturer: FEDERAL MOGUL
- Engine Code: AJM
- for OE number: 038109101R
- Material: Steel
-
Valve type: for inlet valves,
for exhaust valves -
Additionally required articles (article numbers): BFS101S/
BFS318S, EB5009LCSTD - Manufacturer: FAI AUTOPARTS
- Engine Code: AJM
-
Fitting Position: Intake Side,
Exhaust Side - Length [mm]: 425
- Width [mm]: 55
- Material: Steel
- Name: Nukkvoll
- Manufacturer: MVE
- Length [mm]: 425
- Width [mm]: 55
- Weight [kg]: 4.44
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 55
- Weight [kg]: 4.44
- Required quantity: 1
- Length [mm]: 425
- General Information: camshaft
- Manufacturer: BORSEHUNG
-
Engine Code: AJM,
ATJ - Block Separation:
- Material: Steel
- Name: NUKKVOLL
- Manufacturer: KS
- SVHC: No SVHC present!
- Name: NUKKVOLL
- Manufacturer: INA
- Engine Code: AJM
- Material: Steel
- Manufacturer: FEDERAL MOGUL
-
Fitting Position: Exhaust Side,
Intake Side - Manufacturer: BGA
- SVHC: No SVHC present!
- Manufacturer: INA
- Name: LU 428004230
-
Fitting Position: Exhaust Side,
Intake Side - Manufacturer: BGA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks