• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Number of Teeth: 28
• Housing Type: without housing
• Impeller Diameter [mm]: 63
• Manufacturer: KAMOKA

• Operating Mode: Electric
• Fabrication Number: CPZ-VW-005
• Manufacturer: NTY

• Number of blades/vanes: 6
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without thermostat
• Name: Water pump
• Quality class: PJ

Water pump impeller material: PPS (polyphen. sulfide)/TFE (tetrafluoroet.)/ACM (polyacryl) Lisainfo: "Tootja: SRL
A1 (8X1), 05.10-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A1 (8X1), 05.10-
(kvaliteediklass: PJ)"

• Material: Plastic
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.37
• Number of connectors: 3
• Always compare old and new part (in particular OE No.):
• Name: CE 22SKV048
• Manufacturer: ESEN SKV

• Voltage [V]: 12
• Number of pins: 2
• Connector Shape: oval
• Operating Mode: Electric
• Supplementary Article/Info 2: with mounting parts
• Name: Lisaveepump (jahutusvee ringlusssteem)
• Manufacturer: MAX

• Housing Type: without housing
• Number of Teeth: 28
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without lid
• Number of blades/vanes: 6
• Water Pump Pulley Diameter [mm]: 43.4
• Impeller Diameter [mm]: 63
• Water pump impeller material: Metal
• Name: VEEPUMP
• Manufacturer: GRA

• Voltage [V]: 12
• for OE number: 5Q0965567
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• General Information: solenoid valve
• Manufacturer: VIKA

• for OE number: 2Q0 965 567
• Manufacturer: KAMOKA

• Guarantee: 3 years guarantee
• Weight [kg]: 0.32
• Always compare old and new part (in particular OE No.):

• Operating Mode: Mechanical
• for OE number: 04E121600CS
• Manufacturer: SASIC

• Housing Type: without housing
• Packaging length [cm]: 21
• Packaging width [cm]: 17.1
• Packaging height [cm]: 15.1
• Weight [kg]: 0.882
• Manufacturer: AKSDASIS

• Manufacturer: JP GROUP
• Lisainfo: Water Pump
• Additional information: Water Pump

• Operating Mode: Electric
• Lisainfo: Additional Water Pump
• Additional information: Additional Water Pump

• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: without housing
• Water Pump Type: for timing belt drive
• Number of Teeth: 28
• Quality: Sealed with SiC/SiC
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Construction Year from: 01.2018
• Voltage [V]: 12
• for OE number: 5Q0965561C
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year to: 08.2018
• Length [mm]: 435
• Number of Teeth: 87
• Width [mm]: 10
• Tooth Pitch [mm]: 5
• Driven Units: Water Pump
• Manufacturer: BOSCH
• Name: BS 1987946958

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Cast Aluminium
• Number of blades/vanes: 6
• Weight [kg]: 0.924
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: Veepump
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Operating Mode: Electric
• Supplementary Article/Info 2: with fastening material
• Manufacturer: NRF

• Weight [kg]: 1.154
• Packaging length [cm]: 20
• Packaging width [cm]: 15
• Packaging height [cm]: 22.5
• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: without housing
• Manufacturer: CONTITECH

• Construction Year to: 08.2018
• Operating Mode: Electric
• Manufacturer: DOLZ
• Name: DO EA555A

• Operating Mode: Mechanical
• Lisainfo: Water Pump
• Additional information: Water Pump

• Construction Year to: 08.2018
• Housing Type: without housing
• Weight [kg]: 0.94
• Manufacturer: DOLZ
• Name: DO A234

• Voltage [V]: 12
• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.25
• for OE number: 2Q0 965 567 A SK
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 08.2018
• Number of Teeth: 81
• Width [mm]: 10
• Number of belts: 1
• for article number: A239
• Manufacturer: DOLZ POMPY WODY

• Driven Units: Water Pump
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Water Pump Type: for toothed belt driven power take-off
• Belt Width [mm]: 10
• for OE number: 04E 121 605 E
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 87
• Name: VEEPUMP
• Manufacturer: SKF

• Driven Units: Water Pump
• Packaging length [cm]: 23.5
• Packaging width [cm]: 19.5
• Packaging height [cm]: 20.9
• Number of Teeth: 87
• Weight [kg]: 1.374
• Width 1 [mm]: 10
• Housing Type: without housing
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON
• Additional information: CT1169WP1
• Lisainfo: CT1169WP1

• Water pump impeller material: Plastic
• Housing Type: with housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with belt, Thermostat fitted in water pump
• Number of Teeth: 28
• Technical Information: SKF Aquamax
• Name: SK VKPA81341
• Manufacturer: SKF

• Voltage [V]: 12
• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.25
• for OE number: 2Q0 965 567 A SK
• Name: SW 33 10 3305
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Water Pump
• Vehicle configuration line / variant: HT -CZEA
• Number of Teeth: 87
• Width [mm]: 10
• Length [mm]: 435
• Full Set:
• Number of belts: 1
• Weight [kg]: 1.8
• Supplementary Article/Info 2: Thermostat fitted in water pump
• Name: Veepump hammasrihmakomplekt
• Manufacturer: DAY

• Manufacturer Restriction: BOSCH
• Manufacturer: YSPARTS

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: without coolant regulator
• Number of blades/vanes: 6
• Manufacturer: HEPU

• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 5G0 965 567
• Supplementary Article/Supplementary Info: with holder
• Flow rate [l/h]: 500
• Manufacturer: HEPU

• Supplementary Article/Info 2: with thermostat
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE

• New Part:
• Construction Year to: 08.2018
• Manufacturer: DOLZ
• Name: DO A262
• Additional information: A-262 DOLZ
• Lisainfo: A-262 DOLZ

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -KTBWP
• Number of Teeth: 163
• Width [mm]: 20
• Length [mm]: 1,141
• Number of Teeth 1: 81
• Width 1 [mm]: 10
• Length 1 [mm]: 405
• Number of belts: 2
• 2 Belts:
• Pulleys contained: 2
• Weight [kg]: 1.9
• Name: DA KTBWP8191
• Manufacturer: DAYCO

• for OE number: 04E121600H
• Housing Type: Synthetic Material Housing
• Weight [g]: 1,544
• Supplementary Article/Info 2: with thermostat, Thermostat fitted in water pump
• Opening Temperature [°C]: 80, 87
• Name: IM 90734
• Manufacturer: ORIGINAL IMPERIUM

• Housing Type: with housing
• Opening Temperature [°C]: 87, 97
• Number of Teeth: 28
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with lid, Thermostat fitted in water pump
• Number of blades/vanes: 6
• Water Pump Pulley Diameter [mm]: 43.4
• Impeller Diameter [mm]: 63
• Water pump impeller material: Metal
• Name: Veepump
• Manufacturer: GRA

• Housing Type: with housing
• Packaging length [cm]: 29.8
• Packaging width [cm]: 17.5
• Packaging height [cm]: 14.5
• Weight [kg]: 1.44
• Manufacturer: AKSDASIS

• Number of track rollers: 2
• Number of belts: 2
• Width 1 [mm]: 20
• Number of Teeth: 163
• Manufacturer: SNR
• Name: SN KDP457.751

• Supplementary Article/Info 2: without thermostat, with bolts/screws
• Number of belts: 2
• Number of Teeth 1: 87
• Width 1 [mm]: 10
• Number of Teeth 2: 163
• Width 2 [mm]: 20
• Pulleys contained: 2
• Manufacturer: HEPU

• Construction Year to: 08.2018
• Housing Type: with housing
• Weight [kg]: 1.53
• Manufacturer: DOLZ
• Name: DO A235

• Water Pump Type: for toothed belt driven power take-off
• Housing Type: with housing
• Number of Teeth 1: 87
• Width 1 [mm]: 10
• Observe service information:
• SVHC: No SVHC present!
• Name: Veepump hammasrihmakomplekt
• Manufacturer: INA

• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: with housing
• Water Pump Type: for timing belt drive
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: Veepump, mootori jahutus
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Aluminium
• Number of Teeth: 28
• Supplementary Article/Info 2: with thermostat
• Number of blades/vanes: 6
• Weight [kg]: 1.53
• Housing Type: with housing
• for OE number: 04E 121 600 CS
• Observe service information:
• Name: Veepump
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 1.92
• Packaging length [cm]: 20
• Packaging width [cm]: 15
• Packaging height [cm]: 22.5
• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: Metal Housing
• Manufacturer: CONTINENTAL CTAM

• Number of track rollers: 2
• Number of belts: 2
• Number of Teeth: 163
• Width 1 [mm]: 20
• Number of Teeth 2: 87
• Width 2 [mm]: 10
• Manufacturer: SNR /NTN-SNR/

• Number of bolts/screws: 1
• Water pump impeller material: Metal
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth 1: 163
• Number of Teeth 2: 87
• Width 1 [mm]: 20.1
• Width 2 [mm]: 10
• Name: SK VKMC01280
• Manufacturer: SKF

• Housing Type: with housing
• Number of Teeth 1: 163
• Width 1 [mm]: 20
• Supplementary Article/Info 2: with lid
• Manufacturer: METELLI ROZRZAD

• Driven Units: Camshaft, Water Pump
• Packaging length [cm]: 23.5
• Packaging width [cm]: 19.5
• Packaging height [cm]: 20.9
• Weight [kg]: 2.341
• Width 1 [mm]: 20
• Width 2 [mm]: 10
• 2 Belts:
• Number of Teeth 2: 87
• Number of Teeth 1: 163
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gaskets/seals
• Housing Type: Synthetic Material Housing
• Manufacturer: HEPU

Supplementary Article/Info 2: with thermal management module, with bore for sensor

• Construction Year to: 10.2018
• Water Pump Type: for toothed belt driven power take-off
• Housing Type: with housing
• Pulleys: with belt pulley
• Opening Temperature [°C]: 87, 97
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 538036310

• General Information: Water pump assembly
• Manufacturer: BORSEHUNG

• Driven Units: Water Pump
• Packaging length [cm]: 31.1
• Packaging width [cm]: 27.6
• Packaging height [cm]: 20.9
• Number of Teeth: 87
• Weight [kg]: 2.1
• Width 1 [mm]: 10
• Housing Type: Metal Housing
• Manufacturer: CONTINENTAL CTAM

• General Information: Water pump; with belt; 1.0; 1.2; 1.6
• Manufacturer: BORSEHUNG

• Supplementary Article/Info 2: Thermostat fitted in water pump, with bolts/screws
• Number of belts: 2
• Number of Teeth 1: 87
• Width 1 [mm]: 10
• Number of Teeth 2: 163
• Width 2 [mm]: 20
• Pulleys contained: 2
• Manufacturer: HEPU

• Number of Teeth: 87
• Opening Temperature [°C]: 105, 80
• Housing Type: with housing, Synthetic Material Housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with belt, with thermostat, with bolts/screws
• for OE number: 04E 121 605 E
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.