Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)

- Fitting Position: Front Axle
- for brake disc diameter [mm]: 380
- for PR number: 1LW
- Length [mm]: 315
- Brake Type: Disc Brake
- Manufacturer: JP GROUP

-
Fitting Position: Rear Axle Right,
Front Axle Right - Block Separation:
- Sensor Type: Active sensor
- Length [mm]: 37
- Socket colour: black

- General Information: Exterior temperature sensor
- Manufacturer: VIKA

-
Fitting Position: Front,
Rear -
Fabrication Number: EZC-
VW- 304 - Manufacturer: NTY
-
Name: NTY EZC-
VW- 304
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

-
Fitting Position: Front Axle Left,
Rear Axle Left -
Fabrication Number: HCA-
AU- 015 -
paired article number: HCA-
AU- 016 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- Fitting Position: Front
- Colour: black
- Chemical Properties: Paintable
- Sensor Type: Ultrasonic Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- General Information: Fuel temperature sensor
- Manufacturer: VIKA

- for OE number: 04L919824
- for manufacturer number: 4080079
- Manufacturer: KAMOKA

- Construction Year to: 08.2018
- Number of pins: 2
-
Name: Andur,
ktusetemperatuur - Manufacturer: MAX

-
Fitting Position: Front Axle Right,
Rear Axle Right -
Fabrication Number: HCA-
AU- 016 -
paired article number: HCA-
AU- 015 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

- General Information: Exterior temperature sensor
- Manufacturer: BORSEHUNG

- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: oval
- Number of pins: 2
- Spanner Size: 19
- Thread Size: M12x1.5
- for OE number: 04L919824
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF

- Fitting Position: Rear Axle Right
- Cable Length [mm]: 70
- Number of pins: 2
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Construction Year to: 08.2019
- Fitting Position: Front Axle
- Guarantee: 3 years guarantee
- Weight [kg]: 0.02
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 06SKV353

-
Fitting Position: inner,
Rear, Front, both sides, outer, Centre -
Fabrication Number: EPDC-
AU- 008 - Manufacturer: NTY
-
Name: NTY EPDC-
AU- 008
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

-
Fitting Position: Rear Axle Right,
Front Axle Left - Quantity: 1
- Sensor Type: Active sensor
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX

- Cable Length [mm]: 70
- Fitting Position: Right
- General Information: Wheel speed sensor; front right
- Manufacturer: VIKA

-
Fitting Position: Front Axle Left,
Rear Axle Left - Cable Length [mm]: 70
- Number of pins: 2
- Sensor Type: Hall Sensor
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.03
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Name: SW 30 92 9318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Cable Length [mm]: 70
- Fitting Position: Left
- General Information: Wheel speed sensor; front left
- Manufacturer: VIKA

- Engine Code: DKAB
-
Thread Size: M12x1,
5 - Spanner Size: 17
-
Name: ANDUR,
KTUSETEMPERATUUR - Manufacturer: EPS

- Engine Code: DKAB
-
Thread Size: M12x1,
5 - Spanner Size: 17
- Manufacturer: FACET

- Length [mm]: 24
- Required quantity: 1
- Sensor Type: Hall Sensor
- Number of pins: 3
-
Fabrication Number: ECP-
AU- 029 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

-
Fitting Position: Front Axle Right,
Rear Axle Right - Number of pins: 2
- Supplementary Article/Info 2: without cable
- Sensor Type: Active sensor
- Fitting Depth [mm]: 37
- Manufacturer: AUTOFREN SEINSA
- Name: SE DS0009
- Additional information: DS0009 AUT
- Lisainfo: DS0009 AUT

- Quantity: 1
-
Fitting Position: Front Axle Right,
Rear Axle Left - Sensor Type: Active sensor
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MAX

- Thread Size: M 12x1.5
- Number of pins: 2
- Housing Colour: brown
- Manufacturer: FAE

-
Fabrication Number: ESS-
AU- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.

-
Fitting Position: Front Axle,
Rear Axle, Left, Right - Manufacturer Restriction: VAG
- Cable Length [mm]: 500
- Number of pins: 2
- Cable Cross Section [mm²]: 0.5
- Socket Width [mm]: 1.5
-
Contact surface: Tin-
plated - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- Plug housing design: Plug sleeve housing
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
piki- / klgkiirenduse andur - Manufacturer: HBE
Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with heat shrink tubing

- Quantity: 4
- Number of pins: 3
- Fitting Depth [mm]: 24
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MAX

- Required quantity: 1
-
Fitting Position: Rear Axle Right,
Front Axle Right - Supplementary Article/Info 2: without cable
- Colour: black
-
Name: CZUJNIK ABS VW P. AUDI Q5/
PHAETON 3, 0T LE - Manufacturer: BRM

- Required quantity: 1
-
Fitting Position: Rear Axle Left,
Front Axle Left - Supplementary Article/Info 2: without cable
- Colour: black
-
Name: CZUJNIK ABS VW P. AUDI Q5/
PHAETON 3, 0T PR - Manufacturer: BRM

-
Fitting Position: Front Axle Left,
Rear Axle Left - Sensor Type: Active sensor
- Number of pins: 2
- Supplementary Article/Info 2: without cable
- Fitting Depth [mm]: 37
- Manufacturer: AUTOFREN SEINSA
- Name: SE DS0010

- Required quantity: 4
- Sensor Type: Hall Sensor
- Mounting Type: Screw Connection
- Shape: oval
- Number of pins: 3
- Fitting Depth [mm]: 24
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF

- Construction Year from: 09.2018
- Fitting Position: Front
- Colour: black
-
Supplementary Article/Supplementary Info: with gasket/
seal -
Name: Sensor,
parkimisabi - Manufacturer: MAG

- Construction Year to: 08.2018
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.01
- for OE number: 059 919 523 A
- Supplementary Article/Info 2: with seal ring
-
Name: Andur,
Jahutusvedeliku temp. - Manufacturer: FEB
- Additional information: FE106318
- Lisainfo: FE106318
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Number of pins: 2
- Socket Width [mm]: 1.5
- Plug Type: Female
- Number of circuits: 2
-
Material: CuSn
(copper- tin) - Cable Length [mm]: 500
- Cable cross-section from [mm²]: 0.75
- Cable cross-section to [mm²]: 0.75
- Cable insulation material: Silicone
- Supplementary Article/Supplementary Info: with shrink squeeze connector
- Manufacturer: METZGER
Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right

- Quantity: 4
- Number of pins: 3
- Manufacturer: DELPHI
- Name: DE SS11473

- Construction Year to: 08.2018
- Number of connectors: 2
- Colour: black
- Weight [kg]: 0.01
- for OE number: 059 919 523 A
- Supplementary Article/Info 2: with seal ring
- Name: SW 30 10 6318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Number Installed: 4
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with seal ring
- Number of pins: 3
-
Name: Andur,
Nukkvollipositsioon - Manufacturer: MEY

- General Information: Camshaft position sensor
- Manufacturer: VIKA

-
Fitting Position: Front Axle,
Front Axle Right -
paired article number: GH-
704715V -
Manufacturer: AUTO-
GH

- Fitting Position: Front Axle Right
- Overall Length [mm]: 60
- Length [mm]: 37
- Sensor Type: Active sensor
- Socket colour: black
- paired article number: 30563
- Weight [kg]: 0.05
- Manufacturer: ABS

- Fitting Position: Front Axle Left
- Overall Length [mm]: 60
- Length [mm]: 37
- Sensor Type: Active sensor
- Socket colour: black
- paired article number: 30574
- Weight [kg]: 0.05
- Manufacturer: ABS

- Required quantity: 4
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: with seal ring
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PU009168401
Brief Information: *** HELLA Electronics OE competence for over 60 years.

- Sensor Type: Hall Sensor
- Manufacturer: FAE ELEKTRYKA

- Fitting Position: Rear Axle
- General Information: Parking distance sensor; rear
- Manufacturer: VIKA

- Engine Code: DKAB
- Required quantity: 4
- Name: EP 1.953.793
- Manufacturer: EPS

- Required quantity: 1
- Total Length [mm]: 67
- Voltage [V]: 12
- Number of pins: 2
- Fitting Position: Front Axle Right
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.

- Engine Code: DKAB
-
Fitting Position: Front Axle Right,
Rear Axle Right - Required quantity: 1
- Block Separation:
- Sensor Length [mm]: 37
- Name: EP 1.960.014
- Manufacturer: EPS

-
Fitting Position: Front Axle Left,
Rear Axle Left - Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Number of pins: 2
- paired article number: 114 800 0014
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY

-
Fitting Position: Front Axle Right,
Rear Axle Right - Sensor Type: Active sensor
- Supplementary Article/Info 2: without cable
- Number of pins: 2
- paired article number: 114 800 0013
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: MEY

- Engine Code: DKAB
-
Fitting Position: Front Axle Right,
Rear Axle Right - Required quantity: 1
- Block Separation:
- Sensor Length [mm]: 37
- Manufacturer: FACET

- Guarantee: 5 years guarantee
- Number of pins: 3
- Sensor Type: Hall Sensor
-
General Information: Sold in Hueco brand:
printing and packaging - Manufacturer: HUCO

- Fitting Position: Front Axle Right
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: DLP

- Required quantity: 4
- Number of pins: 3
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Housing Colour: black
- Manufacturer: BREMI

- Engine Code: DKAB
-
Fitting Position: Front Axle Left,
Rear Axle Left - Required quantity: 1
- Block Separation:
- Sensor Length [mm]: 37
- Manufacturer: FACET

- Construction Year to: 06.2018
-
Fitting Position: both sides,
Front - Required quantity: 4
-
Supplementary Article/Supplementary Info: with gaskets/
seals - Diameter [mm]: 15.35
- Chemical Properties: Paintable
-
Name: Sensor,
parkimisabi - Manufacturer: TRI

- Fitting Position: Front Axle Right
- Required quantity: 1
- Fitting Depth [mm]: 37.3
- Number of pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI

- Fitting Position: Front Axle Left
- Quantity: 1
- Sensor Type: Active sensor
- Number of occupied pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: DLP

- Manufacturer Restriction: VAG
- Plug Type ID: Code A
- Cable Length [mm]: 175
- Number of pins: 3
- Cable Cross Section [mm²]: 0.75
-
Contact surface: Silver-
plated - Cable insulation material: Silicone
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- SVHC: No SVHC present!
-
Name: Kaabli remondikomplekt,
heitgaasi rohuandur - Manufacturer: HBE

- Fitting Position: Front Axle Right
- Length [mm]: 67
- Sensor Type: Active sensor
- Manufacturer: TRW
- Additional information: GBS127
- Lisainfo: GBS127
SVHC: No information available, please contact the manufacturer!

- Fitting Position: Front Axle Left
- Required quantity: 1
- Fitting Depth [mm]: 37.3
- Number of pins: 2
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: TRI

- Fitting Position: Rear Axle Left
- Length [mm]: 67
- Sensor Type: Active sensor
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!

- Number of pins: 3
- Manufacturer: JPN

-
Fitting Position: for cylinder 4,
for cylinder 5 - Quantity: 1
- Cable Length [mm]: 385
- Number of pins: 3
- Name: DETONATSIOONIANDUR
- Manufacturer: DLP

- Required quantity: 1
-
Fitting Position: for cylinder 9,
for cylinder 10 - Cable Length [mm]: 400
- Number of pins: 3
- Name: DE AS10233
- Manufacturer: DELPHI

- Fitting Position: Front
- General Information: Parking distance sensor; front; primed
- Manufacturer: BORSEHUNG

-
Fitting Position: Rear Axle,
Front Axle -
Manufacturer: SNR /
NTN- SNR/

-
Fitting Position: outer,
inner, both sides, Front, Rear - Construction Year from: 09.2018
-
Supplementary Article/Supplementary Info: with gasket/
seal - Number of pins: 3
- Chemical Properties: Paintable
- Manufacturer: FAE ELEKTRYKA

- Supplementary Article/Info 2: High Pressure Side
- Fuel Mixture Formation: Direct Injection
-
Name: CZUJNIK CIN. POWIETRZA AUDI A1 1.4TFSI 14-
- Manufacturer: MAX

- Fitting Position: Rear
- General Information: Parking distance sensor; rear; primer
- Manufacturer: BORSEHUNG

- Construction Year to: 04.2024
- for PR number: 7K3
- can be programmed:
- Colour: silver
- Frequency Range [MHz]: 433
- Material: Steel
- Manufacturer: BOSCH UK£ADY HAMULCOWE
- Name: BS F026C00466

- Construction Year to: 04.2024
- for PR number: 7K3
- can be programmed:
- Colour: black
- Frequency Range [MHz]: 433
- Material: Rubber
- Manufacturer: BOSCH
- Name: BS F026C00469

- Construction Year to: 04.2024
- for PR number: 7K3
- can be programmed:
- Colour: Titanium
- Frequency Range [MHz]: 433
- Material: Steel
- Manufacturer: BOSCH
- Name: BS F026C00467
- Lisainfo: F026C00467 BOSCH
- Additional information: F026C00467 BOSCH

- Construction Year to: 04.2024
- for PR number: 7K3
- can be programmed:
- Colour: black
- Frequency Range [MHz]: 433
- Material: Steel
- Manufacturer: BOSCH

-
Fitting Position: Rear Axle,
Front Axle -
Manufacturer: SNR /
NTN- SNR/

- Construction Year to: 04.2024
-
Fitting Position: Front Axle Left,
Rear Axle Left - Block Separation:
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Overall Length [mm]: 70
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 150
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: BOS

- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.03
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY

- Construction Year to: 04.2018
- Pressure to [bar]: 280
- Number of pins: 3
- Manufacturer: FAE ELEKTRYKA

- Construction Year to: 04.2024
- Manufacturer: BOSCH

- Frequency Range [MHz]: 433
-
Valve colour: black,
silver - Tightening Torque [Nm]: 8
- Mounting Type: Bolted
-
Supplementary Article/Info 2: with groove,
with valves - Permissible maximum speed [km/h]: 250
- Housing Colour: black
-
Name: Rattaandur,
rehvirohu kontrollssteem - Manufacturer: SKF

- General Information: Secondary air pump pressure sensor
- Manufacturer: VIKA

- General Information: Fuel pressure sensor
- Manufacturer: VIKA

- Construction Year to: 04.2024
-
Fitting Position: Front Axle Right,
Rear Axle Right - Block Separation:
- Sensor Type: Hall Sensor
- Supplementary Article/Info 2: without cable
- Overall Length [mm]: 70
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 150
-
Name: ANDUR,
RATTAPRETE ARV - Manufacturer: BOS

- General Information: Tyre pressure sensor
- Manufacturer: VIKA

- Engine Code: DKAB
-
Fitting Position: for cylinder 4,
for cylinder 5 - Required quantity: 1
- Housing Colour: green
- Length [mm]: 500
- Manufacturer: FACET

- General Information: Fuel pressure sensor
- Manufacturer: VIKA

- Required quantity: 1
- Voltage [V]: 12
- Total Length [mm]: 67
- Number of pins: 2
- Fitting Position: Front Axle Left
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
Brief Information: *** HELLA Electronics OE competence for over 60 years.

- External Thread Size: M10 x 1
- Number of connectors: 3
- Supplementary Article/Info 2: Low Pressure Side
- Weight [kg]: 0.02
- for OE number: 06E 906 051 K
-
Name: Andur,
ktuserohk - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- General Information: Tyre pressure sensor
- Manufacturer: VIKA

- Fitting Position: Front Axle Right
- Supplementary Article/Info 2: without cable
- Length [mm]: 67
- MAPP code available:
- Manufacturer: ATE

-
Fitting Position: engine sided,
for cylinder 4, for cylinder 5 - Block Separation:
- Number of connectors: 3
- Colour: green
- Cable Length [mm]: 465
- Weight [kg]: 0.062
- Name: DETONATSIOONIANDUR
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Construction Year to: 06.2018
- Required quantity: 4
-
Fitting Position: both sides,
Front - Number of pins: 3
- Chemical Properties: Paintable
- Mounting Type: Plugged
- Socket colour: black
- Shape: angled
- Supplementary Article/Supplementary Info: with fastening ring
- Shaft form: round
- Assy./disassy. by qualified personnel required!:
-
Name: Sensor,
parkimisabi - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years.

- Number of connectors: 3
- Weight [kg]: 0.041
- for OE number: 06J 906 051 F
-
Name: Andur,
ktuserohk - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: NRF KLIMATYZACJA

- General Information: Fuel pressure sensor
- Manufacturer: BORSEHUNG

Manufacturer: NRF KLIMATYZACJA

- Cable Length [mm]: 570
- Number of pins: 3
- Housing Colour: grey
- Manufacturer: FAE

- for PR number: 7K3
- Unprogrammed:
-
Supplementary Article/Info 2: Control Unit/
Software must be trained/ updated - Frequency Range [MHz]: 433
- Tightening Torque [Nm]: 4
- Valve stem material: Solid rubber
- Assy./disassy. by qualified personnel required!:
-
Name: Rattaandur,
rehvirohu kontrollssteem - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

- Weight [kg]: 0.056
-
Test Mark: CE,
FCC, IC -
Vehicle Equipment: for vehicles with tyre-
pressure monitoring system - Frequency Range [MHz]: 433
- Housing Colour: black
- Mounting Type: Bolted
- Manufacturer: HUF
Technical Information: After installing a new sensor, the TPM system must be reinit ialized/calibrated. The procedure refer to the owner's manua l of the car manufacturer.

- for PR number: 7K3
- Unprogrammed:
-
Supplementary Article/Info 2: Control Unit/
Software must be trained/ updated - Frequency Range [MHz]: 433
- Tightening Torque [Nm]: 4
- Colour: black
- Assy./disassy. by qualified personnel required!:
-
Name: Rattaandur,
rehvirohu kontrollssteem - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

- for PR number: 7K3
- Unprogrammed:
-
Supplementary Article/Info 2: Control Unit/
Software must be trained/ updated - Frequency Range [MHz]: 433
- Tightening Torque [Nm]: 4
- Valve stem material: Aluminium
- Assy./disassy. by qualified personnel required!:
-
Name: Rattaandur,
rehvirohu kontrollssteem - Manufacturer: HEL
Brief Information: *** HELLA Electronics OE competence for over 60 years. Technical Information: "Universal tyre pressure sensors from HELLA. A wide range of vehicles can be covered with just one type o f sensor. Now available in different looks and colours. The sensor must be programmed and, if necessary, taught-in."

- Fitting Position: Front Axle Left
- Supplementary Article/Info 2: without cable
- Length [mm]: 67
- MAPP code available:
- Manufacturer: ATE

- General Information: Fuel pressure sensor
- Manufacturer: BORSEHUNG

- Number of connectors: 3
- Weight [kg]: 0.01
- Supplementary Article/Info 2: with seal ring
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Number of pins: 3
- Connector Shape: D Shape
- Socket colour: black
- Mounting Type: Bolted
- Supplementary Article/Info 2: Low Pressure Side
- for OE number: 06E906051K
- Manufacturer: MEAT&DORIA

- General Information: Fuel pressure sensor
- Manufacturer: BORSEHUNG

- Engine Code: DKAB
-
Fitting Position: for cylinder 1-
5, before catalytic converter - Required quantity: 1
- Oxygen Sensor: Regulating Sensor
- Voltage [V]: 12
- Cable Length [mm]: 477
- Number of pins: 5
- Guarantee: 3 years guarantee
- Weight [kg]: 0.14
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY

- Required quantity: 2
- Guarantee: 3 years guarantee
- New Part:
- Used part return not required:
- Weight [kg]: 0.27
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY

-
Fitting Position: Left,
before catalytic converter - Oxygen Sensor: Regulating Sensor
- Voltage [V]: 12
- Cable Length [mm]: 400
- Number of pins: 5
- Guarantee: 3 years guarantee
- Weight [kg]: 0.14
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY

-
Fitting Position: Left,
before catalytic converter - Oxygen Sensor: Regulating Sensor
- Voltage [V]: 12
- Cable Length [mm]: 380
- Number of pins: 5
- Guarantee: 3 years guarantee
- Weight [kg]: 0.13
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY

-
Required quantity: 2,
4 -
Fitting Position: outer,
inner, both sides, Front, Rear - Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 31
- Width [mm]: 22
- Height [mm]: 35.9
- Number of pins: 3
- Diameter [mm]: 15.5
-
Name: SENSOR,
PARKIMISABI - Manufacturer: VAL

- Construction Year to: 04.2024
- Supplementary Article/Info 2: High Pressure Side
- Fuel Mixture Formation: Direct Injection
-
Name: ANDUR,
KTUSEROHK - Manufacturer: BOS

- Number of pins: 3
- Connector Shape: D Shape
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

- Frequency Range [MHz]: 433
- for PR number: 7K3
- Programmed:
- Tightening Torque [Nm]: 4
- Assy./disassy. by qualified personnel required!:
-
Name: Rattaandur,
rehvirohu kontrollssteem - Manufacturer: HEL
Brief Information: "Fully programmed and ready for installation! No need for complex sensor programming. Significantly saves time in workshops! Calibration by the corresponding vehicle manufacturers is al l it takes.

-
Required quantity: 2,
4 -
Fitting Position: outer,
inner, both sides, Front, Rear - Sensor Type: Ultrasonic Sensor
- Chemical Properties: Paintable
- Length [mm]: 41
- Width [mm]: 22
- Height [mm]: 26.3
- Number of pins: 3
- Diameter [mm]: 15.5
-
Name: SENSOR,
PARKIMISABI - Manufacturer: VAL

- Voltage [V]: 12
- Vehicle Equipment: for vehicles with air conditioning
- Colour: black
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

- Colour: silver
- Tightening Torque [Nm]: 4
- Mounting Type: Bolted
- Valve type: Air Valve
-
Vehicle Equipment: for vehicles with tyre-
pressure monitoring system -
Supplementary Article/Info 2: with screw,
with valves - Frequency Range [MHz]: 433
- Full Set:
-
Recommended change interval [km]: 160,
000 - Recommended change interval [years]: 5
- Valve stem material: Aluminium
- Observe the vehicle manufacturer specifications:
- for OE number: 5Q0907275F
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Number of pins: 3
- Manufacturer: METZGER
Fitting Position: between the secondary air pump and secondary air valve

- Number of pins: 3
- Guarantee: 3 years guarantee
- Weight [kg]: 0.13
- Always compare old and new part (in particular OE No.):
- Name: CE 17SKV747
- Manufacturer: ESEN SKV

- Supplementary Article/Info 2: Rubber pedal pad
- Number of mounting bores: 1
- Number of pins: 6
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Assy./disassy. by qualified personnel required!:
-
Name: ANDUR,
SOIDUPEDAALIASEND - Manufacturer: HEL
Transmission Type: 7-Speed Automatic Transmission, Automatic Transmission Brief Information: *** HELLA Electronics OE competence for over 60 years.

- Engine Code: DKAB
-
Fitting Position: for cylinder 6-
10, before catalytic converter - Required quantity: 1
- Cable Length [mm]: 400
- Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.394
- Manufacturer: EPS
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

- Engine Code: DKAB
-
Fitting Position: for cylinder 1-
5, before catalytic converter - Required quantity: 1
- Cable Length [mm]: 500
- Conductor Number: 5
- Number of circuits: 5
- Name: EP 1.998.404
- Manufacturer: EPS
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

- Engine Code: DKAB
-
Fitting Position: for cylinder 6-
10, before catalytic converter - Required quantity: 1
- Cable Length [mm]: 400
- Conductor Number: 5
- Number of circuits: 5
- Manufacturer: FACET
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

- Fitting Position: Left
-
Oxygen Sensor: Regulating Sensor,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 5
- Cable Length [mm]: 406
- Weight [kg]: 0.097
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Engine Code: DKAB
-
Fitting Position: for cylinder 1-
5, before catalytic converter - Required quantity: 1
- Cable Length [mm]: 500
- Conductor Number: 5
- Number of circuits: 5
- Manufacturer: FACET
Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased

- Colour: silver
- Tightening Torque [Nm]: 4
- Mounting Type: Bolted
- Valve type: Air Valve
-
Vehicle Equipment: for vehicles with tyre-
pressure monitoring system -
Supplementary Article/Info 2: with valves,
with screw - Frequency Range [MHz]: 433
- Full Set:
-
Recommended change interval [km]: 160,
000 - Recommended change interval [years]: 5
- Valve stem material: Aluminium
- Supplementary Article/Supplementary Info: with mounting tool
- Observe the vehicle manufacturer specifications:
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

- Fitting Position: Left
-
Oxygen Sensor: Regulating Sensor,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 5
- Cable Length [mm]: 406
- Weight [kg]: 0.097
- Name: SW 33 10 4087
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

- Engine Code: DKAB
- Operating Mode: Electric
- Voltage [V]: 12
- for OE number: 420 133 471
- Name: OHUMASSIMOOTJA
- Manufacturer: PIE

- for PR number: VF2
- Supplementary Article/Info 2: Aluminium Pedal Cover
- Number of mounting bores: 1
- Number of pins: 6
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Material: Aluminium
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PV011039721
Transmission Type: 7-Speed Automatic Transmission, Automatic Transmission Brief Information: *** HELLA Electronics OE competence for over 60 years.

- Construction Year from: 09.2018
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 500
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
- Name: VA 368417
Oxygen Sensor: Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated

- Construction Year from: 09.2018
- Fitting Position: before catalytic converter
- Number of pins: 6
- Cable Length [mm]: 400
-
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
Oxygen Sensor: Planar Sensor, Broadband Oxygen Sensor, Thread pre-greased, Heated