• Fitting Position: Front Axle both sides
• Number of Teeth: 45
• Width [mm]: 11
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 81
• Fabrication Number: NZA-AU-001
• Manufacturer: NTY
• Name: NTY NZA-AU-001
• Lisainfo: 45 T 81 MM / 77 MM / 11 MM
• Additional information: 45 T 81 MM / 77 MM / 11 MM

• Fitting Position: Front Axle
• Width [mm]: 11
• Number of Teeth: 45
• Outer Diameter [mm]: 81
• Inner Diameter [mm]: 77
• Name: ANDUR,ABS
• Manufacturer: MAX

• Fitting Position: Front Axle
• Number of Teeth: 45
• Inner Diameter [mm]: 77
• Thickness [mm]: 11
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 67
• Width [mm]: 11
• Number of Teeth: 45
• Outer Diameter [mm]: 107
• Name: ANDUR,ABS
• Manufacturer: MAX
• Lisainfo: 109114015
• Additional information: 109114015

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 67
• Width [mm]: 11
• Outer Diameter [mm]: 106.8
• Number of Teeth, ABS ring: 45
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: AUDI
• Additional information: AUDI

• Fitting Position: Front Axle
• Inner Diameter [mm]: 76.8
• Width [mm]: 11
• Outer Diameter [mm]: 80.7
• Number of Teeth, ABS ring: 45
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: VAG
• Additional information: VAG

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-003
• Manufacturer: NTY

• Cable Length [mm]: 1,035
• Sensor Type: Passive sensor
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-004
• Manufacturer: NTY

• Inner Diameter [mm]: 66.8
• Outer Diameter [mm]: 106.8
• Fitting Position: Rear Axle
• Number of Teeth, ABS ring: 45
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-AU-002
• Manufacturer: NTY

• Construction Year to: 05.2004
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 1,330
• Resistor [Ohm]: 1,750
• Number of pins: 2
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS124

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,015
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Construction Year to: 05.2004
• Vehicle Identification Number (VIN) to: 8E..4..400 000
• Fitting Position: Rear Axle Right
• Sensor Type: Inductive Sensor, Passive sensor
• Overall Length [mm]: 1,370
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

Vehicle Equipment: for vehicles with headlight levelling (automatic), for vehicles with headlight levelling (mechanical)

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,005
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 957
• Fitting Position: Front Axle Right, Front Axle Left
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0086

• Construction Year from: 06.2003
• Vehicle Identification Number (VIN) from: 8E..4..000 001
• Fitting Position: Front Axle
• Cable Length [mm]: 990
• Sensor Type: Passive sensor
• for OE number: 8E0927803B
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Inductive Sensor
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Vehicle Identification Number (VIN) to: 8E-3-350 000
• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Inductive Sensor
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Construction Year to: 05.2003
• Vehicle Identification Number (VIN) to: 8E..3..500 000
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Vehicle Identification Number (VIN) from: 8E-1-000 001
• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Fitting Position: Front Axle
• Number of pins: 2
• Cable Length [mm]: 560
• Sensor Type: Passive sensor
• Braking/Drive Dynamics: for vehicles with ABS

• Fitting Position: Rear Axle Right
• Number of pins: 2
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,330
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0096

• Construction Year to: 05.2004
• Vehicle Identification Number (VIN) to: 8E..4..400000
• Block Separation:
• Fitting Position: Rear Axle Right, Rear Axle
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: with cable
• Overall Length [mm]: 1,370
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

Vehicle Equipment: for vehicles with headlight levelling (automatic), for vehicles with headlight levelling (mechanical)

• Vehicle Identification Number (VIN) from: 8E_4_000001
• Fitting Position: Front Axle
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 06.2003
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,040
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 8E-4-400 000
• Fitting Position: Front Axle Right, Rear Axle Right
• Sensor Type: Inductive Sensor
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, rear, left/right
• Additional information: ABS sensor, rear, left/right

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: both sides
• Weight [kg]: 0.16
• Warranty: 3 years warranty
• Name: CE 06SKV352
• Manufacturer: ESEN SKV

• Construction Year from: 05.2003
• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,050
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,050
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Construction Year to: 05.2003
• Fitting Position: Front Axle
• Resistor [Ohm]: 1,650
• for OE number: 8E0927803A
• Number of pins: 7
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS031

• Construction Year to: 05.2003
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 8E_1_000001
• Vehicle Identification Number (VIN) to: 8E_3_500000
• Fitting Position: Front Axle
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 06.2004
• Fitting Position: Rear Axle Right
• Cable Length [mm]: 1,380
• Number of pins: 2
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS126

• Vehicle Identification Number (VIN) from: 8E-1-000 001
• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Vehicle Equipment: for vehicles with dynamic bending light
• Sensor Type: Hall Sensor
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle Identification Number (VIN) to: 8E-4-400000
• Block Separation:
• Supplementary Article/Info 2: with cable, with rubber grommet
• Length [mm]: 1,420
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

Vehicle Equipment: for vehicles without headlight levelling (automatic), for vehicles with headlight levelling (automatic) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 05.2004
• Fitting Position: Rear Axle, Rear Axle Left
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with control unit for aut. LDR
• Vehicle Identification Number (VIN) to: 8E..4..050000
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle Identification Number (VIN) from: 8E-5-000001
• for PR number: 8Q0, 8Q1, 8Q3, 8Q5
• Block Separation:
• Supplementary Article/Info 2: with cable, with rubber grommet
• Length [mm]: 1,450
• Braking/Drive Dynamics: for vehicles with ABS
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front
• Length [mm]: 975
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 06SKV038

• Vehicle Identification Number (VIN) from: 8E-1-000001
• Fitting Position: Rear Axle, Rear Axle Right
• Block Separation:
• Vehicle Equipment: for vehicles with dynamic bending light
• Required quantity: 1
• Sensor Type: Hall Sensor
• Cable Length [mm]: 1,360
• Number of pins: 2
• paired article number: 20-0337
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Construction Year to: 05.2003
• Fitting Position: Front
• Length [mm]: 980
• Voltage [V]: 12
• Weight [kg]: 0.16
• Colour: black
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 06SKV026
• Manufacturer: ESEN SKV

• Fitting Position: Front Axle
• Construction Year from: 05.2003
• Sensor Type: Passive sensor
• Number of occupied pins: 4
• Cable Length [mm]: 1,035
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Construction Year to: 05.2003
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,022
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 8E..5..000 001
• Fitting Position: Rear Axle
• Warranty: 5 years warranty
• Name: HU 131407
• Manufacturer: HUECO / HITACHI

• Fitting Position: Rear Axle Left, Rear Axle Right
• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 1,372
• Manufacturer: AUTOFREN SEINSA

• Fitting Position: Rear Axle Left
• Vehicle Identification Number (VIN) from: 8E-5-000001
• for PR number: 8Q3
• Sensor Type: Inductive Sensor
• Length 1 [mm]: 925
• Length 2 [mm]: 1,355
• Overall Length [mm]: 1,445
• Braking/Drive Dynamics: for vehicles with ABS
• Connector Shape: oval
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with cable, with buckle protection, with rubber grommet General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 8E-4-000001>8E-5-400
• Sensor Type: Passive sensor
• Number of occupied pins: 4
• Cable Length [mm]: 1,035
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Vehicle Identification Number (VIN) from: 8E5000001
• for PR number: 8Q3
• Fitting Position: Rear Axle Left
• Sensor Type: Passive sensor
• Length [mm]: 1,195
• Socket colour: black

• Vehicle Identification Number (VIN) to: 8E-4-400 000
• Required quantity: 1
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Vehicle Identification Number (VIN) from: 8E-5-000 001
• Required quantity: 1
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Name: CZUJNIK ABS VW T. A4 PR 02-
• Manufacturer: BRM

• Fitting Position: Front Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) to: 8E_3_500 000
• Cable Length [mm]: 975
• Fitting Depth [mm]: 28.1
• Number of pins: 4
• Resistance [Ohm]: 2,300
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Rear Axle, Rear Axle Right
• Vehicle Identification Number (VIN) to: 8E_4_400000
• for PR number: 8Q0, 8Q1, 8Q3
• Block Separation:
• Vehicle Equipment: for vehicles with Xenon light
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,370
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Weight [kg]: 0.34
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 96SKV136

• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Number of connectors: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.121
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 08.2004
• Fitting Position: Rear
• Length [mm]: 1,385
• Number of pins: 2
• Plug Type: Female
• Voltage [V]: 12
• Weight [kg]: 0.17
• Operating Mode: Electric
• Warranty: 3 years warranty
• Socket colour: black
• Name: CE 06SKV338
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 8E_5_000001
• for PR number: 8Q0, 8Q1
• Cable Length [mm]: 1,370
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU012806891

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Identification Number (VIN) from: 8E-1-000 001
• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Sensor Type: Passive sensor
• Cable Length [mm]: 990
• Braking/Drive Dynamics: for vehicles with ABS
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Vehicle Identification Number (VIN) to: 8E-3-500000
• Number of pins: 2
• Cable Length [mm]: 1,005
• Fitting Position: Front Axle
• Corresponds to the original part in colour: black
• Sensor Type: Inductive Sensor
• Manufacturer: FAE

• Construction Year to: 05.2004
• Fitting Position: Rear Axle Left
• Resistor [Ohm]: 1,750
• Name: MM MWSS125
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Left, Right, Front Axle
• Quantity: 2
• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Length [mm]: 1,035
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Height [mm]: 28
• Required quantity: 2
• Resistor [Ohm]: 1,750
• Cable Length [mm]: 1,000
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 4
• Number of connectors: 2
• Weight [kg]: 0.126
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, Rear Axle Right
• Vehicle Identification Number (VIN) from: 8E_5_000001
• for PR number: 8Q0, 8Q1, 8Q3
• Block Separation:
• Vehicle Equipment: for vehicles with Xenon light
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,370
• Manufacturer: DELPHI
• Name: DE SS20406

• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Number of connectors: 4, 2
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.12
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 8E_4_000 001
• Cable Length [mm]: 975
• Fitting Depth [mm]: 28.1
• Number of pins: 4
• Resistance [Ohm]: 1,600
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Rear Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) to: 8E_4_400000
• for PR number: 8Q0, 8Q1
• Cable Length [mm]: 1,340
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU012806831

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Vehicle Identification Number (VIN) from: 8E-5-000 001
• for PR number: 8Q3
• paired article number: 0900806
• Manufacturer: METZGER

• Fitting Position: Rear Axle Left
• Vehicle Identification Number (VIN) to: 8E-4-400 000
• for PR number: 8Q3
• Sensor Type: Passive sensor
• paired article number: 06-S290
• Length 1/ Length 2 [mm]: 1307/620
• Manufacturer: OPTIMAL ZAWIESZENIE

• Vehicle Identification Number (VIN) from: ******8E*5*000001
• Fitting Position: Rear Axle, Rear Axle Right
• for PR number: 8Q0, 8Q1, 8Q3
• Block Separation:
• paired article number: 104173
• Number of connectors: 2
• Resistor [Ohm]: 1,700
• Cable Length [mm]: 1,365
• Weight [kg]: 0.14
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Rear Axle Right
• Required quantity: 2, 1
• for PR number: 8Q0, 8Q1, 8Q3
• Vehicle Identification Number (VIN) to: 8E_4_400000
• Block Separation:
• Vehicle Equipment: for vehicles with Xenon light
• Cable Length [mm]: 1,370
• Fitting Depth [mm]: 28.1
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Vehicle Identification Number (VIN): [8E-3-400001;], [8E-4-000 001;], [8E-4-000001;]
• Fitting Position: Right, Left, Front Axle
• Cable Length [mm]: 1,005
• Manufacturer: SNR /NTN-SNR/

• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with Xenon light
• Required quantity: 1
• for PR number: 8Q3
• Vehicle Identification Number (VIN) from: 8E_5_000001
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with Xenon light
• Required quantity: 1
• for PR number: 8Q3
• Vehicle Identification Number (VIN) to: 8E_4_400000
• Cable Length [mm]: 1,370, 975
• Fitting Depth [mm]: 28
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI
• Lisainfo: VAG
• Additional information: VAG

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Vehicle Identification Number (VIN) to: 8E-5-400 000
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,335
• Wear Warning Contact: prepared for wear indicator
• Number of pins: 6
• Fitting Position: Rear Axle Left
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Rear Axle, Rear Axle Right
• Required quantity: 2, 1
• for PR number: 8Q0, 8Q1, 8Q3
• Vehicle Identification Number (VIN) from: 8E_5_000001
• Block Separation:
• Vehicle Equipment: for vehicles with Xenon light
• Cable Length [mm]: 1,400
• Fitting Depth [mm]: 28.1
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Vehicle Identification Number (VIN) to: 8E-4-400 000
• Sensor Type: Active sensor
• Cable Length [mm]: 1,340
• Wear Warning Contact: prepared for wear indicator
• Number of pins: 2, 6
• Fitting Position: Rear Axle Left
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Vehicle Identification Number (VIN) from: 8E-1-000 001
• Fitting Position: Rear Axle, Rear Axle Right
• Required quantity: 2, 1
• Block Separation:
• Vehicle Equipment: for vehicles with dynamic bending light
• Sensor Type: Hall Sensor
• Cable Length [mm]: 1,360
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Vehicle Identification Number (VIN) to: 8E-4-400 000
• Required quantity: 1
• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: with cable
• Name: CZUJNIK ABS AUDI T. A4 00-
• Manufacturer: BRM

• Quantity: 1
• Vehicle Identification Number (VIN) to: 8E-4-400 000
• Fitting Position: Right Rear, Left
• General Information: ABS speed sensor; rear left
• Manufacturer: VIKA

• Construction Year from: 06.2004
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with control unit for aut. LDR, with cable
• Vehicle Identification Number (VIN) from: 8E..5..000 001
• Block Separation:
• Sensor Type: Inductive Sensor
• Overall Length [mm]: 1,410
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BOS