• Vehicle Identification Number (VIN) from: 8D-T-309403
• Quantity per packing unit: 10
• Inner Diameter [mm]: 28.5
• Sealing Ring Diameter [mm]: 28.5
• Thickness [mm]: 3.8
• Shape: O-Ring
• Name: RONGASTIHEND
• Manufacturer: HAN

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Name: Radiator
• Quality class: ZJ

Lisainfo: A4 94-00 (kvaliteediklass ZJ)

• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 32
• Core Length [mm]: 635
• Core Width [mm]: 396
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Lisainfo: SKODA SUPERB I (3U) (02-) 2.0 i
• Additional information: SKODA SUPERB I (3U) (02-) 2.0 i

Installation Information: MultiFit - Nissens has combined multiple product designs into one part

for OE number: 431370550

• Vehicle Identification Number (VIN) from: 8D-T-309403
• Quantity per packing unit: 10
• Thickness [mm]: 3.8
• Outer Diameter [mm]: 28.5
• Material: Rubber
• Weight [kg]: 0.006
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 08.2001
• Pressure [bar]: 1.2
• Manufacturer: ASHIKA

• Construction Year from: 03.1996
• Pressure [bar]: 1.5
• Manufacturer: ASHIKA

• Construction Year from: 03.1996
• Pressure [bar]: 1.5
• Manufacturer: JAPKO

• Pressure [bar]: 1.5
• Manufacturer: ASHIKA

• Engine Code: AVG, AFN
• Block Separation:
• Vehicle Identification Number (VIN) from: 8D-T-309 403
• Colour: blue
• Material: Plastic
• Pressure from [bar]: 1.5
• Weight [kg]: 0.119
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Transmission Type: 5-Speed Manual Transmission
• Supplementary Article/Info 2: without sensor, with seal ring
• Material: Aluminium
• Core Length [mm]: 632
• Core Width [mm]: 415
• Core Depth [mm]: 34
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 632*395*32
• Additional information: 632*395*32

• Transmission Type: 5-Speed Manual Transmission
• Supplementary Article/Info 2: without sensor
• Material: Aluminium
• Core Length [mm]: 415
• Core Width [mm]: 632
• Core Depth [mm]: 34
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: MAX

• Name: Radiator
• Quality class: PJ

Lisainfo: A6 97-01 (kvaliteediklass PJ)

• Name: Radiator
• Quality class: P

Lisainfo: A4 94-00 (kvaliteediklass P)

• Core Length [mm]: 630
• Core Width [mm]: 397
• Core Depth [mm]: 32
• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles with/without air conditioning
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 79
• Packaging width [cm]: 47
• Packaging height [cm]: 14
• Weight [kg]: 3.38
• Manufacturer: AKSDASIS

• Name: Radiator
• Quality class: PJ

Lisainfo: "Tootja: RNBC
A6 97-01
(kvaliteediklass: PJ)"

• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 635
• Core Width [mm]: 398
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Water Tank Material (radiator): Plastic

Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers

• Netopikkus [mm]: 635
• Netolaius [mm]: 398
• Netosügavus [mm]: 34
• Varustusaste: FIRST FIT
• Jahutusribi materjal: Alumiinium
• Materjal veekamber (radiaator): Plastik
• Radiaatori tüüp: Jahutusribid mehaaniliselt ühendatud
• Lisainfo: AUDI A 4 / S 4 (B5) (94-) 1.6 i
• Additional information: AUDI A 4 / S 4 (B5) (94-) 1.6 i

Montaažiinfo: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Depth [mm]: 23
• Core Length [mm]: 632
• Core Width [mm]: 398
• Manufacturer: KAMOKA

• Radiator type: Mechanically jointed cooling fins
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Length [mm]: 632
• Core Width [mm]: 396
• Core Depth [mm]: 32
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Transmission Type: Manual Transmission
• Core Depth [mm]: 32
• Core Width [mm]: 398
• Core Length [mm]: 630
• Manufacturer: DELLO AUTOMEGA

• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Vehicle Equipment: for vehicles without air conditioning
• Core Length [mm]: 632
• Core Width [mm]: 398
• Core Depth [mm]: 34
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Name: Radiator
• Quality class: ZJ

Lisainfo: A6 97-01 (kvaliteediklass PJ)

• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: Manual Transmission
• Core Length [mm]: 629
• Core Width [mm]: 399
• Core Depth [mm]: 22
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Lisainfo: Radiator, engine cooling
• Additional information: Radiator, engine cooling

• Radiator type: Brazed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Depth [mm]: 34
• Core Length [mm]: 632
• Core Width [mm]: 415
• Manufacturer: KAMOKA

• Construction Year to: 12.1998
• Transmission Type: Automatic Transmission
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Length [mm]: 632
• Core Width [mm]: 398
• Core Depth [mm]: 34
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Transmission Type: Manual Transmission
• Radiator type: Mechanically jointed cooling fins
• Core Depth [mm]: 34
• Core Length [mm]: 632
• Core Width [mm]: 415
• Inlet Ø [mm]: 33
• Outlet Ø [mm]: 33
• Manufacturer: TYC OŒWIETLENIE

• Core Depth [mm]: 0
• Core Length [mm]: 0
• Core Width [mm]: 0
• Material: Aluminium, Plastic
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• General Information: radiator; pipe enlarging
• Manufacturer: VIKA

• Netopikkus [mm]: 632
• Netolaius [mm]: 398
• Netosügavus [mm]: 34
• Jahutusribi materjal: Alumiinium
• Materjal veekamber (radiaator): Plastik
• Radiaatori tüüp: Jahutusribid mehaaniliselt ühendatud
• Lisainfo: AUDI A 4 / S 4 (B5) (94-) 1.6 i
• Additional information: AUDI A 4 / S 4 (B5) (94-) 1.6 i

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Core Depth [mm]: 34
• Core Length [mm]: 635
• Core Width [mm]: 398
• Manufacturer: KAMOKA

• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 632
• Core Width [mm]: 415
• Radiator type: Mechanically jointed cooling fins
• Water Tank Material (radiator): Plastic

Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers

• Transmission Type: 4-Speed Automatic Transmission
• Material: Aluminium
• Heating/Cooling: for vehicles with combined radiator/ oil cooler
• Core Length [mm]: 415
• Core Width [mm]: 632
• Core Depth [mm]: 34
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: MAX

• Transmission Type: 5-Speed Manual Transmission
• Heating/Cooling: for vehicles with high performance radiator
• Material: Aluminium
• Core Length [mm]: 632
• Core Width [mm]: 395
• Core Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Radiator type: Brazed cooling fins
• Manufacturer: NRF
• Lisainfo: 632*395*24
• Additional information: 632*395*24

Vehicle Equipment: for vehicles with air conditioning, for vehicles with trailer hitch

• Transmission Type: 5-Speed Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 635
• Core Width [mm]: 398
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without cap, without expansion tank
• Supplementary Article/Supplementary Info: with gaskets/seals
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Lisainfo: AUDI A 4 / S 4 (B5) (94-) 1.8 i
• Additional information: AUDI A 4 / S 4 (B5) (94-) 1.8 i

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Core Length [mm]: 630
• Core Width [mm]: 396
• Core Depth [mm]: 34
• Manufacturer: JPN

• Version: 1
• Transmission Type: Automatic Transmission
• Core Length [mm]: 632
• Core Width [mm]: 399
• Core Depth [mm]: 32
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Lisainfo: Radiator, 631x399 mm, PL/ALU
• Additional information: Radiator, 631x399 mm, PL/ALU

• Name: Radiator
• Quality class: P

Lisainfo: A6 97-01 (kvaliteediklass PJ)

• Vehicle Equipment: for vehicles without air conditioning
• Transmission Type: Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 23
• Core Length [mm]: 632
• Core Width [mm]: 415
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: without gasket/seal
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Name: NI 60308A
• Lisainfo: SKODA SUPERB I (3U) (02-) 1.9 TDi
• Additional information: SKODA SUPERB I (3U) (02-) 1.9 TDi

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Transmission Type: 4-Speed Automatic Transmission
• Material: Aluminium
• Heating/Cooling: for vehicles with combined radiator/ oil cooler
• Core Length [mm]: 632
• Core Width [mm]: 415
• Core Depth [mm]: 34
• Version: Alternative
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 632*415*34
• Additional information: 632*415*34

• Vehicle Equipment: for vehicles with air conditioning
• Transmission Type: Manual Transmission
• Core Length [mm]: 632
• Core Width [mm]: 398
• Core Depth [mm]: 32
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• Lisainfo: Radiator, 631x399 mm, PL/ALU
• Additional information: Radiator, 631x399 mm, PL/ALU

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• for OE number: 4B0121251T
• Core Depth [mm]: 32
• Core Length [mm]: 632
• Core Width [mm]: 399
• Manufacturer: KAMOKA

• Quality class: P

Lisainfo: A6 97-01 (kvaliteediklass P)

• Transmission Type: 5-Speed Manual Transmission
• Heating/Cooling: for vehicles with high performance radiator
• Supplementary Article/Info 2: without sensor, with seal ring
• Material: Aluminium
• Core Length [mm]: 632
• Core Width [mm]: 395
• Core Depth [mm]: 33
• Radiator type: Brazed cooling fins
• Name: RADIAATOR,MOOTORIJAHUTUS
• Manufacturer: NRF
• Lisainfo: 632*395*34
• Additional information: 632*395*34

Vehicle Equipment: for vehicles with air conditioning, for vehicles with trailer hitch

• Transmission Type: 5-Speed Manual Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 632
• Core Width [mm]: 415
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Water Tank Material (radiator): Plastic

• Radiator type: Mechanically jointed cooling fins
• Cooling fins material: Aluminium
• Water Tank Material (radiator): Plastic
• for OE number: 8D0.121.251 C
• Core Depth [mm]: 32
• Core Length [mm]: 632
• Core Width [mm]: 399
• Manufacturer: KAMOKA

• Core Length [mm]: 630
• Core Width [mm]: 397
• Core Depth [mm]: 32
• Transmission Type: Automatic Transmission
• Vehicle Equipment: for vehicles with/without air conditioning
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Packaging length [cm]: 79
• Packaging width [cm]: 47
• Packaging height [cm]: 14
• Weight [kg]: 3.84
• Manufacturer: AKSDASIS

• Version: 3
• Transmission Type: Automatic Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 632
• Core Width [mm]: 396
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: with oil cooler, without gasket/seal
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Name: NI 60229
• Lisainfo: AUDI A 4 / S 4 (B5) (94-) 1.6 i
• Additional information: AUDI A 4 / S 4 (B5) (94-) 1.6 i

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Transmission Type: 5-Speed Manual Transmission
• Heating/Cooling: for vehicles with high performance radiator
• Material: Aluminium
• Core Length [mm]: 630
• Core Width [mm]: 383
• Core Depth [mm]: 33
• Radiator type: Brazed cooling fins
• Manufacturer: NRF
• Lisainfo: 630*383*33
• Additional information: 630*383*33

Vehicle Equipment: for vehicles with air conditioning, for vehicles with trailer hitch

• Width [mm]: 38
• Transmission Type: Manual Transmission
• Length [mm]: 632
• Depth [mm]: 22
• Weight [kg]: 6.5
• Vehicle Equipment: for vehicles with/without air conditioning
• Core Depth [mm]: 0
• Core Length [mm]: 0
• Core Width [mm]: 0
• General Information: radiator; pipe enlarging
• Manufacturer: VIKA

• Version: 2
• Transmission Type: Automatic Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 635
• Core Width [mm]: 398
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without cap, without expansion tank
• Supplementary Article/Supplementary Info: with oil cooler, with gaskets/seals
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Lisainfo: AUDI A 4 / S 4 (B5) (94-) 1.6 i
• Additional information: AUDI A 4 / S 4 (B5) (94-) 1.6 i

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Transmission Type: 4-Speed Automatic Transmission
• Material: Aluminium
• Heating/Cooling: for vehicles with combined radiator/ oil cooler
• Core Length [mm]: 632
• Core Width [mm]: 415
• Core Depth [mm]: 34
• Radiator type: Mechanically jointed cooling fins
• Name: RADIAATOR, KŽIVITUSAKU
• Manufacturer: NRF
• Lisainfo: 632*399*32
• Additional information: 632*399*32

• Core Depth [mm]: 32
• Core Length [mm]: 630
• Core Width [mm]: 382
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Technical Information: quick connection outlet
• Name: Radiator
• Quality class: PJ

Lisainfo: "Tootja: SRL
A4 94-00
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A4 94-00
(kvaliteediklass: PJ)"

• Version: 3
• Transmission Type: Automatic Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 632
• Core Width [mm]: 396
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Supplementary Info: with oil cooler
• Water Tank Material (radiator): Plastic

Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers

• Version: 1
• Transmission Type: Automatic Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 635
• Core Width [mm]: 398
• Inlet Ø [mm]: 32.5
• Outlet Ø [mm]: 32.5
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without cap, without expansion tank
• Supplementary Article/Supplementary Info: with oil cooler, with gaskets/seals
• Water Tank Material (radiator): Plastic
• Manufacturer: NISSENS
• Lisainfo: AUDI A 4 / S 4 (B5) (94-) 1.6 i
• Additional information: AUDI A 4 / S 4 (B5) (94-) 1.6 i

Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box

• Transmission Type: 4-Speed Automatic Transmission
• Material: Aluminium
• Heating/Cooling: for vehicles with combined radiator/ oil cooler
• Core Length [mm]: 632
• Core Width [mm]: 395
• Core Depth [mm]: 34
• Supplementary Article/Info 2: with seal ring
• Radiator type: Brazed cooling fins
• Manufacturer: NRF
• Lisainfo: 632*428,8*30
• Additional information: 632*428,8*30

• Transmission Type: Manual Transmission
• Vehicle Equipment: for vehicles with/without air conditioning
• Construction Year from: 09.1997
• Construction Year to: 09.2000
• Core Depth [mm]: 32
• Core Length [mm]: 632
• Core Width [mm]: 385
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Technical Information: quick connection inlet/outlet
• Name: Radiator
• Quality class: PJ

Lisainfo: "Tootja: SRL
A6 97-01
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A6 97-01
(kvaliteediklass: PJ)"

• Radiator type: Mechanically jointed cooling fins
• Heating/Cooling: for vehicles with high performance radiator
• Core Length [mm]: 632
• Core Width [mm]: 385
• Core Depth [mm]: 32
• Water Tank Material (radiator): Plastic
• Supplementary Article/Info 2: with quick couplers, with screw
• Vehicle Equipment: for vehicles with/without air conditioning
• Transmission Type: Manual Transmission
• Packaging height [cm]: 17
• Net Weight [g]: 3,686
• Packaging width [cm]: 55
• Packaging length [cm]: 84
• Name: Radiaator,mootorijahutus
• Manufacturer: BEH MAH

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Version: 2
• Transmission Type: Automatic Transmission
• Cooling fins material: Aluminium
• Core Depth [mm]: 34
• Core Length [mm]: 632
• Core Width [mm]: 400
• Inlet Ø [mm]: 32
• Outlet Ø [mm]: 32
• Radiator type: Mechanically jointed cooling fins
• Supplementary Article/Info 2: without expansion tank
• Supplementary Article/Supplementary Info: with oil cooler
• Water Tank Material (radiator): Plastic

Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers

• Transmission Type: Manual Transmission
• Core Length [mm]: 632
• Core Width [mm]: 415
• Core Depth [mm]: 34
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Type: Automatic Transmission
• Vehicle Equipment: for vehicles with/without air conditioning
• Construction Year from: 02.1996
• Construction Year to: 09.2000
• Core Depth [mm]: 32
• Core Length [mm]: 632
• Core Width [mm]: 398
• Radiator type: Brazed cooling fins
• Water Tank Material (radiator): Plastic
• Supplementary Article/Info 2: with quick couplers
• Technical Information: quick connection inlet/outlet
• Name: Radiator
• Quality class: PJ

Lisainfo: PASSAT 00- (kvaliteediklass PJ) Additional information: PASSAT 00- (kvaliteediklass PJ)

• Radiator type: Brazed cooling fins
• Core Length [mm]: 630
• Core Width [mm]: 412
• Core Depth [mm]: 34
• Water Tank Material (radiator): Plastic
• Cooling fins material: Aluminium
• Supplementary Article/Info 2: with quick couplers
• Packaging height [cm]: 17
• Net Weight [g]: 4,319
• Packaging width [cm]: 54.5
• Packaging length [cm]: 83.5
• Name: Radiaator,mootorijahutus
• Manufacturer: BEH MAH

General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.

• Engine Code: AFN
• Construction Year to: 09.2000
• Transmission Type: Automatic Transmission
• for OE number: 8D0121251M
• Material: Aluminium
• Weight [g]: 4,120
• Frame Material: Plastic
• Core Length [mm]: 631
• Core Width [mm]: 399
• Core Depth [mm]: 33
• Gross Weight [g]: 5,800
• alternative item: -
• Manufacturer: DENSO