Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Vehicle Identification Number (VIN) from: 8DT160956
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Height [mm]: 37
- Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing kit,
for one front wheel -
Additional information: Wheel bearing kit,
for one front wheel
-
Vehicle Identification Number (VIN) to: 8D-
V- 152676 - Inner Diameter [mm]: 40
- Outer Diameter [mm]: 52
- Height [mm]: 7
-
Material: NBR
(nitrile butadiene rubber) - Dust Cover: with dust lip
- Fitting Position: Rear Axle both sides
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Vehicle Identification Number (VIN) to: 8D-
V- 152676 -
Fitting Position: Front Axle both sides,
inner - Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing,
front, inner -
Additional information: Wheel bearing,
front, inner
- Height [mm]: 14.7
- Inner Diameter [mm]: 29
- Outer Diameter [mm]: 50.3
- Fitting Position: Front Axle
- Weight [kg]: 0.11
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Alternative Repair Kit: 100 598 0101,
100 598 0101/ SK -
Fitting Position: Rear Axle,
inner - Inner Diameter [mm]: 29
- Outer Diameter [mm]: 50
- Height [mm]: 14.73
- Bearing Type: Tapered Roller Bearing
- Manufacturer: MEYLE
- Supplementary Article/Info 2: without wheel hub
-
Fitting Position: Rear Axle,
Front Axle Left, Front Axle Right -
Fabrication Number: KLP-
AU- 002 - Manufacturer: NTY
-
Name: NTY KLP-
AU- 002
- Fitting Position: Rear Axle
- Laius (mm): 37
- Siseläbimõõt [mm]: 39
- Välisläbimõõt [mm]: 75
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Vehicle Identification Number (VIN) from: 8DT160956
-
Fabrication Number: KLP-
AU- 004 - Rim Size [inch]: 16.0
- Manufacturer: NTY
-
Name: NTY KLP-
AU- 004
Fitting Position: Rear Axle, Front Axle Left, Front Axle Right, Front Axle Transmission Type: 5-Speed Manual Transmission, 5-Speed Automatic Transmission, Manual Transmission
- Fitting Position: Rear Axle
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter 1 [mm]: 75
- Manufacturer: METELLI LOZYSKA KOLA PIASTY
-
Fitting Position: Front Axle Left,
Front Axle Right -
Vehicle Identification Number (VIN) from: 8D-
T- 160956 - Quantity per axle: 2
- Inner Diameter 1 [mm]: 45
- Inner Diameter 2 [mm]: 43
- Width [mm]: 37
- Outer Diameter [mm]: 82
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter 1 [mm]: 39
- Inner Diameter 2 [mm]: 41
- Weight [kg]: 0.7
- Outer Diameter 1 [mm]: 75
- Width 1 [mm]: 37
- Manufacturer: A.B.S.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Width 1 [mm]: 37
- Outer Diameter 1 [mm]: 75
- Inner Diameter 1 [mm]: 39
- Inner Diameter 2 [mm]: 41
- Manufacturer: GSP
-
Fitting Position: Front Axle Left,
Front Axle Right -
Vehicle Identification Number (VIN) from: 8D-
T- 160956 - Outer Diameter [mm]: 82
- Inner Diameter [mm]: 43
- Width [mm]: 37
-
Lisainfo: Wheel bearing,
front -
Additional information: Wheel bearing,
front
-
Vehicle Identification Number (VIN) from: 8D-
T- 160 956 - Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Bearing Type: Angular Ball Bearing
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) from: 8D-
T- 160956 - Laius (mm): 37
- Siseläbimõõt [mm]: 43
- Välisläbimõõt [mm]: 82
- Manufacturer: DENCKERMANN ZAWIESZENIE
-
Fitting Position: Front Axle Left,
Front Axle Right - Width 1 [mm]: 37
- Outer Diameter 1 [mm]: 82
- Inner Diameter 1 [mm]: 43
- Inner Diameter 2 [mm]: 45
- Manufacturer: GSP
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.83
- Supplementary Article/Info 2: with screw
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Width [mm]: 37
- Outer Diameter [mm]: 75
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Vehicle configuration line / variant: FRRE LR+RE
- for OE number: 8D0598625A
- Inner Diameter [mm]: 39
- Width 1 [mm]: 37
- Number of mounting bores: 1
- Name: DA KWD1058
- Manufacturer: DAYCO
- Fitting Position: Rear Axle
- Laius (mm): 37
- Siseläbimõõt [mm]: 39
- Välisläbimõõt [mm]: 75
- Quality class: PJ
- Name: Wheel bearing kit
-
Vehicle Identification Number (VIN) from: 8D-
T- 160956 - Fitting Position: Front Axle
- Width [mm]: 37
- Outer Diameter [mm]: 82
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
-
Vehicle Identification Number (VIN) from: 8D-
T- 160 956 - Width [mm]: 37
- Outer Diameter [mm]: 82
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 43
- Supplementary Article/Info 2: with screw
- Inner Diameter 2 [mm]: 45
-
Lisainfo: Wheel bearing kit,
for one front wheel -
Additional information: Wheel bearing kit,
for one front wheel
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) from: 8D-
T- 160956 - Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter 1 [mm]: 82
- Manufacturer: METELLI LOZYSKA KOLA PIASTY
- Installatsiooni pool: Esisild
- Laius (mm): 37
-
Kaal (kg): 0,
68 - Siseläbimõõt [mm]: 39
- Välisläbimõõt [mm]: 75
- Manufacturer: METALCAUCHO
-
Vehicle Identification Number (VIN) from: 8D-
T- 160956 -
Fitting Position: Front Axle Left,
Front Axle Right - Quantity per axle: 2
- Outer Diameter [mm]: 82
- Inner Diameter 1 [mm]: 45
- Inner Diameter 2 [mm]: 43
- Width [mm]: 37
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Supplementary Article/Info 2: with screw
- Full Set:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Inner Diameter 2 [mm]: 41
- Manufacturer: OPTIMAL
-
Vehicle Identification Number (VIN) from: 8D-
T- 160 956 - Installatsiooni pool: esisild mõlemapoolselt
- Laius (mm): 37
- Siseläbimõõt [mm]: 43
- Välisläbimõõt [mm]: 82
- Manufacturer: JPN
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) from: 8D-
T- 160956 - Laius (mm): 37
- Siseläbimõõt [mm]: 43
- Välisläbimõõt [mm]: 82
- Quality class: PJ
- Name: Wheel bearing kit
- Model Year from: 1998
- Model Year to: 1999
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.765
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Supplementary Article/Info 2: without wheel hub
- Packaging length [cm]: 8.2
- Packaging width [cm]: 8.2
- Packaging height [cm]: 3.7
- Manufacturer: FEBEST
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) from: 8D-
T- 160956 - Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Inner Diameter 1 [mm]: 45
- Manufacturer: OPTIMAL
- Fitting Position: Front Axle
- Guarantee: 4 years guarantee
- Weight [kg]: 1.86
- Bolt Hole Circle Ø 1 [mm]: 112
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
- Installatsiooni pool: Esisild
- Laius (mm): 37
-
Kaal (kg): 0,
84 - Siseläbimõõt [mm]: 43
- Välisläbimõõt [mm]: 82
- Manufacturer: METALCAUCHO
- Construction Year to: 07.1998
- Fitting Position: Rear Axle
- Required quantity: 2
- Weight [kg]: 0.966
- Packaging length [cm]: 11
- Packaging width [cm]: 9
- Packaging height [cm]: 6
- Outer Diameter [mm]: 75
- Inner Diameter [mm]: 39
- Width [mm]: 37
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Width [mm]: 37
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 713610290
- Vehicle Identification Number (VIN) from: 8D_T_160956
-
Fitting Position: Front Axle Left,
Front Axle Right - Vehicle configuration line / variant: Ch.8D_T_160956 >
- for OE number: 4B0498625A
- Inner Diameter [mm]: 43
- Width 1 [mm]: 37
- Number of mounting bores: 1
- Manufacturer: DAYCO ZESTAWY LOZYSK KOL
- Vehicle Identification Number (VIN) from: ******8D*T*160956
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.036
-
Supplementary Article/Info 2: with bolts/
screws, with nut - Supplementary Article/Supplementary Info: with drive shaft bolt
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) from: 8D-
T- 160 956 - Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Inner Diameter 2 [mm]: 45
- Manufacturer: OPTIMAL
-
Fitting Position: Right,
Left, Rear Axle - Width 1 [mm]: 37
- Inner Diameter 1 [mm]: 39
- Outer Diameter 1 [mm]: 75
- Manufacturer: SNR
- Name: SN R157.13
- Fitting Position: Front Axle
- Guarantee: 4 years guarantee
- Weight [kg]: 1.76
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 29SKV436
- Fitting Position: Rear Axle
- Required quantity: 2
- Width [mm]: 37
- Inner Diameter [mm]: 39
- Outer Diameter [mm]: 75
- Manufacturer: SKF
- Name: SK VKBA1355
-
Fitting Position: Front Axle Left,
Front Axle Right - Vehicle Identification Number (VIN) from: 8DT160956
- Inner Diameter 1 [mm]: 43
- Inner Diameter 2 [mm]: 45
- Weight [kg]: 0.84
- Outer Diameter 1 [mm]: 82
- Width 1 [mm]: 37
- Manufacturer: A.B.S.
- Vehicle Identification Number (VIN) from: ******8D*T*160956
- Width [mm]: 37
-
Inner Diameter [mm]: 43,
45 - Outer Diameter [mm]: 82
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.202
-
Supplementary Article/Supplementary Info: with nuts,
with drive shaft bolt - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 8D-
T- 160956 - Fitting Position: Front Axle
- Required quantity: 2
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Manufacturer: SKF
- Name: SK VKBA1356
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) to: 8D-
T- 160955 - Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 85
- Inner Diameter 2 [mm]: 45
- Manufacturer: OPTIMAL
- Siseläbimõõt [mm]: 43
- Välisläbimõõt [mm]: 82
- Laius (mm): 37
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Vehicle Identification Number (VIN): [;3B-
3- 450 000], [8D- T- 160956;] -
Fitting Position: Right,
Left, Front Axle - Manufacturer: SNR
- Name: SN R157.18
-
Fitting Position: Front Axle Left,
Front Axle Right - Vehicle Identification Number (VIN) to: 8DT160955
- Inner Diameter 1 [mm]: 43
- Outer Diameter 1 [mm]: 85
- Weight [kg]: 0.92
- Width 1 [mm]: 37
- Manufacturer: A.B.S.
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) from: 8D-
T- 160956 - Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Width [mm]: 37
- SVHC: No SVHC present!
- Name: LU 713610350
- Manufacturer: FAG
-
Fitting Position: Right,
Front Axle -
Manufacturer: SNR /
NTN- SNR/ - Name: SN R157.24
- Vehicle Identification Number (VIN) from: ******8D*T*160956
- Width [mm]: 37
-
Inner Diameter [mm]: 43,
45 - Outer Diameter [mm]: 82
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.202
-
Supplementary Article/Supplementary Info: with drive shaft bolt,
with nuts - Name: SW 30 10 0725
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 07.1998
- Fitting Position: Front Axle
- Required quantity: 2
-
Vehicle Identification Number (VIN) from: 8D-
T- 160956 - Weight [kg]: 1.056
- Packaging length [cm]: 10.9
- Packaging width [cm]: 8.4
- Packaging height [cm]: 10.9
- Outer Diameter [mm]: 82
- Inner Diameter [mm]: 43
- Width [mm]: 37
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks