Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)




- Colour Coding: grey
- Number of pins: 2
- Manufacturer: JP GROUP
-
Lisainfo: Sender for water temperature gauge,
2 pins -
Additional information: Sender for water temperature gauge,
2 pins




- Engine Code: CZEA
- Number of pins: 2
- Connector Shape: D Shape
-
Manufacturer: JP GROUP A/
S - Lisainfo: Coolant Temperature Sensor
- Additional information: Coolant Temperature Sensor


- Pressure [bar]: 2.5
- General Information: oil pressure switch;2.5Bar
- Manufacturer: VIKA




- Switch point from [bar]: 0.3
- Switch point to [bar]: 0.6
- Colour Coding: green
- Number of connectors: 1
- External Thread [mm]: M10X1
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk


- Connector Shape: D Shape
- Operating Mode: Hydraulic
- Colour Coding: green
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 1
-
Control Range [bar]: 0,
3 - 0, 6 - Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.





-
Fabrication Number: ECC-
AU- 003 - Thread Size: M10x1
- Spanner Size: 24
- Supplementary Article/Info 2: with seal ring
- Socket colour: green
- Number of pins: 1
- Manufacturer: NTY
-
Name: NTY ECC-
AU- 003
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.





-
Fabrication Number: ECC-
AU- 009 -
Thread Size: M10x1,
0 - Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Socket colour: blue
- Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Thread Size: M10x1
- Spanner Size: 22
- Colour Coding: green
- Number of pins: 1
- Pressure from [bar]: 0.3
- Pressure to [bar]: 0.6
- Name: OLISURVELLITUS
- Manufacturer: MAX


- Weight [kg]: 0.015
- Number of connectors: 2
- Screw length below head [mm]: 20
- Colour: black
- Colour Coding: grey
- General Information: temperature sensor; black
- Manufacturer: VIKA





- Fitting Depth [mm]: 29
- Housing Colour: black
- Manufacturer: KAMOKA


-
Connector Shape: oval,
D Shape - Colour Coding: grey
- Sensor Type: NTC Sensor
- Number of pins: 2
- Consult accessories list for recommended additional repairs:
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- General Information: oil pressure switch
- Manufacturer: VIKA






- Colour: black
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 2
-
Fabrication Number: ECT-
VW- 002 - Manufacturer: NTY
-
Name: NTY ECT-
VW- 002
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Colour: dark green
- Pressure [bar]: 6
- Housing Colour: green
- Thread Size: M10x1.0
- Diameter [mm]: 24
- Spanner Size: 24
- Number of pins: 1
- Name: OLISURVELLITUS
- Manufacturer: DLP
- Lisainfo: SW90024
- Additional information: SW90024


- Engine Code: CZEA
- Colour: green
- Pressure to [bar]: 0.6
- Pressure from [bar]: 0.3
- Pressure [bar]: 0.5
- Thread Size: M10x1
- Spanner Size: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS


- Engine Code: CZEA
- Colour: green
- Pressure to [bar]: 0.6
- Pressure from [bar]: 0.3
- Pressure [bar]: 0.5
- Thread Size: M10x1
- Spanner Size: 24
- Manufacturer: FACET




- Thread Size: M10 x 1
- Spanner Size: 24
- Number of pins: 1
- Supplementary Article/Info 2: with seal ring
- Pressure [bar]: 0.45
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.


- Switch Pressure [bar]: 0.5
- Thread Size: M10x1.0
-
Sensor Type: Open-
style sensor - Manufacturer: VERNET


- Number of mounting bores: 1
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Fitted Diameter [mm]: 9
- Colour Coding: green
- Housing Colour: black
-
Connector Shape: D Shape,
oval - General Information: temperature sensor
- Manufacturer: VIKA














































- Sensor Type: NTC Sensor
- Mounting Type: Clamped
- Connector Shape: D Shape
- Number of pins: 2
- for OE number: 06A919501
- Supplementary Article/Info 2: with mounting parts
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF


- General Information: Oil pressure sensor
- Manufacturer: BORSEHUNG


- Switch Pressure [bar]: 2.5
- Thread Size: M10x1.0
-
Sensor Type: Open-
style sensor - Manufacturer: VERNET





- Pressure [bar]: 2.5
- Thread Size: M10 x 1
- Number of pins: 1
- Technical Information Number: circuit N.O.
- Manufacturer: ERA


- General Information: temperature sensor
- Manufacturer: VIKA


- Engine Code: CZEA
- Colour Coding: grey
-
for article number: 1.660.015K,
1.830.278K, 1.879.946 -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
-
Additional information: 1-
830- 278 -
Lisainfo: 1-
830- 278


- Engine Code: CZEA
- Colour Coding: grey
-
for article number: 26.0015K,
7.3278K, 7.7946 - Manufacturer: FACET





- Thread Size: M20
- Number of pins: 2
- Housing Colour: grey
- Connector Shape: oval
- Manufacturer: ERA


- Switch point from [bar]: 0.3
- Switch point to [bar]: 0.6
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 1
- Colour Coding: green
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: OLISURVELLITUS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- General Information: temperature sensor
- Manufacturer: VIKA





























































- Thread Size: M 10 x 1
-
Control Range [bar]: 0,
3- 0, 6 - Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.



- Length [mm]: 516
- External Thread Size: M8 x 1
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: blue
- Shifting Points [bar]: 2.4
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Switch point from [bar]: 0.3
- Switch point to [bar]: 0.6
- External Thread Size: M10 x 1
- Spanner Size: 22
- Number of connectors: 1
- Colour Coding: green
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 91 9014
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: with seal ring
- Colour: black
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY



- Length [mm]: 516
- External Thread Size: M8 x 1
- Spanner Size: 24
- Number of connectors: 1
- Colour Coding: blue
- Shifting Points [bar]: 2.4
- Weight [kg]: 0.031
- Supplementary Article/Info 2: with seal ring
- Name: SW 33 10 7825
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Engine Code: CZEA
- Colour: blue
- Pressure to [bar]: 2.95
- Pressure from [bar]: 2.15
- Pressure [bar]: 2.5
- Thread Size: M10x1
- Spanner Size: 24
- Corresponds to the original part in colour: violet
- Manufacturer: FACET


- Colour Coding: blue
- Thread Size: M 10
- Thread Pitch [mm]: 1
- Number of pins: 1
- Switch point from [bar]: 2.15
- Switch point to [bar]: 2.95
- Supplementary Article/Info 2: with seal ring
- Connector Shape: D Shape
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Number of pins: 2
- Plug Type: Blade Terminal
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.


-
Control Range [bar]: 2.15/
2.95BAR - Colour: blue
-
General Information: Oil pressure sensor; 1 pin; blue; 2.15-
2.95 BAR - Manufacturer: BORSEHUNG


- Engine Code: CZEA
- Colour: blue
- Pressure to [bar]: 2.95
- Pressure from [bar]: 2.15
- Pressure [bar]: 2.5
- Thread Size: M10x1
- Spanner Size: 24
- Corresponds to the original part in colour: violet
- Manufacturer: EPS


- Colour: black
- Number of pins: 2
- Name: DETONATSIOONIANDUR
- Manufacturer: MAX






- Supplementary Article/Info 2: without cable
- Socket colour: black
-
Fabrication Number: ESS-
VW- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.



- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.03
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Name: SW 30 92 9318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- General Information: Coolant temperature sensor
- Manufacturer: BORSEHUNG


- Screw length below head [mm]: 20
- Weight [kg]: 0.015
- Number of connectors: 2
- Colour Coding: grey
- General Information: Coolant temperature sensor; 2 pin; black; grey
- Manufacturer: BORSEHUNG


- Engine Code: CZEA
- Housing Colour: black
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS





- Length [mm]: 24
- Required quantity: 1
- Sensor Type: Hall Sensor
- Number of pins: 3
-
Fabrication Number: ECP-
AU- 029 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.


- Engine Code: CZEA
- Housing Colour: black
- Manufacturer: FACET













































- Sensor Type: NTC Sensor
- Mounting Type: Screw Connection
- Connector Shape: D Shape
- Number of pins: 2
- Socket colour: black
- for OE number: 03F919501A
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: NRF


- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Connector Shape: D Shape
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Connector Shape: D Shape
- General Information: coolant temperature sensor
- Manufacturer: BORSEHUNG


- Number of pins: 2
- Connector Shape: D Shape
- Supplementary Article/Info 2: without cable
- for OE number: 1205185
- Manufacturer: MEAT&DORIA






























































- Diameter [mm]: 26
- Number of pins: 2
- Supplementary Article/Info 2: with seal ring
- Spring Design: Retaining Spring
- Length [mm]: 20
- Housing Colour: blue
- Height [mm]: 57
- Colour: grey
- Number of connectors: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.


- for OE number: 03F 919 501 B
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: TRU







- Version: 1
- Connector Shape: D Shape
- Material: Plastic
- Number of pins: 2
- Plug Type: Female
- Sensor Type: NTC Sensor
- Spanner Size: 0
- Thread Size: 0
- Manufacturer: NISSENS
Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.



- Observe technical data:
- Manufacturer Restriction: VAG
- Number of pins: 2
- Cable Length [mm]: 500
- Cable Cross Section [mm²]: 0.75
- Socket Width [mm]: 1.5
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: +125
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
- Cable insulation material: Silicone
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
tagatuli - Manufacturer: HBE


- Weight [kg]: 0.48
- Number of connectors: 2
- Colour: black
- General Information: knock sensor
- Manufacturer: VIKA



- Number of pins: 3
- Fitting Depth [mm]: 24
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MAX


- Number of pins: 3
- Connector Shape: D Shape
- Shape: angled
- Number of mounting bores: 1
-
Supplementary Article/Info 2: with screw,
without cable - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- General Information: camshaft position sensor
- Manufacturer: BORSEHUNG





- Colour: black
- Number of pins: 2
- Weight [kg]: 0.058
- Manufacturer: ERA


- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Fitting Depth [mm]: 24
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF





- Number of connectors: 2
- Manufacturer: ERA










































































- Number of pins: 3
- Manufacturer: DELPHI
- Name: DE SS11473






-
Fabrication Number: ECP-
AU- 039 - Number of pins: 3
- Sensor Type: Active sensor
- Connector Shape: oval
- Supplementary Article/Info 2: without cable
- Manufacturer: NTY
-
Name: NTY ECP-
AU- 039


- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.011
- for OE number: 03F 919 501 B
- Name: SW 30 10 6571
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Number of pins: 2
- Connector Shape: D Shape
- Supplementary Article/Info 2: with seal ring
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.011
- for OE number: 03F 919 501 B
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Number of connectors: 3
- Weight [kg]: 0.023
- for OE number: 04C 906 433 G
- Supplementary Article/Info 2: with screw
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Construction Year from: 08.2018
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: FAE ELEKTRYKA


- Engine Code: CZEA
- Required quantity: 1
- Housing Colour: black
- Name: EP 1.957.144
- Manufacturer: EPS


- Engine Code: CZEA
- Required quantity: 1
- Housing Colour: black
- Manufacturer: FACET


- Number of pins: 2
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
-
for OE number: 03F919501B,
04E919501C



- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with screw
- Number of pins: 3
-
Name: Andur,
vntvoll - Manufacturer: MEY


- Construction Year to: 08.2018
- Required quantity: 2
- Engine Code: CZEA
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with seal ring
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU009168401
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Number of connectors: 3
- Weight [kg]: 0.023
- for OE number: 04C 906 433 G
- Supplementary Article/Info 2: with screw
- Name: SW 33 10 2812
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.


- Number of pins: 3
- Manufacturer: DELPHI ELEKTRONIKA



- Number of pins: 2
- Colour: black
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.






- Sensor Type: Hall Sensor
- Manufacturer: FAE ELEKTRYKA



- Engine Code: CZEA
- Sensor Type: NTC Sensor
- Supplementary Article/Info 2: with seal ring
- Number of pins: 2
- Manufacturer: MEYLE



- Construction Year to: 08.2018
- Number of pins: 3
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PU009168741
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Number of pins: 3
- Sensor Type: Hall Sensor
-
Supplementary Article/Info 2: with seal ring,
without cable - Connector Shape: oval
-
for OE number: 04C 907 601K,
958 907 601 00 - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- General Information: hall sender camshaft
- Manufacturer: VIKA


- Engine Code: CZEA
- Required quantity: 2
- Name: EP 1.953.793
- Manufacturer: EPS


- Construction Year to: 08.2018
- Required quantity: 1
- Engine Code: CZEA
- Voltage [V]: 12
- Number of pins: 2
- Tightening Torque [Nm]: 20
- Supplementary Article/Info 2: without cable
- Corresponds to the original part in colour: black
- Plug Type: Blade Terminal
- Connector Shape: oval
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PG013114301
Brief Information: *** HELLA Electronics OE competence for over 60 years.


- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.48
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.



- for PR number: DG6
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with seal ring
- Number of pins: 3
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MEY






























- Construction Year to: 08.2018
- Name: DETONATSIOONIANDUR
- Manufacturer: BOS


Manufacturer: MAGNETI MARELLI


- General Information: impulse sender; crackshaft
- Manufacturer: VIKA










































































- Number of pins: 2
- Manufacturer: DELPHI
- Name: DE AS10169




- Guarantee: 5 years guarantee
- Number of pins: 3
- Sensor Type: Hall Sensor
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO


- Required quantity: 1
- Number of pins: 3
- Sensor Type: Inductive Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: grey
- Manufacturer: BREMI


- General Information: hall sender camshaft
- Manufacturer: VIKA





- Sensor Type: Hall Sensor
- Alternatively:
- Number of pins: 3
- Connector Shape: oval
- Alternative Repair Kit: 551675
- Manufacturer: ERA



- Manufacturer Restriction: VAG
- Plug Type ID: Code A
- Cable Length [mm]: 175
- Number of pins: 3
- Cable Cross Section [mm²]: 0.75
-
Contact surface: Silver-
plated - Cable insulation material: Silicone
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
heitgaasi rohuandur - Manufacturer: HBE






























- Construction Year to: 08.2018
- Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY


- General Information: Crankshaft position sensor
- Manufacturer: BORSEHUNG


- Engine Code: CZEA
- Number of pins: 2
- Colour: black
- Name: Detonatsiooniandur
- Manufacturer: VDO






- Oxygen Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Cable Length [mm]: 970
- Guarantee: 3 years guarantee
- Weight [kg]: 0.15
- Conductor Number: 4
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV126





- Exhaust System: after catalytic converter
-
Oxygen Sensor: Finger-
type Sensor -
Thread Size: M18 x 1,
5 - Cable Length [mm]: 800
- Number of pins: 4
- Guarantee: 3 years guarantee
- Weight [kg]: 0.13
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV127


-
Oxygen Sensor: Diagnostic Probe,
Heated - Fitting Position: after catalytic converter
- Rated Voltage [V]: 12
- Number of pins: 4
- Connector Shape: D Shape
- Cable Length [mm]: 837
- Overall Length [mm]: 870
- Spanner Size: 22
- Thread Size: M 18
- Thread Pitch [mm]: 1.5
- Thread Length [mm]: 9
-
Supplementary Article/Info 2: with cable,
with heat shield pipe - Lubrication: with grease lubrication
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.


- Construction Year to: 08.2018
- Required quantity: 1
- Engine Code: CZEA
- Voltage [V]: 12
- Number of pins: 2
- Tightening Torque [Nm]: 20
- Supplementary Article/Info 2: without cable
- Corresponds to the original part in colour: black
- Plug Type: Blade Terminal
- Connector Shape: oval
- Quantity: 1
- Assy./disassy. by qualified personnel required!:
- Name: HE 6PG009108561
- Manufacturer: HELLA
SVHC: 1317-36-8; Lead monoxide (lead oxide), 12060-00-3; Lead titanium trioxide, 7439-92-1; Lead Brief Information: *** HELLA Electronics OE competence for over 60 years.


-
Oxygen Sensor: Finger-
type Sensor - Fitting Position: Front
- General Information: lambda probe; front
- Manufacturer: VIKA


























-
Oxygen Sensor: Diagnostic Probe,
Planar Sensor, Heated - Fitting Position: after catalytic converter
-
Cable Length [mm]: 1,
060 -
Name: SONDA LAMBDA A3,
Q2, Q3 11- - Manufacturer: DLP


- Engine Code: CZEA
- Fitting Position: after catalytic converter
- Required quantity: 1
- Cable Length [mm]: 800
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.997.007
- Number of circuits: 4
- Name: LAMBDA ANDUR
- Manufacturer: EPS
- Additional information: EP 1.998.199
- Lisainfo: EP 1.998.199
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased


- Engine Code: CZEA
- Fitting Position: after catalytic converter
- Required quantity: 1
- Cable Length [mm]: 800
- Conductor Number: 4
- Available as universal article as well, see article no.: 10.7007
- Number of circuits: 4
- Manufacturer: FACET
Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased


-
Oxygen Sensor: Finger-
type Sensor - Fitting Position: Front
- General Information: lambda probe; front
- Manufacturer: VIKA


-
Oxygen Sensor: Regulating Sensor,
Planar Sensor, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 570
-
Name: DE ES21089-
12B1 - Manufacturer: DELPHI


- General Information: Oil pressure sensor
- Manufacturer: BORSEHUNG


-
Oxygen Sensor: Diagnostic Probe,
Broadband Oxygen Sensor, Heated - Fitting Position: after catalytic converter
- Cable Length [mm]: 540
- Manufacturer: DELPHI
-
Name: DE ES21056-
12B1


- Engine Code: CZEA
- Fitting Position: before catalytic converter
- Required quantity: 1
- Cable Length [mm]: 650
- Conductor Number: 4
- Available as universal article as well, see article no.: 1.997.007
- Number of circuits: 4
- Name: LAMBDA ANDUR
- Manufacturer: EPS
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased


- Engine Code: CZEA
- Fitting Position: before catalytic converter
- Required quantity: 1
- Cable Length [mm]: 650
- Conductor Number: 4
- Available as universal article as well, see article no.: 10.7007
- Number of circuits: 4
- Manufacturer: FACET
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased



-
Oxygen Sensor: Planar Sensor,
Thread pre- greased, Heated - Number of pins: 4
- Cable Length [mm]: 800
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Name: VA 368097
- Manufacturer: VALEO
Fitting Position: before catalytic converter, after catalytic converter


-
Oxygen Sensor: Switching-
type Oxygen Sensor - Fitting Position: Front
- General Information: lambda probe; front
- Manufacturer: VIKA


- Oxygen Sensor: Diagnostic Probe
- Number of pins: 4
- Cable Length [mm]: 970
- Quality: OE EQUIVALENT
- for OE number: 04E906262BA
- Manufacturer: MEAT&DORIA