• Engine Code: AMM
• Construction Year from: 06.2000
• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Overall Length [mm]: 750
• Manufacturer: JP GROUP A/S
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-003
• Manufacturer: NTY

• Number of circuits: 4
• Oxygen Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Engine Code: AJG
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe
• Length [mm]: 355
• Number of pins: 4
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Engine Code: APZ
• Oxygen Sensor: Diagnostic Probe
• Number of circuits: 4
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Oxygen Sensor: Heated
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Length [mm]: 1,500
• Name: Lambda andur
• Manufacturer: MAX

• Construction Year to: 06.2000
• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: AJG, APZ
• Cable Length [mm]: 620
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
A6 AVANT (4B, C5), 1
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A6 AVANT (4B, C5), 1
(kvaliteediklass: PJ)"

• Engine Code: AMM
• Construction Year from: 06.2000
• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: APZ
• Construction Year from: 08.1998
• Construction Year to: 06.2000
• Oxygen Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,700
• Name: Lambda andur
• Manufacturer: MAX

• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Construction Year from: 06.2000
• Engine Code: AMM
• Voltage [V]: 12
• Length [mm]: 620
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV029

• Engine Code: AMM
• Construction Year from: 06.2000, 08.1998
• Oxygen Sensor: Diagnostic Probe, Regulating Probe, Heated
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: Left, Right, before catalytic converter, after catalytic converter

• Oxygen Sensor: Regulating Probe
• Construction Year from: 08.1998
• Construction Year to: 06.2000
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV100

• Construction Year from: 08.1998
• Construction Year to: 06.2000
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 885
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.19
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV599
• Manufacturer: ESEN SKV

• Resistor [Ohm]: 9
• Length [mm]: 721
• Number of circuits: 4
• Conductor Number: 4
• Cable Length [mm]: 721
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: AJG
• Fitting Position: Left Front, Right Front
• Oxygen Sensor: Regulating Probe
• Length [mm]: 575
• Number of connectors: 4
• Manufacturer: VERNET

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 1,750
• Number of circuits: 4
• Manufacturer: ERA

• Fitting Position: Right, Left
• Construction Year from: 06.2000
• Engine Code: AMM
• Oxygen Sensor: Unheated
• Number of pins: 4
• Cable Length [mm]: 1,050
• Quality: OE EQUIVALENT
• for OE number: 058906265B
• Manufacturer: MEAT&DORIA

• Engine Code: AMM
• Construction Year from: 06.2000
• Construction Year to: 10.2000
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 700
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Construction Year from: 08.1998
• Construction Year to: 06.2000
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 630
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.16
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV616
• Manufacturer: ESEN SKV

• Construction Year from: 06.2000
• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 980
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.17
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV641

• Engine Code: APZ
• Construction Year from: 02.1999
• Fitting Position: Left, Right
• Block Separation:
• for OE number: 078 906 265 M
• Conductor Number: 4
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Cable Length [mm]: 670
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Exhaust System: before catalytic converter
• Weight [kg]: 0.121
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Engine Code: AMM, APZ
• Cable Length [mm]: 620
• Manufacturer: DELPHI
• Name: DE ES20160-12B1

• Quantity: 2
• Lambda andur: soojendatud
• Soovituslik vahetusintervall (km): 160 000
• Pistikkontaktide arv: 4
• pikkus üle kõige (mm): 1 700
• Üldine informatsioon: lambda probe; 4 wire
• Manufacturer: VIKA

• Engine Code: AJG
• Required quantity: 2
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AMM
• Construction Year from: 06.2000, 08.1998
• Oxygen Sensor: Diagnostic Probe, Regulating Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, Left, Right, before catalytic converter

• Fitting Position: Bench 1, Bench 2, before catalytic converter
• Engine Code: AJG
• Oxygen Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 570
• Number of pins: 4
• Name: Lambda andur
• Manufacturer: MEY

• Construction Year to: 07.1998
• Engine Code: AJG
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: APZ
• Construction Year from: 02.1999
• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: AMM
• Construction Year from: 06.2000
• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter, Left
• Number of circuits: 4
• Overall Length [mm]: 1,760
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: AMM
• Construction Year from: 06.2000
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: Left, after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 1,800
• Number of pins: 4
• Recommended change interval [km]: 160,000
• Weight [kg]: 0.166
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AJG
• Construction Year to: 07.1998
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 620
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Engine Code: AMM, APZ
• Cable Length [mm]: 1,690
• Name: DE ES20164-12B1
• Manufacturer: DELPHI

• Engine Code: APZ
• Construction Year from: 08.1998
• Construction Year to: 06.2000
• Oxygen Sensor: Heated
• Length [mm]: 670
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Engine Code: AMM
• Construction Year from: 06.2000
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left
• Number of circuits: 4
• Overall Length [mm]: 1,760
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Quantity: 2
• Lambda andur: soojendatud
• Soovituslik vahetusintervall (km): 160 000
• Pistikkontaktide arv: 4
• pikkus üle kõige (mm): 1 700
• Üldine informatsioon: lambda probe; 4 wire
• Manufacturer: VIKA

• Engine Code: APZ
• Construction Year from: 02.1999
• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• for OE number: 078906265M
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 620
• Number of pins: 4
• Weight [g]: 154
• Gross Weight [g]: 187
• Manufacturer: DENSO
• Name: DN DOX-2010
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"

• Fitting Position: Front, before catalytic converter
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Engine Code: AMM/APZ
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,500
• Number of circuits: 4
• Weight [kg]: 0.219
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe
• Length [mm]: 1,700
• Number of pins: 4
• Supplementary Article/Info 2: with mounting manual
• Manufacturer: FAE

• Lambda andur: soojendatud
• Pistikkontaktide arv: 4
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: AMM
• Construction Year from: 06.2000
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 760
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: APZ
• Construction Year from: 08.1998
• Construction Year to: 06.2000
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,700
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 1,700
• Number of pins: 4
• Supplementary Article/Info 2: with mounting manual
• Manufacturer: FAE

• Quantity: 2
• Lambda andur: soojendatud
• Soovituslik vahetusintervall (km): 160 000
• Pistikkontaktide arv: 4
• pikkus üle kõige (mm): 1 700
• Üldine informatsioon: lambda probe; 4 wire
• Manufacturer: VIKA

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV911