• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Bearing for strut without bearing, front
• Additional information: Bearing for strut without bearing, front

• Fitting Position: Rear Axle Left, Rear Axle Right
• Lisainfo: Support for shock absorber, rear
• Additional information: Support for shock absorber, rear

• Specification: Type: universal
• Diameter [mm]: 12
• Fitting Position: Front Axle
• Manufacturer: JAPKO

• Fitting Position: Rear Axle
• Height [mm]: 38
• Required quantity: 2
• Material: Rubber/Metal
• Outer Diameter [mm]: 87
• Centering Diameter [mm]: 12
• for OE number: 4D0 412 377 D, 4D0 412 377 F
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

Fabrication Number: ZWT-VW-033SK

• Fitting Position: Front Axle
• for OE number: 4D0412137C
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Fabrication Number: AD-VW-039

• Fitting Position: Front Axle
• Mounting Type: Rubber-Metal Mount
• Supplementary Article/Info 2: without bearing
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Manufacturer: JP GROUP

• Specification: Type: universal
• Diameter [mm]: 12
• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: JPA

• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX
• Lisainfo: 72-2422
• Additional information: 72-2422

• Required quantity: 2
• Fitting Position: Front Axle
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Manufacturer: JP GROUP

• Fitting Position: Rear Axle
• for OE number: 3B0512131H
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Rear Axle
• for OE number: 3B0512131H
• Manufacturer: KAMOKA AMORTYZATORY

• Suspension: for vehicles with standard suspension
• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX
• Lisainfo: 72-1220
• Additional information: 72-1220

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX
• Lisainfo: 72-1219
• Additional information: 72-1219

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Suspension: for vehicles with sports suspension
• Manufacturer: JP GROUP

• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Manufacturer: JAPKO

• Block Separation:
• for PR number: 1BR
• Fitting Position: Front Axle
• Lisainfo: Dust Cover Kit, shock absorber
• Additional information: Dust Cover Kit, shock absorber

Suspension: for vehicles with sports suspension, for vehicles with standard suspension

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: AD-VW-028
• Manufacturer: NTY
• Name: NTY AD-VW-028

• Fitting Position: Rear Axle
• Manufacturer: JAPKO

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Rear Axle
• Material: Aluminium
• Mounting Type: Rubber-Metal Mount
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle, Front Axle both sides
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A4/A6/A8/PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A4/A6/A8/PASSAT
(kvaliteediklass: PJ)"

• Braking/Drive Dynamics: for vehicles without ABS
• for PR number: 1BE, 1BR, 1BV, 1X0, 1X1, 4P2
• Supplementary Article/Info 2: with protect screen, with nut
• Name: Rattakalde korrektuurkruvi
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Shape: round
• Name: CFD PK4761
• Manufacturer: DACO

• Fitting Position: Front Axle
• Name: CFD PK3302
• Manufacturer: DACO

• Fitting Position: Front Axle
• Outer Diameter [mm]: 113
• Inner Diameter [mm]: 12
• Name: Laager - K„„ndmik. VW P. A4 95- LE/PR
• Manufacturer: MAX

• for OE number: 3B0512131H
• Fitting Position: Rear Axle
• Material: PU (Polyurethane)
• Weight [g]: 289
• Component Number: 2
• Name: IM 51273
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Manufacturer: MAGNETI MARELLI
• Name: MM APK0064

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Fitting Position: Front Axle
• Required quantity: 2
• Name: TG 00726407
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: MAX

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• for OE number: 8D0412131F
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Manufacturer: TEDGUM

• Fitting Position: Rear Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without bad road version

• Fitting Position: Front Axle
• Material: Plastic, PU (Polyurethane)
• Weight [g]: 202
• Component Number: 4
• Name: IM 50135
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• for OE number: 4F0 513 353 D, 4F0 513 353 C, 4F0 513 353 B
• Fitting Position: Rear Axle Left, Rear Axle Right
• Quality class: PJ
• Name: Suspension strut support bearing left, right

• Fitting Position: Front Axle
• Material: Plastic, PU (Polyurethane)
• Suspension: for vehicles with standard suspension
• Weight [g]: 189
• Component Number: 4
• Version: Standard
• Name: IM 50140
• Manufacturer: ORIGINAL IMPERIUM

• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Fitting Position: Rear Axle, Rear Axle both sides
• Suspension: for vehicles with standard suspension
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI/VW
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI/VW
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Shape: round
• Name: CFD PK4726
• Manufacturer: DACO

• Fitting Position: Rear Axle
• Manufacturer: MAGNETI MARELLI
• Name: MM APK0079

• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 73, 67
• Inner Diameter [mm]: 11
• Manufacturer: MAX

Name: Laager - K„„ndmik. AUDI T. A4, A6/ SEAT EXEO, EXEO ST 1.6-4.2 11.00- LE/PR

• Model Year from: 2001
• Weight [kg]: 0.157
• Packaging length [cm]: 12.2
• Packaging width [cm]: 3.1
• Packaging height [cm]: 3.1
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Manufacturer: MAGNETI MARELLI
• Name: MM APK0068

• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Length [mm]: 138
• Inner Diameter [mm]: 11
• Height [mm]: 66
• Outer Diameter [mm]: 67, 73
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.41
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEB
• Additional information: F32164
• Lisainfo: F32164

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. AUDI T. A4, A6/ SEAT EXEO, EXEO ST 1.6-4.2 11.00- LE/PR

• Fitting Position: Front Axle
• for OE number: 8D0412131F
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: AUT
• Additional information: D5096
• Lisainfo: D5096

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Name: Vedruamordi tugilaager
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Length [mm]: 137.5
• Weight [kg]: 0.43
• Material: Rubber/Metal
• Inner Diameter [mm]: 10.5
• Outer Diameter [mm]: 66.5, 73
• Weight [g]: 430
• Manufacturer: METALCAUCHO

• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB
• Additional information: 915708 KYB
• Lisainfo: 915708 KYB

• for OE number: 8E0512137E
• Fitting Position: Rear Axle
• Material: PU (Polyurethane), Thermoplast
• Weight [g]: 287
• Component Number: 4
• Name: IM 50141
• Manufacturer: ORIGINAL IMPERIUM

• Section: Upper section
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.35
• Required quantity: 2
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: CORTECO

• Fitting Position: Rear Axle, Rear Axle both sides
• Suspension: for vehicles with sports suspension
• Quality class: PJ
• Name: Shock absorber protection kit left+right

• for OE number: 8E0 412 377, 8E0 412 377 C
• Fitting Position: Front Axle both sides
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A4
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A4
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: GSP

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. VW P. A4 95- LE/PR
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: AUT

• Construction Year from: 01.2001
• Fitting Position: Front Axle
• for OE number: 8E0412377C
• Manufacturer: SASIC

• Height [mm]: 57
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 113
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.378
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: CORTECO
• Name: COC 80001574

• Height [mm]: 57
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 113
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.378
• Supplementary Article/Info 2: without ball bearing
• Manufacturer: SWAG
• Name: SW 32 92 6360

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Height [mm]: 58
• Required quantity: 2
• Outer Diameter [mm]: 113
• Centering Diameter [mm]: 12.8
• for OE number: 8E0 412 377, 8E0 412 377 C
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Laager - K„„ndmik. AUDI T. A4, A6/ SEAT EXEO, EXEO ST 1.6-4.2 11.00- LE/PR

• for OE number: 4B0512137B
• Fitting Position: Rear Axle
• Material: PU (Polyurethane), Thermoplast
• Weight [g]: 311
• Component Number: 4
• Name: IM 50507
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• for OE number: 4F0 513 353 B, 4F0 513 353 C, 4F0 513 353 D
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer! Name: Laager - K„„ndmik. AUDI T. A4, A6/ SEAT EXEO, EXEO ST 1.6-4.2 11.00- LE/PR

• Fitting Position: Front Axle
• Weight [kg]: 0.384
• Supplementary Article/Supplementary Info: with attachment material
• Supplementary Article/Info 2: without ball bearing
• Name: SW 30 94 0384
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [kg]: 0.485
• Supplementary Article/Info 2: without ball bearing
• Supplementary Article/Supplementary Info: with attachment material
• Name: Remondikomplekt,vedruamordi tugilaager
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right, Left, Rear Axle
• Manufacturer: SNR /NTN-SNR/
• Name: SN KB957.13

• for combined PR number: 1BE+1BV
• Block Separation:
• for PR number: 1BR
• Material: PU (Polyurethane), Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.55
• Name: Puhver, vedrustus
• Manufacturer: FEB

Suspension: for vehicles with sports suspension, for vehicles with standard suspension General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 8E0 412 377, 8E0 412 377 C
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Name: Laager - K„„ndmik. VW P. A4 95- LE/PR
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• Fitting Position: Right, Left, Front Axle
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR /NTN-SNR/
• Name: SN KB657.16

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Rear Axle Left, Rear Axle Right
• Quantity per axle: 2
• for OE number: 4F0 513 353 B, 4F0 513 353 C, 4F0 513 353 D
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Name: Laager - K„„ndmik. VW T. A4 04-/A
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Manufacturer: KYB

Name: Laager - K„„ndmik. AUDI P. A4 1.6-3.2FSI 11.00-06.08 LE/PR

• Fitting Position: Rear Axle
• Manufacturer: KYB

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles without bad road version Name: Laager - K„„ndmik. AUDI T. A4, A6/ SEAT EXEO, EXEO ST 1.6-4.2 11.00- LE/PR

• Fitting Position: Front Axle
• for OE number: 8D0412131H
• Name: SE D5-119
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Front Axle
• Quantity per axle: 2
• General Information: SKF recommends always changing in pairs both sides
• Manufacturer: SKF
• Name: SK VKDA35123

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• for OE number: 8E0 412 377, 8E0 412 377 C
• Supplementary Article/Supplementary Info: Rolling Bearing is not required
• Name: Laager - K„„ndmik. VW P. A4 95-
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA