• Number of Teeth: 28
• Housing Type: without housing
• Impeller Diameter [mm]: 63
• Manufacturer: KAMOKA

• Operating Mode: Electric
• Fabrication Number: CPZ-VW-005
• Manufacturer: NTY

• Voltage [V]: 12
• Number of pins: 2
• Connector Shape: oval
• Operating Mode: Electric
• Supplementary Article/Info 2: with mounting parts
• Name: Lisaveepump (jahutusvee ringlusssteem)
• Manufacturer: MAX

• Housing Type: without housing
• Number of Teeth: 28
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without lid
• Number of blades/vanes: 6
• Water Pump Pulley Diameter [mm]: 43.4
• Impeller Diameter [mm]: 63
• Water pump impeller material: Metal
• Name: VEEPUMP
• Manufacturer: GRA

• Number of blades/vanes: 6
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: without thermostat
• Name: Water pump
• Quality class: PJ

Water pump impeller material: PPS (polyphen. sulfide)/TFE (tetrafluoroet.)/ACM (polyacryl) Lisainfo: "Tootja: SRL
A1 (8X1), 05.10-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A1 (8X1), 05.10-
(kvaliteediklass: PJ)"

• Number of Teeth: 28
• Operating Mode: Mechanical
• Housing Type: without housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of blades/vanes: 6
• Belt Pulley Ø [mm]: 49.5
• Number of Gaskets/Seals/Seal Rings: 2
• Manufacturer: OPTIMAL ZAWIESZENIE

• Voltage [V]: 12
• Operating Mode: Electric
• for OE number: 5Q0965567
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• General Information: solenoid valve
• Manufacturer: VIKA

• for OE number: 2Q0 965 567
• Manufacturer: KAMOKA

• Guarantee: 3 years guarantee
• Weight [kg]: 0.32
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN
• Additional information: SKV22SKV068
• Lisainfo: SKV22SKV068

• Engine Code: DKRF
• Operating Mode: Mechanical
• for OE number: 04E121600CS
• Manufacturer: SASIC

• Operating Mode: Electric
• Voltage [V]: 12
• Pressure [bar]: 0.2
• Flow rate [l/h]: 500
• Supplementary Article/Supplementary Info: without holder
• Name: Veepump, ajami aku
• Manufacturer: MAX

• Operating Mode: Electric
• Voltage [V]: 12
• Pressure [bar]: 0.2
• Flow rate [l/h]: 500
• Supplementary Article/Supplementary Info: with holder
• Name: Lisaveepump (jahutusvee ringlusssteem)
• Manufacturer: MAX

• Fabrication Number: CPZ-VW-019
• Operating Mode: Electric
• Manufacturer: NTY
• Name: NTY CPZ-VW-019

• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: without housing
• SVHC: No SVHC present!
• Manufacturer: INA
• Name: LU 538074610

• Lisainfo: Water Pump
• Additional information: Water Pump

• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: without housing
• Water Pump Type: for timing belt drive
• Number of Teeth: 28
• Quality: Sealed with SiC/SiC
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: VEEPUMP
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Voltage [V]: 12
• Operating Mode: Electric
• for OE number: 5Q0965561C
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Operating Mode: Electric
• Supplementary Article/Info 2: with fastening material
• Manufacturer: NRF

• Brake System: Webasto
• Vehicle Equipment: for vehicles with parking heater
• Operating Mode: Electric
• Manufacturer: GRAF POMPY WODY

• Vehicle configuration line / variant: TB
• Weight [kg]: 1.1
• Manufacturer: DAYCO POMPY WODY

• Weight [kg]: 1.154
• Packaging length [cm]: 20
• Packaging width [cm]: 15
• Packaging height [cm]: 22.5
• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: without housing
• Manufacturer: CONTITECH

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Number of Teeth: 28
• Number of blades/vanes: 6
• Observe service information:
• Name: Veepump
• Manufacturer: MAX

• Operating Mode: Mechanical
• Lisainfo: Water Pump
• Additional information: Water Pump

• Housing Type: without housing
• Weight [kg]: 0.94
• Manufacturer: DOLZ
• Name: DO A234

• Driven Units: Water Pump
• Packaging length [cm]: 23.5
• Packaging width [cm]: 19.5
• Packaging height [cm]: 20.9
• Number of Teeth: 81
• Weight [kg]: 1.414
• Width [mm]: 10
• Housing Type: without housing
• Name: Veepump hammasrihmakomplekt
• Manufacturer: CON

• Voltage [V]: 12
• Number of connectors: 3
• Material: Plastic
• Weight [kg]: 0.25
• for OE number: 2Q0 965 567 A SK
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Water Pump
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Engine Code: DKRF
• Construction Year to: 10.2020
• Operating Mode: Electric
• Voltage [V]: 12
• Pressure [bar]: 0.2
• Flow rate [l/h]: 500
• Supplementary Article/Supplementary Info: without holder
• Name: Lisaveepump
• Manufacturer: BOS

• Water Pump Type: for tooth belt accessory drive
• Belt Width [mm]: 10
• for OE number: 04E 121 605 E
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 87
• Name: VEEPUMP
• Manufacturer: SKF

• Water pump impeller material: Plastic
• Housing Type: with housing
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with belt, Thermostat fitted in water pump
• Number of Teeth: 28
• Technical Information: SKF Aquamax
• Name: SK VKPA81341
• Manufacturer: SKF

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: without coolant regulator
• Number of blades/vanes: 6
• Manufacturer: HEPU

• Water Pump Type: for tooth belt accessory drive
• Housing Type: without housing
• Number of Teeth 1: 81
• Width 1 [mm]: 10
• Supplementary Article/Supplementary Info: with gasket/seal
• Observe service information:
• SVHC: No SVHC present!
• Manufacturer: INA

• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 5G0 965 567
• Supplementary Article/Supplementary Info: with holder
• Flow rate [l/h]: 500
• Manufacturer: HEPU

• New Part:
• Manufacturer: DOLZ
• Name: DO A262
• Additional information: A-262 DOLZ
• Lisainfo: A-262 DOLZ

• Engine Code: DKRF
• Construction Year to: 10.2020
• Operating Mode: Electric
• Voltage [V]: 12
• Pressure [bar]: 0.2
• Flow rate [l/h]: 500
• Supplementary Article/Supplementary Info: with holder
• Name: Lisaveepump
• Manufacturer: BOS

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -KTBWP
• Number of Teeth: 163
• Width [mm]: 20
• Length [mm]: 1,141
• Number of Teeth 1: 81
• Width 1 [mm]: 10
• Length 1 [mm]: 405
• Number of belts: 2
• 2 Belts:
• Pulleys contained: 2
• Weight [kg]: 1.9
• Name: DA KTBWP8191
• Manufacturer: DAYCO

• for OE number: 5Q0 965 567
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with holder
• SVHC: No SVHC present!
• Manufacturer: INA-POMPY WODY

• Number of track rollers: 2
• Number of belts: 2
• Width 1 [mm]: 20
• Number of Teeth: 163
• Manufacturer: SNR
• Name: SN KDP457.751

• Housing Type: with housing
• Weight [kg]: 1.53
• Manufacturer: DOLZ
• Name: DO A235

• Water pump impeller material: Plastic
• Seal Material: Rubber
• Material: Aluminium
• Number of Teeth: 28
• Supplementary Article/Info 2: with thermostat
• Number of blades/vanes: 6
• Weight [kg]: 1.53
• for OE number: 04E 121 600 CS
• Housing Type: with housing
• Observe service information:
• Name: Veepump
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Pin Shape: Flat
• Plug Type: Male
• Supplementary Article/Info 2: with clip
• Operating Mode: Electric
• Manufacturer: GATES

• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: with housing
• Water Pump Type: for timing belt drive
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Name: Veepump, mootori jahutus
• Manufacturer: MEY

General Information: MEYLE provides a 100,000-mile guarantee for all MEYLE water pumps and a 4-year warranty for MEYLE-HD water pumps. The 100,00 mile warranty requires the cooling system to be flushed before installation.

• Weight [kg]: 1.92
• Packaging length [cm]: 20
• Packaging width [cm]: 15
• Packaging height [cm]: 22.5
• Supplementary Article/Supplementary Info: with gasket/seal
• Housing Type: Metal Housing
• Name: Veepump, mootori jahutus
• Manufacturer: CON

• General Information: water pump
• Manufacturer: BORSEHUNG

• Number of track rollers: 2
• Number of belts: 2
• Number of Teeth: 163
• Width 1 [mm]: 20
• Number of Teeth 2: 87
• Width 2 [mm]: 10
• Manufacturer: SNR /NTN-SNR/
• Name: SN KDP457.753

• Number of bolts/screws: 1
• Water pump impeller material: Metal
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth 1: 163
• Number of Teeth 2: 87
• Width 1 [mm]: 20.1
• Width 2 [mm]: 10
• Name: SK VKMC01280
• Manufacturer: SKF

• Driven Units: Camshaft, Water Pump
• Article number of the recommended special tool: GAT5145A, GAT4844, GAT5169
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES

• Housing Type: with housing
• Number of Teeth 1: 163
• Width 1 [mm]: 20
• Supplementary Article/Info 2: with lid
• Water Pump Type: for timing belt drive
• Manufacturer: METELLI ROZRZAD

• General Information: water pump; with toothed belt;1.0;1.2;1.6
• Manufacturer: BORSEHUNG

• Supplementary Article/Info 2: without thermostat, with bolts/screws
• Number of belts: 2
• Number of Teeth 1: 81
• Width 1 [mm]: 10
• Number of Teeth 2: 163
• Width 2 [mm]: 20
• Pulleys contained: 2
• Manufacturer: HEPU ZESTAWY ROZRZĄDU

• Driven Units: Camshaft, Water Pump
• Packaging length [cm]: 23.5
• Packaging width [cm]: 19.5
• Packaging height [cm]: 20.9
• Weight [kg]: 2.498
• Width 1 [mm]: 20
• Width 2 [mm]: 10
• 2 Belts:
• Number of Teeth 2: 81
• Number of Teeth 1: 163
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: Veepump hammasrihmakomplekt
• Manufacturer: CON

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gaskets/seals
• Housing Type: Synthetic Material Housing
• Manufacturer: HEPU

Supplementary Article/Info 2: with thermal management module, with bore for sensor

• Supplementary Article/Info 2: Thermostat fitted in water pump, with bolts/screws
• Number of belts: 2
• Number of Teeth 1: 81
• Width 1 [mm]: 10
• Number of Teeth 2: 163
• Width 2 [mm]: 20
• Pulleys contained: 2
• Manufacturer: HEPU ZESTAWY ROZRZĄDU