• Fitting Position: Rear Axle, transmission sided
• Internal Toothing differential side, conn. to conn. shaft: 33
• Joint Type: CV Joint
• Drive Shaft: without ABS ring
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, inner, left, man.transm.
• Additional information: CV joint kit, front, inner, left, man.transm.

• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Wheel Side, Rear Axle Left, Rear Axle Right
• Length [mm]: 129.5
• Thread Size: M20X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Technical Information Number: Groove Type Inner
• Manufacturer: GSP

• Fitting Position: Wheel Side
• Joint Type: CV Joint
• for OE number: 1H0407311
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Diameter 1 [mm]: 23
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
• Additional information: 6680 KAMOKA
• Lisainfo: 6680 KAMOKA

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Length [mm]: 129
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Diameter 1 [mm]: 81
• Manufacturer: BGA

• Fitting Position: Rear Axle, Wheel Side
• Thread Size: M20 x 1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 81
• Manufacturer: JPN

• Fitting Position: Wheel Side, Rear Axle
• Thread Size: M20 x 1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 81
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fitting Position: transmission sided
• Joint Type: Flexible Joint Disc
• Length [mm]: 34
• Internal Toothing differential side, conn. to transmission: 33
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Version: Two
• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• Manufacturer: GSP

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: Rear Axle, Wheel Side
• Thread Size: M20x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 81
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP

• Length [mm]: 34
• Manufacturer: BGA

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Transmission Type: 6-Speed Manual Transmission
• Vehicle Identification Number (VIN) to: 8N_1_046000
• Length [mm]: 142.5
• Thread Size: M20X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Technical Information Number: Groove Type Inner
• Manufacturer: GSP

Fitting Position: Front Axle Left, Front Axle Right, Front Axle, Wheel Side

• Fitting Position: Rear Axle, Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 81
• Bellows Material: Polychloroprene (Neoprene)
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Fabrication Number: NPZ-VW-007
• Manufacturer: NTY

Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right, transmission sided Transmission Type: Automatic Transmission, 5-Speed Manual Transmission, Manual Transmission, 6-Speed Manual Transmission, 4-Speed Automatic Transmission

• Fitting Position: transmission sided, Rear Axle
• Outer Diameter [mm]: 100
• Internal Toothing differential side, conn. to conn. shaft: 33
• Manufacturer: LPR

• Transmission Type: Manual Transmission
• Internal Toothing wheel side: 28
• Internal Toothing differential side, conn. to transmission: 28
• Diameter 1 [mm]: 108
• Outer Diameter 2 [mm]: 108
• Manufacturer: BGA

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Fitting Position: Rear Axle, transmission sided
• Joint Type: CV Joint
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 100
• Bellows Material: Polychloroprene (Neoprene)
• Length [mm]: 32
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 33
• Diameter 1 [mm]: 100
• Manufacturer: BGA

Fitting Position: transmission sided, Front Axle Left, Front Axle Right

• Length [mm]: 34
• Internal Toothing differential side, conn. to transmission: 33
• for OE number: 191498103
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: GSP

Fitting Position: Rear Axle Left, Rear Axle Right, transmission sided

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: NPZ-VW-005
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Joint Diameter [mm]: 90
• Sealing Ring Diameter [mm]: 53
• Manufacturer: NTY

• Fabrication Number: NPW-VW-005
• Manufacturer: NTY
• Name: NTY NPW-VW-005

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, 4-Speed Automatic Transmission, Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission

• Transmission Type: Automatic Transmission
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Length [mm]: 105
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Diameter 1 [mm]: 98
• Outer Diameter 1 [mm]: 59.5
• Outer Diameter 2 [mm]: 98
• Manufacturer: BGA

• Fitting Position: Rear Axle Left, Rear Axle Right, Wheel Side
• Internal Toothing wheel side: 30
• External Toothing wheel side: 36
• Joint Type: CV Joint
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Length [mm]: 142.5
• Fitting Position: Wheel Side
• Specification: Groove type: OUTER
• Manufacturer: JAPKO

• Fabrication Number: NPW-VW-002
• Manufacturer: NTY
• Name: NTY NPW-VW-002

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 6-Speed Manual Transmission, 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 6-Speed Automatic Transmission, 7-Speed Dual-Clutch Transmission, Dual-Clutch Transmission

• Transmission Type: 6-Speed Manual Transmission
• Length [mm]: 34
• Internal Toothing differential side, conn. to transmission: 33
• for OE number: 377498103E
• Supplementary Article/Info 2: with bolts/screws, with lock tab
• Technical Information Number: Original design
• Manufacturer: GSP

Fitting Position: Rear Axle Left, transmission sided, Rear Axle Right

• Transmission Type: Manual Transmission
• Vehicle Identification Number (VIN) to: 8N-1-046000
• Fitting Position: Wheel Side
• Length [mm]: 143
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Length [mm]: 34
• Bore Diameter [mm]: 8.2
• Internal Toothing differential side, conn. to conn. shaft: 33
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 86
• Joint Diameter [mm]: 100
• Manufacturer: JPN

Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right

• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Front Axle
• Length [mm]: 129.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Manufacturer: MAGNETI MARELLI
• Name: MM TOJ0032

• Fitting Position: Front Axle, transmission sided
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 99.9
• Joint Type: Flexible Joint Disc
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Vehicle Identification Number (VIN) to: 8N-1-046000
• Transmission Type: Manual Transmission
• Length [mm]: 143
• Thread Size: M20x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Joint Diameter [mm]: 98
• Manufacturer: JPN

• Transmission Type: 6-Speed Manual Transmission
• Fitting Position: Wheel Side, Rear Axle Left, Rear Axle Right
• Length [mm]: 130
• Thread Size: M20X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Manufacturer: DRIVE

• Vehicle Identification Number (VIN) to: 8N-1-046000
• Fitting Position: Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle, Wheel Side, Front Axle Left
• Thread Size: M20 x 1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 98
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Vehicle Identification Number (VIN) to: 8N1046000
• Transmission Type: Manual Transmission
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Internal Toothing wheel side: 27
• External Toothing wheel side: 36
• Joint Type: CV Joint
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Vehicle Identification Number (VIN) to: 8N1046000
• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• for OE number: 1K0407331
• Technical Information Number: Non-Original design
• Manufacturer: GSP

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: outer
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• General Information: c.v.joint; outer; Inner tooth30; outer tooth22
• Manufacturer: VIKA

• Fitting Position: Wheel Side, Rear Axle
• Thread Size: M20x1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 81
• Name: Outer CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: transmission sided, Rear Axle
• Internal Toothing differential side, conn. to conn. shaft: 33
• Number of bores: 6
• Outer Diameter [mm]: 100
• Joint Type: Flexible Joint Disc
• Length from [mm]: 34
• Name: Inner CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: NPZ-VW-028
• Manufacturer: NTY

Transmission Type: 5-Speed Automatic Transmission, Manual Transmission, 6-Speed Manual Transmission, Semi-automatic, Automatic Transmission

• Fitting Position: Front Axle
• Length [mm]: 142.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Manufacturer: MAGNETI MARELLI
• Name: MM TOJ0033

• Vehicle Identification Number (VIN) from: 8N_1_046001
• Transmission Type: 6-Speed Manual Transmission
• Length [mm]: 105
• Thread Size: M16X1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Technical Information Number: Groove Type Inner
• Manufacturer: GSP

Fitting Position: Front Axle Left, Front Axle Right, Front Axle, Wheel Side

• Fitting Position: Front Axle, Wheel Side
• Vehicle Identification Number (VIN) to: 8N...1...046 000
• Transmission Type: Manual Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 98
• Bellows Material: Thermoplast
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Fabrication Number: NPW-VW-013
• Manufacturer: NTY
• Name: NTY NPW-VW-013

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Rear Axle Left, Rear Axle Right Transmission Type: 7-Speed Dual-Clutch Transmission, 6-Speed Manual Transmission, Manual Transmission, Dual-Clutch Transmission, Automatic Transmission, 5-Speed Manual Transmission, 6-Speed Dual-Clutch Transmission

• Engine Code: BAM, APX
• Transmission Type: Manual Transmission
• Lubrication: with grease lubrication
• Joint Diameter [mm]: 100
• Joint Type: CV Joint, Flexible Joint Disc
• Supplementary Article/Info 2: with bellow
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Full Set:
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

Fitting Position: Front Axle Left, Front Axle Right, transmission sided General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle, Wheel Side
• Transmission Type: Manual Transmission
• Vehicle Identification Number (VIN) to: 8N-1-046000
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Joint Type: CV Joint
• Drive Shaft: without ABS ring
• Length [mm]: 142.5
• Outer Diameter [mm]: 98
• Surface: Powder coated
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY

• Fitting Position: Rear Axle, transmission sided
• Joint Type: CV Joint
• Drive Shaft: without ABS ring
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 100
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY

• Fitting Position: Front Axle Right
• Length [mm]: 31.8
• Internal Toothing differential side, conn. to transmission: 28
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Wheel Side
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 98
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX
• Lisainfo: 25-5114MG
• Additional information: 25-5114MG

• Internal Toothing differential side, conn. to transmission: 28
• Length from [mm]: 32
• Quality class: PJ
• Name: Inner CV-joint

Fitting Position: transmission sided, Front Axle Right, Front Axle Left

• New Part:
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Vehicle Identification Number (VIN) from: 8N1046001
• Length [mm]: 105
• Sealing Ring Diameter [mm]: 53
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Specification: Groove Type: Inner
• Net weight [kg]: 2.14
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: NK
• Additional information: 5147150
• Lisainfo: 5147150

• Vehicle Identification Number (VIN): [31-N-105 279;], [;8L-X-001445], [8L-X-001446;]
• Fitting Position: Right, Left, Front Axle Left, outer
• Thread Size: M20x1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Version: 6 balls
• Manufacturer: SNR /NTN-SNR/
• Name: SN OJK54.009

• Fitting Position: transmission sided, Front Axle
• Length [mm]: 34
• Outer Diameter [mm]: 100
• Internal Toothing wheel side: 33
• Weight [kg]: 1.7
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 8N-1-046000
• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Braking/Drive Dynamics: for vehicles without ABS
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Outer Diameter [mm]: 98
• Sealing Ring Diameter [mm]: 53
• Manufacturer: LPR

• Vehicle Identification Number (VIN): [8L-X-001446;]
• Sealing Ring Diameter [mm]: 53
• Thread Size: M20x1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Version: 6 balls
• Length 2 [mm]: 129.5
• Name: SN OJK54.014
• Manufacturer: SNR

Fitting Position: Right, Left, Wheel Side, Front Axle Left, Front Axle Right

• Fitting Position: Wheel Side, Front Axle
• Thread Size: M20x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 98
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP

• Model Year from: 1999
• Model Year to: 2002
• Fitting Position: transmission sided, Front Axle
• Weight [kg]: 1.932
• Internal Toothing differential side, conn. to transmission: 33
• Sealing Ring Diameter [mm]: 100
• Outer Diameter [mm]: 99
• Joint Type: Flexible Joint Disc
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Fitting Position: Wheel Side, Rear Axle
• Thread Size: M20x1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 81
• Machined: with groove in inner part (inside)
• Technical Information: Pre-greased joint
• Manufacturer: SKF
• Name: SK VKJA3022

• Fitting Position: Rear Axle, transmission sided
• Length [mm]: 34
• Internal Toothing differential side, conn. to conn. shaft: 33
• Outer Diameter [mm]: 99.9
• Number of Holes: 6
• Joint Type: Flexible Joint Disc
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Model Year from: 1999
• Model Year to: 2002
• Fitting Position: Front Axle, Wheel Side
• Weight [kg]: 2.392
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 90
• Joint Type: CV Joint
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Fitting Position: Rear Axle, Wheel Side
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Supplementary Article/Supplementary Info: with grease
• Outer Diameter 1 [mm]: 81
• Outer Diameter 2 [mm]: 53
• Weight [kg]: 2.08
• Bellows Material: Thermoplast
• Supplementary Article/Info 2: with clamps
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 8N-1-046 000
• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Thread Size: M20x1,5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 98
• Machined: with groove in inner part (inside)
• Technical Information: Pre-greased joint
• Manufacturer: SKF
• Name: SK VKJA5399

• Fitting Position: Wheel Side, Rear Axle Left, Rear Axle Right
• Joint Type: CV Joint
• External Toothing wheel side: 36
• Internal Toothing wheel side: 30
• Sealing Ring Diameter [mm]: 53
• Machined: with groove in internal component
• Joint Diameter [mm]: 81
• Length [mm]: 129
• Thread Size: M20x1.5
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Info 2: with nut
• Supplementary Article/Supplementary Info: with grease
• Name: Liigendlaager, veovoll
• Manufacturer: GKN
• Lisainfo: C302961
• Additional information: C302961

• Vehicle Identification Number (VIN) to: 8N1046000
• Fitting Position: Wheel Side, Front Axle
• Weight [kg]: 2.49
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Joint Type: Flexible Joint Disc
• Internal Toothing differential side, conn. to conn. shaft: 33
• Machined: without groove in internal component
• Joint Diameter [mm]: 100
• Length [mm]: 34
• Supplementary Article/Info 2: with cap
• Bore Diameter [mm]: 8
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 86
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Fitting Position: transmission sided, Rear Axle Left, Rear Axle Right

• Vehicle Identification Number (VIN) to: 8N1046000
• Fitting Position: Front Axle, transmission sided
• Weight [kg]: 2.46
• Internal Toothing differential side, conn. to transmission: 28
• Sealing Ring Diameter [mm]: 108
• Outer Diameter [mm]: 107
• Joint Type: Flexible Joint Disc
• Packaging length [cm]: 18
• Packaging width [cm]: 11
• Packaging height [cm]: 11
• Manufacturer: FEBEST

• Vehicle Identification Number (VIN) from: 8N-1-046 001
• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Thread Size: M16x1.5
• External Toothing wheel side: 36
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 53
• Outer Diameter [mm]: 98
• Machined: with groove in inner part (inside)
• Technical Information: Pre-greased joint
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Vehicle Identification Number (VIN) to: 8N1046000
• Joint Type: Flexible Joint Disc
• Internal Toothing differential side, conn. to conn. shaft: 28
• Machined: without groove in internal component
• Joint Diameter [mm]: 108
• Length [mm]: 32
• Supplementary Article/Info 2: with cap
• Bore Diameter [mm]: 10.2
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 94
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Supplementary Info: with grease
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Fitting Position: Front Axle Left, Front Axle Right, transmission sided