• Number of pins: 4
• Colour Coding: green
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge 4 pins
• Additional information: Sender for water temperature gauge 4 pins

• Operating voltage [V]: 12
• Switch point from [°C]: 84, 91
• Switch point to [°C]: 95, 102
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Thread Size: M22 x 1,5
• Number of pins: 3
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for fan 95-84/102-91 C
• Additional information: Thermo switch for fan 95-84/102-91 C

• Vehicle Identification Number (VIN) from: 8N-Y-015 001
• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Material: Rubber
• for OE number: 7198663
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 8N-Y-015 001
• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Manufacturer: VIEROL

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 1100619
• Manufacturer: KAMOKA

• for OE number: 191919369A
• Manufacturer: KAMOKA

• Quantity: 1
• Weight [kg]: 0.02
• Number of connectors: 4
• Outer Diameter [mm]: 20
• Plug Type ID: 4
• Colour: green
• Required quantity: 1
• General Information: Coolant temperature sensor; green; 4 pins
• Manufacturer: VIKA

• Fabrication Number: ECT-AU-004
• Number of pins: 4
• Colour Coding: green
• Connector Shape: oval
• Manufacturer: NTY
• Name: NTY ECT-AU-004

• Quantity per packing unit: 3
• Number of connectors: 2
• Manufacturer: 3RG

• Engine Code: BFV
• Number of connectors: 4
• Manufacturer: 3RG

• Number of pins: 2
• Connector Shape: rectangular
• Colour Coding: white
• Switch Point [°C]: 120
• Housing Diameter [mm]: 20
• for OE number: 191919369A
• Manufacturer: MEAT & DORIA

• Housing Colour: black
• Number of pins: 4
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10236-12B1

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 4
• for OE number: 059919501A
• Supplementary Article/Info 2: with mounting parts
• Manufacturer: NRF

• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 4
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0
• Manufacturer: NISSENS
• Name: NI 207009

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Colour Coding: green
• Connector Shape: oval
• Sensor Type: NTC Sensor
• Number of pins: 4
• for OE number: 059 919 501A, 1 124 770
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M 22 x 1,5
• Number of pins: 3
• Number of switch stages: 2
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Connector Shape: triangular
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 8N-Y-015 001
• Number of pins: 4
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with clamp holder
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Number of pins: 3
• Plug Type: Female
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Thread Size: 20 mm
• Number of pins: 4
• Manufacturer: VERNET

• Number of pins: 2
• Temperature range to [°C]: 120
• Manufacturer: ERA

• Vehicle Identification Number (VIN) from: ******8N*Y*015001
• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Manufacturer: FEBI BILSTEIN
• Additional information: FE32510
• Lisainfo: FE32510

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Spanner Size: 29
• Connector Shape: triangular
• Manufacturer: KAMOKA

• Engine Code: BFV
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: EP 1.830.258
• Manufacturer: EPS

• Engine Code: BFV
• Housing Colour: green
• Corresponds to the original part in colour: black
• Manufacturer: FACET

• for OE number: 078 919 501 C
• Manufacturer: TRUCKTEC

• Vehicle Identification Number (VIN) from: ******8N*Y*015001
• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: SW 30 93 2510
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Required quantity: 1
• Engine Code: BFV
• Vehicle Identification Number (VIN) from: 8N-Y-000 001
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Colour: green
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M22 x 1,5
• Spanner Size: 29 mm
• Number of pins: 3
• Manufacturer: KAMOKA

• Operating temperature from [°C]: 95, 102
• Operating temperature to [°C]: 84, 91
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Number of pins: 3
• Connector Shape: angular
• Socket colour: white
• Shut-off Point [°C]: 95, 97
• Switch Point [°C]: 90, 102
• Thread Size: M22x1,5 mm
• Spanner Size: 29 mm
• for OE number: 7215818
• Manufacturer: MEAT & DORIA

• Operating temperature from [°C]: 97, 102
• Operating temperature to [°C]: 87, 97
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Vehicle Identification Number (VIN) from: 8N-Y-000 001
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: without seal ring
• Colour: green
• Number of pins: 4
• Manufacturer: MEYLE

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 4
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: green, black
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107141
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Name: SW 30 92 9318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 20
• Weight [kg]: 0.02
• Number of connectors: 4
• Colour: black
• Required quantity: 1
• General Information: Coolant temperature sensor; 4 pin; black
• Manufacturer: BORSEHUNG

• Operating temperature from [°C]: 90, 97
• Operating temperature to [°C]: 79, 85
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Quantity: 1
• Outer Diameter [mm]: 20
• Weight [kg]: 0.02
• Number of connectors: 4
• Colour: green
• Required quantity: 1
• General Information: Coolant temperature sensor; 4 pin; green
• Manufacturer: BORSEHUNG

• Switch Point [°C]: 119
• Number of pins: 2
• Manufacturer: FAE

• Number of pins: 3
• Length [mm]: 29
• Height [mm]: 54.6
• Thread Size: M22x1,5
• Switch point from [°C]: 102
• Switch point to [°C]: 87
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for model code: For Cooling Fan
• Thread Size: M22*1.5
• Spanner Size: S29
• Number of pins: 3
• Connector Shape: triangular
• Manufacturer: DELPHI

• Number of pins: 3
• Switch point from [°C]: 95
• Switch point to [°C]: 90
• Manufacturer: FAE ELEKTRYKA

• Number of pins: 3
• Switch point from [°C]: 95
• Switch point to [°C]: 84
• Manufacturer: FAE

• for model code: For Cooling Fan
• Thread Size: M22*1.5
• Spanner Size: S29
• Number of pins: 3
• Connector Shape: rectangular
• Manufacturer: DELPHI
• Name: DE TS10285

• Mounting Type: Bolted
• Switch point from [°C]: 87
• Switch point to [°C]: 102
• Voltage [V]: 12
• Number of pins: 3
• Thread Size: M 22 x 1,5
• Switch: with double thermal switch
• Combi Switch Function: Dual Output, Normally Open Contact
• Spanner Size: 29
• Plug Type: Blade Terminal
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZT007800111
• Manufacturer: HELLA

• Mounting Type: Bolted
• Switch point from [°C]: 90
• Switch point to [°C]: 102
• Voltage [V]: 12
• Number of pins: 3
• Colour Coding: black
• Thread Size: M 22 x 1,5
• Switch: with double thermal switch
• Combi Switch Function: Dual Output, Normally Open Contact
• Spanner Size: 29
• Plug Type: Blade Terminal
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZT007837061
• Manufacturer: HELLA

• External Thread Size: M22 x 1,5
• Number of connectors: 3
• Temperature range from [°C]: 87, 97
• Temperature range to [°C]: 97, 102
• Connector Shape: triangular
• Weight [kg]: 0.06
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BFV
• Thread Size: M22x1,5
• Spanner Size: 29
• Manufacturer: EPS