• Vehicle Identification Number (VIN) to: 8D-T-309402
• Material: Plastic
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: blue
• Mounting Type: Screw Connection
• Thread Type: Internal Thread
• Manufacturer: TOPRAN
• Lisainfo: 103 643 HP
• Additional information: 103 643 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Manufacturer: DELLO AUTOMEGA

• Material: Plastic
• Colour: blue
• Lisainfo: Cap for expansion tank
• Additional information: Cap for expansion tank

• Quantity per packing unit: 4
• Kõrgus (mm): 24
• Kaal (kg): 0,047
• Surve (bar): 1,2
• Värv: sinine
• Materjal: Plastik
• Siseläbimõõt [mm]: 33
• Välisläbimõõt [mm]: 58
• Kaal (g): 47
• Keermemõõt 1: M3
• Manufacturer: METALCAUCHO

• Material: Plastic
• Colour: blue
• Supplementary Article/Supplementary Info: with gasket/seal
• Mounting Type: Screw Connection
• Thread Type: External Thread
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: ADR
• Vehicle Identification Number (VIN) to: 8DT309 402
• Colour: blue
• Weight [kg]: 0.089
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: blue
• Pressure [bar]: 1.2
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Quantity per packing unit: 4
• Läbimõõt [mm]: 63
• Kõrgus (mm): 38
• Kaal (kg): 0,07
• Lülituspunkt kuni [bar]: 1,6
• Surve (bar): 1,4
• Värv: sinine
• Materjal: Plastik
• Siseläbimõõt [mm]: 35,5
• Välisläbimõõt [mm]: 80
• Kaal (g): 70
• Keermemõõt 1: M3
• Manufacturer: METALCAUCHO

• Engine Code: ADR
• Vehicle Identification Number (VIN) to: 8D-T-309 402
• Pressure [bar]: 1.3
• Material: Plastic
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Kaal (kg): 0,056
• Avamisrõhk (bar): 1,2
• Manufacturer: 3RG

• Vehicle Identification Number (VIN) from: 8DT309402
• Pressure [bar]: 1.5
• Colour: blue
• Manufacturer: JP GROUP
• Lisainfo: Cap for expansion tank
• Additional information: Cap for expansion tank

• Fabrication Number: CCK-VW-008
• Pressure [bar]: 1.2
• Colour: blue
• Manufacturer: NTY

• Engine Code: ADR
• Vehicle Identification Number (VIN) to: ******8D*T*309402
• Material: Plastic
• Opening Pressure [bar]: 1.1
• Weight [kg]: 0.036
• for OE number: 443 121 321
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: APT, ARG, AVV, ADR
• Block Separation:
• Vehicle Identification Number (VIN) from: 8D-T-309 403
• Material: Plastic
• Opening Pressure [bar]: 1.5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 61SKV011

• for OE number: 95510644720
• Manufacturer: KAMOKA

• Construction Year from: 03.1996
• Construction Year to: 01.2001
• Pressure [bar]: 1.5
• Thread Size: M45x3
• Manufacturer: BGA

• Engine Code: ADR
• Vehicle Identification Number (VIN) to: ******8D*T*309402
• Material: Plastic
• Opening Pressure [bar]: 1.1
• Weight [kg]: 0.036
• for OE number: 443 121 321
• Name: SW 99 90 2269
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 1J0121321A
• Pressure [bar]: 1.5
• Colour: blue
• Weight [g]: 71
• Name: IM 43000
• Manufacturer: ORIGINAL IMPERIUM

• Material: Plastic
• Opening Pressure [bar]: 1.5
• Guarantee: 3 years guarantee
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 61SKV012

• for OE number: 1J0 121 321 B
• Opening Pressure [bar]: 1.5
• Colour: blue
• Manufacturer: TRUCKTEC

Manufacturer: NRF KLIMATYZACJA

• for OE number: 1H0121321D
• Weight [g]: 59
• Name: IM 43025
• Manufacturer: ORIGINAL IMPERIUM

• Pressure [bar]: 1.4
• Weight [g]: 67
• Name: IM 43016
• Manufacturer: ORIGINAL IMPERIUM

• Pöördeliik: koos sisevindiga
• Materjal: Plastik
• Avamisrõhk (bar): 1,2
• Manufacturer: METZGER

• for OE number: 025121321B
• Weight [g]: 69
• Name: IM 43001
• Manufacturer: ORIGINAL IMPERIUM

• Construction Year from: 06.1996
• Vehicle Identification Number (VIN) from: 8DT309403
• Pressure [bar]: 1.4
• Manufacturer: VERNET

• Engine Code: APT, AVV, ARG, ADR
• Block Separation:
• Vehicle Identification Number (VIN) from: ******8D*T*309403
• Colour: blue
• Material: Plastic
• Opening Pressure [bar]: 1.5
• Thread Size: M63 x 3,0
• Weight [kg]: 0.16
• for OE number: 1J0 121 321 B
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 8D-T-309 402
• Surve (bar): 1,5
• Materjal: Plastik
• Manufacturer: METZGER

• Construction Year from: 06.1996
• Vehicle Identification Number (VIN) from: 8D_T_309403
• Pressure [bar]: 1.5
• Manufacturer: VERNET

• Surve (bar): 1,4
• Värv: sinine
• Materjal: Plastik
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year to: 05.1996
• Vehicle Identification Number (VIN) to: 8DT309402
• Pressure [bar]: 1.5
• Manufacturer: VERNET

• Vehicle Identification Number (VIN) from: 8D-T-309403
• Vehicle Identification Number (VIN) to: 8D-T-309402
• Colour: blue
• Material: Plastic
• Pressure from [bar]: 1.5
• Weight [kg]: 0.119
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle configuration line / variant: TANK
• Pressure [bar]: 1.5
• Name: DA DRC035
• Manufacturer: DAYCO

• Engine Code: APT, AVV, ARG, ADR
• Block Separation:
• Vehicle Identification Number (VIN) from: ******8D*T*309403
• Colour: blue
• Material: Plastic
• Opening Pressure [bar]: 1.5
• Thread Size: M63 x 3,0
• Weight [kg]: 0.16
• for OE number: 1J0 121 321 B
• Name: SW 30 91 4700
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 09.2001
• Engine Code: APT, ARG, AVV
• Pressure [bar]: 1.5
• Outer Diameter [mm]: 80
• Height [mm]: 27
• Pressure [psi]: 22
• Manufacturer: GATES

• Net Weight [g]: 69
• Packaging length [cm]: 9.1
• Packaging width [cm]: 9.1
• Packaging height [cm]: 9.1
• Name: MH CRB135000S
• Manufacturer: MAHLE

• for OE number: 8D0 121 403 L
• Fabrication Number: CZW-VW-001
• Manufacturer: NTY
• Name: NTY CZW-VW-001

• Construction Year from: 08.1997
• Heating/Cooling: with coolant level switch connection
• Consult accessories list for recommended additional repairs:
• Observe system fill quantity:
• Forward- /Backflow: with backflow
• Number of pins: 2
• Supplementary Article/Info 2: without lid, with sensor
• Connector Shape: oval
• Material: Plastic
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 08.1997
• Material: Plastic
• Heating/Cooling: with coolant level switch connection
• Supplementary Article/Info 2: without lid
• Manufacturer: DELLO AUTOMEGA

• Supplementary Article/Supplementary Info: with coolant level sensor
• Supplementary Article/Info 2: without lid
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 8D0 121 403 D
• Material: Plastic
• Connector Shape: round
• Fabrication Number: CZW-AU-001
• Manufacturer: NTY
• Name: NTY CZW-AU-001

• Construction Year to: 07.1997
• Material: Plastic
• Heating/Cooling: with coolant level switch connection
• Supplementary Article/Info 2: without lid
• Manufacturer: DELLO AUTOMEGA

• Supplementary Article/Info 2: without cover
• Guarantee: 3 years guarantee
• Article number of recommended accessories: 61SKV011
• Weight [kg]: 0.76
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• for OE number: 8D0121403F
• Manufacturer: KAMOKA

• Supplementary Article/Info 2: without cover
• Guarantee: 3 years guarantee
• Article number of recommended accessories: 61SKV011
• Weight [kg]: 0.8
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 61SKV303

• Engine Code: ADR
• Vehicle Identification Number (VIN) to: 8D-V-400 000
• Materjal: Plastik
• Piirangutega toode/piirangu info 2: koos anduriga
• Manufacturer: YSPARTS

• Quality class: PJ
• Name: Expansion tank

• for OE number: 8D0121403D
• Material: Plastic
• Manufacturer: KAMOKA

• Construction Year from: 08.1997
• Material: Plastic
• Supplementary Article/Info 2: without lid
• Lisainfo: Expansion tank for radiator
• Additional information: Expansion tank for radiator

• Supplementary Article/Supplementary Info: with coolant level sensor
• Supplementary Article/Info 2: without lid
• for OE number: 8D0 121 403 D
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year to: 07.1997
• Material: Plastic
• Supplementary Article/Info 2: without lid
• Lisainfo: Expansion tank for radiator
• Additional information: Expansion tank for radiator

• Kaal (kg): 0,6
• vajaminev tükihulk: 1
• Piirangutega toode/piirangu info 2: koos anduriga
• Üldine informatsioon: expansion tank
• Manufacturer: VIKA

• Pressure [bar]: 1.5
• Supplementary Article/Info 2: with cover
• Guarantee: 3 years guarantee
• Article number of recommended accessories: 61SKV011
• Weight [kg]: 0.83
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 61SKV302

• Pressure [bar]: 1.5
• Supplementary Article/Info 2: with cover
• Guarantee: 3 years guarantee
• Article number of recommended accessories: 61SKV011
• Weight [kg]: 0.87
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Construction Year to: 07.1997
• Heating/Cooling: with coolant level switch connection
• Consult accessories list for recommended additional repairs:
• Observe system fill quantity:
• Forward- /Backflow: with backflow
• Number of pins: 2
• Supplementary Article/Info 2: without lid, with sensor
• Connector Shape: round
• Material: PP (Polypropylene)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Kaal (kg): 0,665
• vajaminev tükihulk: 1
• Materjal: Plastik
• Piirangutega toode/piirangu info 2: koos anduriga
• Üldine informatsioon: expansion tank
• Manufacturer: VIKA

• Engine Code: ADR
• Vehicle Identification Number (VIN) to: 8D-T-309 402
• Construction Year to: 07.1997
• Kaal (kg): 0,665
• Materjal: Plastik
• Piirangutega toode/piirangu info 2: koos anduriga
• Pistikukatte kuju: ümar
• Manufacturer: METALCAUCHO

• Supplementary Article/Supplementary Info: with coolant level sensor
• Supplementary Article/Info 2: without lid
• for OE number: 4F0121403C
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Material: Plastic
• Packaging length [cm]: 59
• Packaging width [cm]: 47
• Packaging height [cm]: 22
• for OE number: 8D0121403D
• Weight [kg]: 1.6
• Manufacturer: AKSDASIS

• Capacity [litre]: 1.4
• Material: Plastic
• Supplementary Article/Info 2: with lid
• Supplementary Article/Supplementary Info: without coolant level sensor
• Technical Information: FIRST FIT - Includes caps and sensors when needed
• Name: NI 996244
• Manufacturer: NISSENS

• Length [mm]: 239
• Width [mm]: 288
• Height [mm]: 149
• Colour: white
• Supplementary Article/Info 2: with sensor, with cap
• for OE number: 8D0121403F
• Manufacturer: NRF

• Construction Year from: 01.1998
• Supplementary Article/Info 2: with lid, without sensor
• Material: Plastic
• Weight [kg]: 0.6
• Packaging length [cm]: 34
• Packaging width [cm]: 21
• Packaging height [cm]: 20
• Manufacturer: AKSDASIS

• Construction Year from: 01.1998
• Pistikukatte kuju: ovaalne
• Piirangutega toode/piirangu info 2: ilma kaaneta
• Piirangutega toode/piirangu info: jahutusvedeliku taseme anduriga
• Maht(liiter): 1,5
• soovitava lisavarustuse artiklinumber: 2140037
• Manufacturer: METZGER

• Construction Year from: 08.1998
• Kaal (kg): 0,52
• Kaal (g): 520
• Manufacturer: METALCAUCHO

• Engine Code: APT, AVV, ARG, ADR
• Block Separation:
• Vehicle Identification Number (VIN) from: 8D-W-000 001
• for OE number: 8D0 121 403 L
• Weight [kg]: 0.6
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: APT, AVV, ARG, ADR
• Block Separation:
• Vehicle Identification Number (VIN) from: ******8D*W*000001
• Number of connectors: 2
• Material: Plastic
• Supplementary Article/Supplementary Info: with coolant level sensor
• Supplementary Article/Info 2: without lid
• Weight [kg]: 0.6
• for OE number: 8D0 121 403 L
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 264
• Width [mm]: 154
• Height [mm]: 267
• Colour: white
• Additionally required articles (article numbers): CRB 135 000S
• Supplementary Article/Info 2: with sensor, without cap
• Packaging height [cm]: 15
• Packaging width [cm]: 25
• Packaging length [cm]: 28
• Net Weight [g]: 344
• Name: MH CRT111000S
• Manufacturer: MAHLE

• Vehicle Identification Number (VIN) to: 8DV400000
• Capacity [litre]: 1.7
• Material: Plastic
• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with coolant level sensor

• Construction Year from: 01.1999
• Construction Year to: 01.2001
• for OE number: 8D0121403F
• Weight [g]: 772
• Supplementary Article/Info 2: with sealing plug
• Name: IM 44106
• Manufacturer: ORIGINAL IMPERIUM

• Length [mm]: 290
• Width [mm]: 230
• Height [mm]: 110
• Additionally required articles (article numbers): CRB 135 000S
• Supplementary Article/Info 2: without cap
• Packaging height [cm]: 19
• Packaging width [cm]: 22.5
• Packaging length [cm]: 27.5
• Net Weight [g]: 680
• Manufacturer: MAHLE BEHR HELLA TERMIKA

• Engine Code: ADR
• Vehicle Identification Number (VIN) to: ******8D*V*400000
• Number of connectors: 2
• Material: Plastic
• Connector Shape: round
• Supplementary Article/Supplementary Info: with coolant level sensor
• Supplementary Article/Info 2: without lid
• Weight [kg]: 0.665
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: APT, AVV, ARG, ADR
• Block Separation:
• Vehicle Identification Number (VIN) from: ******8D*W*000001
• Number of connectors: 2
• Material: Plastic
• Supplementary Article/Supplementary Info: with coolant level sensor
• Supplementary Article/Info 2: without lid
• Weight [kg]: 0.6
• for OE number: 8D0 121 403 L
• Name: SW 30 92 1842
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 8D0121403D
• Weight [g]: 765
• Supplementary Article/Info 2: with sealing plug
• Name: IM 44104
• Manufacturer: ORIGINAL IMPERIUM