• Observe technical data:
• Manufacturer Restriction: VAG
• Number of pins: 2
• Cable Length [mm]: 500
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -40
• Temperature range to [°C]: +125
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Engine Code: DFGA
• Thread Size: M12x1,5
• Spanner Size: 16
• Manufacturer: FACET

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: ESEN SKV

• General Information: Pressure difference sensor
• Manufacturer: BORSEHUNG

• Number of pins: 3
• Pressure [Pa] from: 48,500
• Pressure [Pa] to: 400,000
• Manufacturer: FAE

• Number of pins: 3
• Connector Shape: D Shape
• Number of connectors: 1
• for OE number: 04L906051B
• Manufacturer: MEAT&DORIA

• Exhaust System: before soot particulate filter
• Emission Standard: Euro 6, Euro 6+
• for PR number: 4BF, 7CP, 7CS, 7MM
• Connector Shape: oval
• Number of pins: 3
• Pressure [Pa] from: -14,000
• Pressure [Pa] to: 100,000
• Name: Andur, heitgaasisurve
• Manufacturer: NRF

• Engine Code: DFGA
• for PR number: 7MM
• Emission Standard: Euro 6+
• Exhaust System: before soot particulate filter
• Manufacturer: FACET

• Exhaust System: before soot particulate filter
• Emission Standard: Euro 6
• for PR number: 4BF, 7CP, 7CS, 7MM
• Number of pins: 3
• Opening pressure [kPa]: 14
• Manufacturer: DLP

Name: CZUJNIK CI—NIENIA SPALIN VW ARTEON, CADDY, CRAFTER, GOLF 12-

• Construction Year from: 10.2016
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 520
• Overall Length [mm]: 685
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: PTC
• Manufacturer: VALEO

• Fabrication Number: EGT-SK-008
• Cable Length [mm]: 850

• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Fitting Position: before catalytic converter
• Cable Length [mm]: 1,060
• Name: SONDA LAMBDA A3, Q2, Q3 11-
• Manufacturer: DLP

• Required quantity: 1
• Engine Code: DTTC
• Mounting Type: Bolted
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: Andur, heitgaasisurve
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 1
• Emission Standard: Euro 6+
• Fitting Position: before soot particulate filter
• Version: 2
• for PR number: 7MM
• Connector Shape: D Shape
• Cable Length [mm]: 850
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Required quantity: 1
• Emission Standard: Euro 6+
• Fitting Position: before catalytic converter
• for PR number: 7MM
• Supplementary Article/Supplementary Info: with synthetic grease
• Manufacturer: NRF

• Spanner Size: 17
• Number of pins: 2
• Fabrication Number: EGT-SK-002
• Cable Length [mm]: 730
• Manufacturer: NTY

• Construction Year from: 10.2016
• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 740
• Overall Length [mm]: 850
• Number of pins: 2
• Connector Shape: oval
• Socket colour: brown
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: NTC Sensor
• Name: VA 369040
• Manufacturer: VALEO

• Exhaust System: before soot particulate filter
• Emission Standard: Euro 6+
• for PR number: 7MM
• Engine Code: DFGA
• Mounting Type: Bolted
• Number of pins: 3
• Diameter 1 [mm]: 8
• Diameter 2 [mm]: 8
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP009403221
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: DFGA
• Sensor Type: Differential Pressure Sensor
• Output Voltage, up to [V]: 5
• Measuring Range from [kPa]: -14
• Measuring Range to [kPa]: 100
• Number of pins: 3
• Number of mounting bores: 1
• Supplementary Article/Supplementary Info: without accessories
• Fitting Position: Soot Particulate Filter
• Manufacturer: PIERBURG

• Quantity: 1
• Version: 1
• for PR number: 7MM
• for OE number: 04L 906 088 DN
• Cable Length [mm]: 640
• Number of pins: 2
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: before soot particulate filter
• Socket colour: brown
• Weight [kg]: 0.09
• Shape: L Shape
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV361

• Supplementary Article/Info 2: with cable
• Cable Length [mm]: 650
• Overall Length [mm]: 760
• Number of pins: 2
• Connector Shape: oval
• Socket colour: black
• Thread Size: M14 x 1,5
• Spanner Size: 17
• Sensor Type: NTC Sensor
• Manufacturer: VALEO

• Required quantity: 1
• Emission Standard: Euro 6+
• Fitting Position: before soot particulate filter
• Version: 1
• for PR number: 7MM
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 25
• Cable Length [mm]: 615
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Fitting Position: before exhaust turbocharger
• Number of connectors: 2
• Weight [kg]: 0.07
• for OE number: 04L 906 088 HT
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Exhaust System: before turbocharger
• for PR number: 7MM
• Cable Length [mm]: 520
• Number of pins: 2
• Manufacturer: DELPHI
• Name: DE TS30176

• Engine Code: DCYA
• Construction Year to: 07.2019
• Name: Andur, heitgaasisurve
• Manufacturer: BOS

• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Manufacturer: MEYLE

• General Information: Exhaust Gas Temperature Sensor
• Manufacturer: VIKA

• Engine Code: DCYA
• Emission Standard: Euro 6
• Exhaust System: before soot particulate filter
• Manufacturer: JAPKO

• Pressure hose connector diameter [mm]: 5, 6.5
• Length [m]: 1
• Material: Silicone
• Chemical Properties: Oil resistant
• Temperature range from [°C]: -40
• Temperature range to [°C]: +350
• Clamping Range from [mm]: 10, 11, 11.5, 12.5
• Clamping Range to [mm]: 12.5, 13.5, 14, 15
• SVHC: No SVHC present!
• Manufacturer: HBE

Exhaust System: for vehicles with factory fitted soot -/particulate filter Supplementary Article/Info 2: with connection line, with protection hose, with marten protection, with clamps Technical Information: Using this repair kit, defective connecting hoses between the diesel particle filter (DPF) and the differential pressure sensor can be quickly and simply replaced. Pine marten bites may also be responsible for damage, and not just mechanical and thermic influences. That's why this set is supplied with protective hoses that are resistant to both high temperatures and pine marten bites. They protect the silicone pressure lines from external influences. The spring band clamps included in the scope of supply ensure that the hoses are held securely. Name: Remondikomplekt, survetorustik (tahma-/partiklifilter)

• Required quantity: 1
• Emission Standard: Euro 6, Euro 6+
• Fitting Position: before exhaust turbocharger
• for PR number: 4BF, 7CP, 7MM
• Connector Shape: D Shape
• Number of pins: 2
• Voltage [V]: 12
• Fitting Depth [mm]: 25
• Cable Length [mm]: 504
• Thread Size: M14x1.5
• Supplementary Article/Supplementary Info: with synthetic grease
• Name: Andur, heitgaasitemperatuur
• Manufacturer: NRF

• Fabrication Number: EGT-AU-043
• Cable Length [mm]: 650
• Manufacturer: NTY

• for OE number: 04L 906 088 BB
• Cable Length [mm]: 740
• Number of pins: 2
• Connector Shape: D Shape
• Guarantee: 3 years guarantee
• Exhaust System: before soot particulate filter
• Socket colour: brown
• Weight [kg]: 0.09
• Shape: L Shape
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV371

• Fitting Position: after soot particulate filter
• Engine Code: DFGA
• Number of pins: 2
• Cable Length [mm]: 880
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Oxygen Sensor: Regulating Sensor, Broadband Oxygen Sensor, Heated
• Fitting Position: before catalytic converter
• Quantity: 1
• Cable Length [mm]: 540
• Manufacturer: DELPHI
• Name: DE ES21056-12B1

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Length [mm]: 1,216
• Number of circuits: 5
• Fitting Position: after catalytic converter
• Fabrication Number: ESL-AU-017
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe, Broadband Oxygen Sensor, Heated
• Fitting Position: after catalytic converter
• Cable Length [mm]: 1,296
• Name: DE ES21063-12B1
• Manufacturer: DELPHI

• Voltage [V]: 12
• Cable Length [mm]: 735
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 30SKV228

• Engine Code: DFGA
• Operating Mode: Electric
• Voltage [V]: 5
• Conductor Number: 2
• Cable Length [mm]: 550
• Thread Size: M14 x 1,5
• Total Length [mm]: 662
• Fitting Position: before exhaust turbocharger
• Name: Andur, heitgaasitemperatuur
• Manufacturer: PIE

• Fitting Position: Soot Particulate Filter
• Number of pins: 3
• Manufacturer: METZGER

• Exhaust System: before soot particulate filter
• for PR number: 7MM
• Cable Length [mm]: 850
• Number of pins: 2
• Name: DE TS30348-12B1
• Manufacturer: DELPHI

• Exhaust System: before soot particulate filter
• Version: 1
• Quantity: 1
• for PR number: 7MM
• Cable Length [mm]: 740
• Number of pins: 2
• Name: DE TS30345-12B1
• Manufacturer: DELPHI

• Exhaust System: after soot particulate filter
• Emission Standard: Euro 6
• Quantity: 1
• for PR number: 4BF, 7MM
• Cable Length [mm]: 710
• Number of pins: 2
• Manufacturer: DLP

Name: CZUJNIK TEMP. SPALIN VW ARTEON, CADDY, GOLF, JETTA, PASSAT, SCIROCCO, TIGUAN, TOURAN, T-ROC 03-

• Fitting Position: before exhaust turbocharger
• Emission Standard: Euro 6+
• Required quantity: 1
• for PR number: 7MM
• Engine Code: DFGA
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 540
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT014495101
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: before soot particulate filter
• Engine Code: DFGA
• Number of pins: 2
• Cable Length [mm]: 790
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Fitting Position: before catalytic converter
• Engine Code: DFGA
• Number of pins: 2
• Cable Length [mm]: 690
• Sensor Type: NTC Sensor
• Name: Andur, heitgaasitemperatuur
• Manufacturer: MEY

• Fitting Position: before exhaust turbocharger
• for PR number: 7MM
• Cable Length [mm]: 505
• Number of pins: 2
• Colour: black
• Alternative Repair Kit: 0894306
• Manufacturer: METZGER

• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: brown
• Cable Length [mm]: 740
• for OE number: 04L906088JE
• Manufacturer: MEAT&DORIA

• Engine Code: DCYA
• Construction Year to: 07.2019
• Fitting Position: before exhaust turbocharger
• Cable Length [mm]: 504
• Manufacturer: BOSCH OSPRZET SILNIK BENZYNOWY

• Exhaust System: before catalytic converter
• for PR number: 7MM
• Cable Length [mm]: 645
• Number of pins: 2
• Name: DE TS30339-12B1
• Manufacturer: DELPHI

• Fitting Position: before catalytic converter
• for PR number: 7MM
• Shape: angled
• Number of pins: 2
• Connector Shape: D Shape
• Temperature range from [°C]: -40
• Temperature range to [°C]: 900
• Manufacturer: VEMO GERMANY

General Information: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.

• Engine Code: DFGA
• Construction Year to: 08.2018
• Fitting Position: before exhaust turbocharger
• Name: Andur, heitgaasitemperatuur
• Manufacturer: BOS

• Fitting Position: after soot particulate filter
• Emission Standard: Euro 6+
• Required quantity: 1
• for PR number: 7MM
• Engine Code: DFGA
• Mounting Type: Bolted
• Number of pins: 2
• Cable Length [mm]: 880
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT358226431
• Manufacturer: HELLA

• Oxygen Sensor: Heated
• General Information: lambda probe; 5 wire
• Manufacturer: VIKA

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• for combined PR number: 1E9+TR1+7MM
• Fitting Position: before catalytic converter
• Name: DRM 02367
• Manufacturer: DR.MOTOR AUTOMOTIVE

• for combined PR number: TR1+4BF, TR1+4IF, TR1+7CP, TR1+7CS, TR1+7CW
• Fitting Position: after soot particulate filter
• Name: DRM 02374
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• for combined PR number: 7CS+TR1
• Fitting Position: before catalytic converter
• Name: DRM 02360
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Voltage [V]: 12
• Cable Length [mm]: 890
• Number of pins: 5
• for OE number: 04L907807AD
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: behind exhaust turbocharger
• Voltage [V]: 12
• Cable Length [mm]: 790
• Number of mounting bores: 2
• Number of pins: 5
• for OE number: 04L907807BQ
• Connector Shape: oval
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Voltage [V]: 12
• Cable Length [mm]: 890
• Number of pins: 5
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.37
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 71SKV061

Fitting Position: before catalytic converter, after catalytic converter

• Voltage [V]: 12
• Cable Length [mm]: 890
• Number of pins: 5
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.34
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 71SKV059

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 03.2018
• Fitting Position: before catalytic converter
• Emission Standard: Euro 6+
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Engine Code: DFGA
• for PR number: 7MM, L0R
• Cable Length [mm]: 840
• Number of pins: 5
• Thread Size: M20*1.5
• Connector Shape: oval
• Name: DE ANS1060-12B1
• Manufacturer: DELPHI

• Construction Year to: 07.2020
• Cable Length [mm]: 890
• Thread Size: M20X1,5
• Number of pins: 5
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PN358307021
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Cable Length [mm]: 790
• Number of pins: 5
• Thread Size: M20*1.5
• Connector Shape: oval
• Manufacturer: DELPHI ELEKTRONIKA

• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Exhaust System: before catalytic converter
• for PR number: 7CP
• Voltage [V]: 12
• Cable Length [mm]: 890
• Number of pins: 5
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Weight [kg]: 0.34
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 71SKV068

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 07.2020
• Fitting Position: before catalytic converter
• Emission Standard: Euro 6+
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Engine Code: DFGA
• for PR number: 7MM, L0L
• Cable Length [mm]: 890
• Number of pins: 5
• Thread Size: M20
• Connector Shape: oval
• Name: DE ANS1018-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Fitting Position: Front
• General Information: NOx sensor; front; 12V
• Manufacturer: VIKA

• Fitting Position: after soot particulate filter
• Emission Standard: Euro 6
• Engine Code: DFGA
• for PR number: 4BF, 7CP, 7CS
• Cable Length [mm]: 590
• Number of pins: 5
• Thread Size: M20
• Connector Shape: oval
• Name: DE ANS1000-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Fitting Position: Front
• General Information: NOx sensor; front; 12V
• Manufacturer: VIKA

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Fitting Position: Front
• General Information: NOx sensor; front; 12V
• Manufacturer: VIKA

• for combined PR number: TR1+7CW, TR1+7CP, TR1+7CS, TR1+4BF, TR1+4IF
• Version: IAM
• Fitting Position: after soot particulate filter
• Overall Length [mm]: 801
• Manufacturer: METZGER

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• General Information: NOx sensor; front; 12V
• Manufacturer: VIKA

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• for combined PR number: 1E9+TR1+7MM
• Fitting Position: before catalytic converter
• Manufacturer: METZGER

Exhaust System: for vehicles with factory fitted soot -/particulate filter