Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Suspension: for vehicles with standard suspension
- Manufacturer: JP GROUP
- Lisainfo: Tower rubber stop
- Additional information: Tower rubber stop
- Fitting Position: Rear Axle
- Manufacturer: JP GROUP
- Fitting Position: Front Axle both sides
- Height of bump stop [mm]: 85
- Manufacturer: OYODO
- Thickness [mm]: 160
-
Material: PE
(Polyethylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.05
- Manufacturer: FEBI
- Additional information: FE36604
- Lisainfo: FE36604
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 4D0412137B
- Fitting Position: Front Axle
- Height [mm]: 80
- Material: Plastic
- Weight [g]: 38
- Inner Diameter 1 [mm]: 39
- Inner Diameter 2 [mm]: 63
- Name: IM 37423
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Height [mm]: 85
- for OE number: 8D0412131F
- Manufacturer: SASIC
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
- Height [mm]: 85
- Manufacturer: OPTIMAL ZAWIESZENIE
- Thickness [mm]: 160
-
Material: PE
(Polyethylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.05
- Name: SW 30 93 6604
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 80
- Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.04
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Thickness [mm]: 160
- Weight [kg]: 0.037
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 80
- Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.04
- Name: SW 30 93 6728
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 58
- Thickness [mm]: 85
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.1
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 8D0412131D
- Fitting Position: Front Axle
-
Material: PU
(Polyurethane) - Weight [g]: 85
- Name: IM 37435
- Manufacturer: ORIGINAL IMPERIUM
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Weight [kg]: 0.1
- Manufacturer: VAICO
Suspension: for vehicles without sports suspension, for vehicles without bad road version General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Name: CFD PK3302
- Manufacturer: DACO
- Fitting Position: Front Axle
- for OE number: 4D0412137C
- Manufacturer: KAMOKA AMORTYZATORY
- Quantity per packing unit: 4
- Fitting Position: Front Axle
-
Fabrication Number: AB-
VW- 018K - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
not for vehicle type: S4,
RS4 - Fitting Position: Front Axle
- Manufacturer: ASHIKA
- Fitting Position: Front Axle
- Manufacturer: JP GROUP
- Fitting Position: Front Axle
- Manufacturer: JP GROUP
-
Lisainfo: Dust Cover Kit,
shock absorber -
Additional information: Dust Cover Kit,
shock absorber
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane) - Weight [kg]: 0.1
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle type: 8H7
- Fitting Position: Rear Axle
- Manufacturer: ASHIKA
-
Fabrication Number: ZWT-
VW- 033SK - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Vehicle type: 8H7
- Fitting Position: Rear Axle
- Manufacturer: JAPKO
- Length [mm]: 100
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Weight [kg]: 0.08
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle type: 8HE
- Fitting Position: Rear Axle
- Manufacturer: ASHIKA
-
Fitting Position: Front Axle,
Front Axle both sides - Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
A4/A6/A8/PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
A4/A6/A8/PASSAT
(kvaliteediklass: PJ)"
-
not for vehicle type: S4,
RS4 - Fitting Position: Front Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
- Name: MM APK0064
- Fitting Position: Front Axle
- for OE number: 8D0412131F
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
- for OE number: 8D0412131F
- Manufacturer: AUTOFREN SEINSA
-
Name: SE D5-
096 - Additional information: D5096
- Lisainfo: D5096
-
Fitting Position: Front Axle,
Lower - Material: Rubber
-
Manufacturer: AUTO-
GH - Name: GH 624704
- Fitting Position: Front Axle
-
Material: Plastic,
PU (Polyurethane) - Weight [g]: 216
- Component Number: 4
- Name: IM 50135
- Manufacturer: ORIGINAL IMPERIUM
- Model Year from: 2007
- Weight [kg]: 0.157
- Packaging length [cm]: 12.2
- Packaging width [cm]: 3.1
- Packaging height [cm]: 3.1
- Manufacturer: FEBEST
- Model Year from: 2007
-
for combined PR number: 1BA,
1BD, 1BE, 1BV - Fitting Position: Rear Axle
- Weight [kg]: 0.352
- Required quantity: 1
- Packaging length [cm]: 18
- Packaging width [cm]: 12.2
- Packaging height [cm]: 6.1
- Manufacturer: FEBEST
-
not for vehicle type: S4,
RS4 - Quantity per packing unit: 2
- Fitting Position: Front Axle
- Manufacturer: KAYABA PK SM ZESTAWY
- Additional information: 915708 KYB
- Lisainfo: 915708 KYB
-
Fitting Position: Rear Axle,
Rear Axle both sides - Quality class: PJ
- Name: Shock absorber protection kit left+right
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
- Model Year from: 2007
-
for combined PR number: 1BA,
1BE, 1BV - Fitting Position: Front Axle
- Weight [kg]: 0.253
- Suspension: for vehicles with standard suspension
- Packaging length [cm]: 13.4
- Packaging width [cm]: 10.1
- Packaging height [cm]: 6.7
- Manufacturer: FEBEST
-
Material: PU
(Polyurethane), Rubber - Fitting Position: Front Axle
- Weight [kg]: 0.55
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Model Year from: 2007
-
for combined PR number: 1BA,
1BD, 1BE, 1BV - Fitting Position: Rear Axle
- Weight [kg]: 0.392
- Suspension: for vehicles with standard suspension
- Packaging length [cm]: 18
- Packaging width [cm]: 12.2
- Packaging height [cm]: 6.1
- Manufacturer: FEBEST
- Model Year from: 2007
-
for combined PR number: 1BA,
1BD, 1BE, 1BV - Fitting Position: Rear Axle
- Weight [kg]: 0.342
- Suspension: for vehicles with sports suspension
- Packaging length [cm]: 16.7
- Packaging width [cm]: 11.8
- Packaging height [cm]: 6.2
- Manufacturer: FEBEST
- Vehicle type: 8H7
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Name: KY 910225
- Manufacturer: KYB
- Fitting Position: Front Axle
- Quantity per packing unit: 2
- Weight [kg]: 0.3
- Guarantee: 5 years guarantee
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Manufacturer: SACHS
- Vehicle type: 8HE
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Manufacturer: KAYABA PK SM ZESTAWY
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane), Thermoplast - Weight [g]: 367
- Component Number: 4
- Name: IM 50339
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
- Manufacturer: SACHS
-
Vehicle Identification Number (VIN) to: 8H-
7- 400 000 - Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Manufacturer: BILSTEIN
- Name: Shock absorber protection kit left+right
- Quality class: Q
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks