• Engine Code: AJQ
• for OE number: 06A906262P, 06A906262BA
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 925
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 128
• Manufacturer: DENSO

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
BORA (1J2), 10.98-09
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
BORA (1J2), 10.98-09
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Overall Length [mm]: 1,000
• Number of pins: 4
• Oxygen Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Oxygen Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Front
• Engine Code: ATC, ARY
• Length [mm]: 940
• Number of connectors: 4
• Manufacturer: VERNET

• Oxygen Sensor: Diagnostic Probe
• Construction Year from: 09.2000
• Exhaust System: after catalytic converter
• Voltage [V]: 12
• Length [mm]: 1,175
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV038

• Fitting Position: Front, before catalytic converter
• Quantity: 1
• Engine Code: AJQ/ATC
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720
• Number of circuits: 4
• Weight [kg]: 0.156
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ARY
• Construction Year from: 09.2000
• Construction Year to: 05.2005
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 700
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Construction Year to: 07.2000
• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: AJQ
• Cable Length [mm]: 1,530
• Manufacturer: DELPHI
• Name: DE ES20166-12B1
• Quality class: PJ

Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Oxygen Sensor: Heated
• Number of pins: 4
• Total Length [mm]: 780
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Engine Code: ATC
• Cable Length [mm]: 700
• Manufacturer: DELPHI
• Name: DE ES20168-12B1
• Quality class: PJ

Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"

• Engine Code: ARY
• Construction Year from: 09.2000
• Construction Year to: 05.2005
• Oxygen Sensor: Diagnostic Probe, Unheated
• Number of pins: 4
• Cable Length [mm]: 630
• Quality: OE EQUIVALENT
• for OE number: 06A906262AS
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 1,750
• Number of circuits: 4
• Manufacturer: ERA

• Engine Code: AJQ
• Construction Year to: 08.2000
• Oxygen Sensor: Regulating Probe, Unheated
• Number of pins: 4
• Cable Length [mm]: 1,050
• Quality: OE EQUIVALENT
• for OE number: 058906265B
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Overall Length [mm]: 470
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Number of circuits: 4
• Resistor [Ohm]: 9
• Conductor Number: 4
• Length [mm]: 1,731
• Cable Length [mm]: 1,731
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM007

• Construction Year from: 10.1999
• Construction Year to: 06.2003
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 750
• Technical Information Number: Universal 77015
• Socket colour: black
• Manufacturer: FAE

• Construction Year from: 09.2000
• Construction Year to: 05.2005
• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 760
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV644
• Manufacturer: ESEN SKV

• Construction Year from: 09.2000
• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 980
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.17
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV641

• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Fitting Position: after catalytic converter
• Quantity: 1
• Engine Code: ATC
• Cable Length [mm]: 740
• Name: DE ES20348-12B1
• Manufacturer: DELPHI

• Construction Year from: 01.2001
• Construction Year to: 08.2002
• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Engine Code: AUQ
• Cable Length [mm]: 880
• Manufacturer: DELPHI
• Name: DE ES20343-12B1

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 5
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-002
• Manufacturer: NTY
• Name: NTY ESL-AU-002

• Engine Code: ATC
• Line insulation design: with silicone-coated woven-fibre insulation
• Supplementary Article/Info 2: without plug
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Fitting Position: after catalytic converter
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: after catalytic converter
• Cable Length [mm]: 954
• Oxygen Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20169-12B1

• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Overall Length [mm]: 330
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Engine Code: AJQ, ARY, AUQ
• Construction Year to: 08.2000
• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Construction Year from: 09.2000
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258986615

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 08.2002
• Engine Code: ARY
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AJQ
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: ARY
• Construction Year from: 09.2000
• Construction Year to: 05.2005
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Connector Shape: D Shape
• Weight [kg]: 0.138
• Length [mm]: 700
• for OE number: 030 906 262 L
• Thread Size: M18 x 1,5
• Cable Length [mm]: 700
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased Fitting Position: after catalytic converter, before catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 1
• Engine Code: AJQ, ATC, AUQ
• Block Separation:
• Cable Length [mm]: 1,200
• Name: DE ES20338-12B1
• Manufacturer: DELPHI
• Quality class: PJ

Oxygen Sensor: Regulating Probe, Diagnostic Probe, Planar probe, Heated Fitting Position: before catalytic converter, after catalytic converter Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"

• Construction Year from: 09.2000
• Construction Year to: 05.2005
• Engine Code: ARY
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 1,800
• Number of pins: 4
• Recommended change interval [km]: 160,000
• Weight [kg]: 0.166
• Oxygen Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ARY
• Construction Year from: 09.2000
• Construction Year to: 05.2005
• Number of pins: 5
• Overall Length [mm]: 1,510
• Oxygen Sensor: Regulating Probe
• Manufacturer: JP GROUP A/S
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Construction Year to: 08.2000
• Construction Year from: 06.2005
• Engine Code: AUQ
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Connector Shape: D Shape
• Weight [kg]: 0.142
• Length [mm]: 1,110
• for OE number: 06A 906 262 Q
• Thread Size: M18 x 1,5
• Cable Length [mm]: 1,020
• Number of circuits: 4
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Diagnostic Probe
• Construction Year from: 09.2000
• Length [mm]: 1,100
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Oxygen Sensor: Heated
• Length [mm]: 645
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 740
• Weight [kg]: 0.095
• Name: SW 30 93 4388
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ARY
• for OE number: 06A906262BB, 06C906265
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 800
• Number of pins: 4
• Weight [g]: 115
• Gross Weight [g]: 148
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Engine Code: ARY
• Construction Year from: 09.2000
• Construction Year to: 05.2005
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 760
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH
• Name: BS 0258006980

• Engine Code: ATC, AJQ, ARY, AUQ
• Oxygen Sensor: Regulating Probe, Diagnostic Probe, Heated
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,760
• Weight [kg]: 0.155
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AUQ
• for OE number: 06A906262Q
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,100
• Number of pins: 4
• Weight [g]: 117
• Gross Weight [g]: 150
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
SHARAN (7M8, 7M9, 7M
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SHARAN (7M8, 7M9, 7M
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Engine Code: ARY, AUQ
• Construction Year from: 09.2000
• Length [mm]: 1,500
• Number of pins: 6
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe, Planar probe
• Fitting Position: after catalytic converter
• Required quantity: 1
• Engine Code: ATC
• Cable Length [mm]: 750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066401

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: AJQ
• Construction Year to: 08.2000
• Oxygen Sensor: Regulating Probe
• Length [mm]: 920
• Number of pins: 4
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Construction Year to: 08.2000
• Construction Year from: 06.2005
• Engine Code: AUQ
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 1,100
• Number of pins: 4
• Number of circuits: 4
• Connector Shape: D Shape
• Socket colour: black
• Weight [kg]: 0.173
• for OE number: 06F 906 262 D
• Cable Length [mm]: 925
• Thread Size: M18 x 1,5
• Housing Colour: black
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Version: ZR-PLANAR
• Fitting Position: after catalytic converter
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe
• Length [mm]: 1,700
• Number of pins: 4
• Supplementary Article/Info 2: with mounting manual
• Manufacturer: FAE

• Fitting Position: before catalytic converter
• Rated Voltage [V]: 12
• Number of pins: 6
• Connector Shape: oval
• Cable Length [mm]: 1,510
• Overall Length [mm]: 1,538
• Spanner Size: 22
• Thread Size: M 18
• Thread Pitch [mm]: 1.5
• Supplementary Article/Supplementary Info: with cable tie
• Supplementary Article/Info 2: with plastic socket, with heat shield pipe
• Lubrication: with grease lubrication
• Full Set:
• Manufacturer: TOPRAN

Oxygen Sensor: Regulating Probe, Broadband oxygen sensor, Heated, Planar probe General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: before catalytic converter
• Required quantity: 1
• Engine Code: AJQ, ATC
• Oxygen Sensor: Regulating Probe
• Cable Length [mm]: 1,750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066391

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: AJQ,AUQ
• Oxygen Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 1,800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Heated
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 09.2000
• Construction Year to: 05.2005
• Engine Code: ARY
• Oxygen Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Manufacturer: VALEO

Fitting Position: before catalytic converter, after catalytic converter

• Number of circuits: 5
• Length [mm]: 1,510
• Conductor Number: 5
• Cable Length [mm]: 1,510
• Oxygen Sensor: Heated
• Manufacturer: MAGNETI MARELLI
• Name: MM OSM150

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Construction Year from: 08.2000
• Oxygen Sensor: Regulating Probe, Oxygen Sensor, Heated
• Engine Code: AJQ, ARY, AUQ
• Cable Length [mm]: 950
• Manufacturer: DELPHI

• Construction Year from: 09.2000
• Construction Year to: 05.2005
• Engine Code: ARY
• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 1,510
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.22
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV852

• Engine Code: ARY
• Oxygen Sensor: Diagnostic Probe
• Required quantity: 1
• Length [mm]: 465
• Number of connectors: 4

• Engine Code: ARY
• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 940
• Manufacturer: PIERBURG

• Engine Code: AUQ
• Vehicle Identification Number (VIN) from: 8N-1-010 001
• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 950
• Manufacturer: PIERBURG

• Construction Year from: 09.2000
• Construction Year to: 05.2005
• Engine Code: ARY
• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 1,470
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.22
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV860
• Manufacturer: ESEN SKV

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 930
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.18
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV857
• Manufacturer: ESEN SKV

• Engine Code: ARY
• Construction Year from: 09.2000
• Construction Year to: 05.2005
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 1,510
• Recommended change interval [km]: 250,000
• Manufacturer: BOSCH
• Name: BS 0258007351

• Engine Code: AUQ
• Construction Year from: 06.2005
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 760
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Oxygen Sensor: Heated
• Conductor Number: 5
• General Information: lambda probe; 5 wire
• Manufacturer: VIKA

• Oxygen Sensor: Regulating Probe, Broadband oxygen sensor
• Fitting Position: before catalytic converter
• Required quantity: 1
• Engine Code: AJQ, ATC
• Cable Length [mm]: 800
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Manufacturer: HELLA
• Name: HE 6PA009166791

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.15
• Always compare old and new part (in particular OE No.):
• Technical Information: Universal
• Manufacturer: SKV GERMANY
• Name: CE 09SKV915