• Construction Year to: 06.1997
• Vehicle Identification Number (VIN) to: 8D-V-152 676
• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Height 1 [mm]: 14.75
• Height 2 [mm]: 17
• Lisainfo: Wheel bearing kit, rear, for one wheel
• Additional information: Wheel bearing kit, rear, for one wheel

• Vehicle Identification Number (VIN) from: 8D-V-152 677
• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Height 1 [mm]: 14.75
• Height 2 [mm]: 17
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing kit, rear, for one wheel
• Additional information: Wheel bearing kit, rear, for one wheel

• Construction Year from: 01.1998
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Height [mm]: 37
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Vehicle Identification Number (VIN) to: 8D-V-152676
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 52
• Height [mm]: 7
• Material: NBR (nitrile butadiene rubber)
• Dust Cover: with dust lip
• Fitting Position: Rear Axle both sides
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 8D-V-152676
• Fitting Position: Front Axle both sides, inner
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing, front, inner
• Additional information: Wheel bearing, front, inner

• Height [mm]: 14.7
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50.3
• Fitting Position: Front Axle
• Weight [kg]: 0.11
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: without wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-AU-001
• Manufacturer: NTY
• Name: NTY KLT-AU-001

• Vehicle Identification Number (VIN) to: 8D-V-152 676
• Installatsiooni pool: Tagasild mõlemapoolselt
• Laius 1 (mm): 15,5
• Laius 2 (mm): 14
• Välisläbimõõt 1 [mm]: 45
• Välisläbimõõt 2 [mm]: 50
• Siseläbimõõt 1 [mm]: 19
• Siseläbimõõt 2 (mm): 29
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Construction Year to: 02.1997
• Vehicle Identification Number (VIN) to: 8D-V-152676
• Laius 1 (mm): 14,2
• Laius 2 (mm): 15,5
• Välisläbimõõt 1 [mm]: 50,3
• Välisläbimõõt 2 [mm]: 45,2
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle Left, Rear Axle Right
• Width 1 [mm]: 16.637
• Width 2 [mm]: 14.732
• Outer Diameter 1 [mm]: 45.237
• Outer Diameter 2 [mm]: 50.292
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Manufacturer: GSP

• Fitting Position: Rear Axle Left, Rear Axle Right
• for OE number: 8D0598625
• Width 1 [mm]: 16.637
• Width 2 [mm]: 14.732
• Outer Diameter 1 [mm]: 45.237
• Outer Diameter 2 [mm]: 50.292
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Construction Year to: 02.1997
• Vehicle Identification Number (VIN) to: 8D-V-152676
• Piirangutega toode/piirangu info 2: koos võllitihendiga
• Laius 1 (mm): 14,2
• Laius 2 (mm): 15,5
• Välisläbimõõt 1 [mm]: 50,3
• Välisläbimõõt 2 [mm]: 45,2
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: FRRE LR+RE
• for OE number: 311405625N
• Inner Diameter [mm]: 29
• Inner Diameter 2 [mm]: 17
• Width 1 [mm]: 14
• Width 2 [mm]: 39
• Number of mounting bores: 1
• Name: DA KWD1019
• Manufacturer: DAYCO

• Vehicle Identification Number (VIN) from: 8DV152677
• Supplementary Article/Info 2: without wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-AU-004
• Manufacturer: NTY
• Name: NTY KLT-AU-004

• Fitting Position: Rear Axle
• Construction Year from: 02.1997
• Vehicle Identification Number (VIN) from: 8D-V-152677
• Laius 1 (mm): 14,2
• Laius 2 (mm): 15,5
• Välisläbimõõt 1 [mm]: 50,3
• Välisläbimõõt 2 [mm]: 45,2
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Manufacturer: DENCKERMANN ZAWIESZENIE

Lisainfo: sama kui 1151300510 (vana kood) Installatsiooni pool: Tagasild mõlemapoolselt Välisläbimõõt 1 [mm]: 50 Välisläbimõõt 2 [mm]: 45 Siseläbimõõt 1 [mm]: 29 Siseläbimõõt 2 (mm): 19 Kõrgus 1 (mm): 14,75 Kõrgus 2 (mm): 17

• Construction Year to: 12.1997
• Vehicle Identification Number (VIN) to: 8D-V-152676
• Fitting Position: Rear Axle
• Width 1 [mm]: 15
• Width 2 [mm]: 16
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Construction Year from: 01.1997
• Vehicle Identification Number (VIN) from: 8D-V-152677
• Fitting Position: Rear Axle
• Width 1 [mm]: 16
• Width 2 [mm]: 14
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Vehicle Identification Number (VIN) to: ******8D*V*152676
• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.234
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Construction Year to: 02.1997
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 15
• Outer Diameter 2 [mm]: 45
• Weight [kg]: 0.34
• Manufacturer: A.B.S.

• Siseläbimõõt 1 [mm]: 19
• Välisläbimõõt 1 [mm]: 45
• Laius 1 (mm): 15
• Siseläbimõõt 2 (mm): 29
• Välisläbimõõt 2 [mm]: 50
• Laius 2 (mm): 16
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Construction Year to: 12.1997
• Vehicle Identification Number (VIN) to: 8D-V-152676
• Width [mm]: 14.7
• Inner Diameter [mm]: 19.1
• Outer Diameter [mm]: 45.2
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Manufacturer: OPTIMAL

• Fitting Position: Rear Axle
• Construction Year from: 02.1997
• Vehicle Identification Number (VIN) from: 8D-V-152677
• Laius 1 (mm): 14,2
• Laius 2 (mm): 15,5
• Välisläbimõõt 1 [mm]: 50,3
• Välisläbimõõt 2 [mm]: 45,2
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Quality class: PJ
• Name: Wheel bearing kit

• Vehicle Identification Number (VIN) from: ******8D*V*152677
• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.281
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Alternative Repair Kit: 100 598 0101, 100 598 0101/SK
• Fitting Position: Rear Axle, inner
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50
• Height [mm]: 14.73
• Bearing Type: Tapered Roller Bearing
• Manufacturer: MEYLE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: Ch. >8D_V_152676
• for OE number: 443505509
• Inner Diameter [mm]: 29
• Inner Diameter 2 [mm]: 19
• Width 1 [mm]: 14
• Width 2 [mm]: 45
• Number of mounting bores: 1
• Manufacturer: DAYCO ZESTAWY LOZYSK KOL

• Vehicle Identification Number (VIN) from: 8D-V-152677
• Construction Year from: 02.1997
• Fitting Position: Rear Axle
• Width [mm]: 16.64
• Inner Diameter [mm]: 19.05
• Outer Diameter 1 [mm]: 50.29
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Vehicle Identification Number (VIN) from: 8D_V_152677
• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: Ch.8D_V_152677 >
• for OE number: 8D0598625B
• Inner Diameter [mm]: 29
• Inner Diameter 2 [mm]: 19
• Width 1 [mm]: 14
• Width 2 [mm]: 45
• Number of mounting bores: 1
• Manufacturer: DAYCO ZESTAWY LOZYSK KOL

• Fitting Position: Rear Axle
• Construction Year from: 01.1997
• Vehicle Identification Number (VIN) from: 8D-V-152677
• Width [mm]: 14.7
• Inner Diameter [mm]: 19.1
• Outer Diameter [mm]: 45.2
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Manufacturer: OPTIMAL

• Fitting Position: Rear Axle
• Construction Year to: 02.1997
• Vehicle Identification Number (VIN) to: 8D-V-152676
• Width [mm]: 15.49
• Inner Diameter [mm]: 19.05
• Outer Diameter 1 [mm]: 50.29
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 45
• Height [mm]: 17
• Bearing Type: Tapered Roller Bearing
• Manufacturer: MEYLE

Alternative Repair Kit: 100 598 0002, 100 498 0023, 014 033 0048, 714 502 0006, 614 750 0009

• Vehicle Identification Number (VIN) from: ******8D*V*152677
• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Weight [kg]: 0.281
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: SW 30 92 6568
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: 8D-V-152676
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter 1 [mm]: 19.1
• Outer Diameter 1 [mm]: 45.2
• Width 1 [mm]: 16.6
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50.3
• Width 2 [mm]: 14.7
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713610240
• Lisainfo: 713 6102 40 FAG
• Additional information: 713 6102 40 FAG

• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 75
• Inner Diameter [mm]: 39
• Width [mm]: 37
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing, front
• Additional information: Wheel bearing, front

• Vehicle Identification Number (VIN) to: ******8D*V*152676
• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Weight [kg]: 0.234
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: SW 30 85 0008
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: without wheel hub
• Fitting Position: Rear Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-AU-002
• Manufacturer: NTY
• Name: NTY KLP-AU-002

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 8D-V-152677
• Vehicle Identification Number (VIN) to: 8D-1-200000
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter 1 [mm]: 29
• Outer Diameter 1 [mm]: 50.3
• Width 1 [mm]: 14.7
• Inner Diameter 2 [mm]: 19.1
• Outer Diameter 2 [mm]: 45.3
• Width 2 [mm]: 14.7
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713610370

• Fitting Position: Front Axle both sides
• Quantity per axle: 2
• Inner Diameter 1 [mm]: 41
• Inner Diameter 2 [mm]: 39
• Width [mm]: 37
• Outer Diameter [mm]: 75
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN): [8D-T-152677;]
• Fitting Position: Right, Left, Rear Axle
• Outer Diameter 1 [mm]: 50
• Width 1 [mm]: 14
• Manufacturer: SNR
• Name: SN R154.50

• Fitting Position: Front Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Installatsiooni pool: taga
• Üldine informatsioon: wheel bearing with assembly parts; rear
• Manufacturer: VIKA

• Fabrication Number: KLP-AU-004
• Rim Size [inch]: 16.0
• Manufacturer: NTY
• Name: NTY KLP-AU-004

Fitting Position: Rear Axle, Front Axle Left, Front Axle Right, Front Axle Transmission Type: 5-Speed Manual Transmission, 5-Speed Automatic Transmission, Manual Transmission

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter 1 [mm]: 75
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 39
• Inner Diameter 2 [mm]: 41
• Weight [kg]: 0.7
• Outer Diameter 1 [mm]: 75
• Width 1 [mm]: 37
• Manufacturer: A.B.S.

• Installatsiooni pool: esisild mõlemapoolselt
• Laius (mm): 37
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Manufacturer: JPN

• Fitting Position: Front Axle Left, Front Axle Right
• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 75
• Inner Diameter 1 [mm]: 39
• Inner Diameter 2 [mm]: 41
• Manufacturer: GSP

• Construction Year from: 02.1997
• Vehicle Identification Number (VIN) from: 8D-V-152677
• Fitting Position: Rear Axle
• Required quantity: 2
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Outer Diameter 2 [mm]: 45.2
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Manufacturer: SKF NAPINACZE POMPY

• Fitting Position: Front Axle
• Width [mm]: 37
• Outer Diameter [mm]: 75
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle configuration line / variant: FRRE LR+FR
• for OE number: 4B0498625
• Inner Diameter [mm]: 39
• Width 1 [mm]: 37
• Number of mounting bores: 1
• Name: DA KWD1058
• Manufacturer: DAYCO

• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.91
• Supplementary Article/Supplementary Info: with nuts, with drive shaft bolt
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Outer Diameter [mm]: 75
• Inner Diameter 1 [mm]: 41
• Inner Diameter 2 [mm]: 39
• Width [mm]: 37
• Supplementary Article/Info 2: with nut, with screw
• Full Set:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Esisild
• Laius (mm): 37
• Kaal (kg): 0,68
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Manufacturer: METALCAUCHO

• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.91
• Supplementary Article/Supplementary Info: with nuts, with drive shaft bolt
• Name: SW 32 92 4366
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Inner Diameter 2 [mm]: 41
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle both sides
• Weight [kg]: 0.627
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Packaging length [cm]: 7.5
• Packaging width [cm]: 7.5
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1.86
• Bolt Hole Circle Ø 1 [mm]: 112
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle
• Required quantity: 2
• Weight [kg]: 0.966
• Packaging length [cm]: 11
• Packaging width [cm]: 9
• Packaging height [cm]: 6
• Outer Diameter [mm]: 75
• Inner Diameter [mm]: 39
• Width [mm]: 37
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle configuration line / variant: FRRE LR+FR
• Inner Diameter [mm]: 43
• Width 1 [mm]: 37
• Number of mounting bores: 1
• Manufacturer: DAYCO ZESTAWY LOZYSK KOL

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 8D-1-200000
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 39
• Inner Diameter 2 [mm]: 16
• Outer Diameter [mm]: 75
• Width [mm]: 37
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713610080

• Fitting Position: Front Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1.76
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV436

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Manufacturer: SKF
• Name: SK VKBA1355

• Width 1 [mm]: 37
• Inner Diameter 1 [mm]: 39
• Outer Diameter 1 [mm]: 75
• Tightening Torque [Nm]: 180
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: SNR
• Name: SN R157.23

• Vehicle Identification Number (VIN) from: 8DV152677
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-AU-006
• Rim Size [inch]: 17.0, 18.0
• Manufacturer: NTY
• Name: NTY KLT-AU-006

• Fitting Position: Right, Front Axle
• Manufacturer: SNR /NTN-SNR/
• Name: SN R157.24