• Fitting Position: Front Axle, transmission sided
• Internal Toothing differential side, conn. to conn. shaft: 34
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, inner
• Additional information: CV joint kit, front, inner

• Vehicle Identification Number (VIN) from: 8E-4-195 501
• Transmission Type: Automatic Transmission
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of Teeth, ABS ring: 45
• Length [mm]: 98
• Diameter 1 [mm]: 98
• ABS Ring Ø [mm]: 81
• Outer Diameter 1 [mm]: 59.5
• Outer Diameter 2 [mm]: 98
• Thread Size: M16x1,5
• Manufacturer: BGA

• Fitting Position: Wheel Side
• Number of Teeth, ABS ring: 45
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 102
• Thread Size: M16x1,5x77
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• ABS Ring Ø [mm]: 81
• Supplementary Article/Info 2: with screw
• Outer Diameter [mm]: 100
• Bellows Material: TPE (thermoplastic elastomer)
• Fabrication Number: NPZ-AU-047
• Manufacturer: NTY

• Vehicle Identification Number (VIN) to: 8E-4-195 500
• Transmission Type: Automatic Transmission
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 60
• Number of Teeth, ABS ring: 45
• Length [mm]: 97
• Diameter 1 [mm]: 98
• ABS Ring Ø [mm]: 81
• Outer Diameter 1 [mm]: 59.5
• Outer Diameter 2 [mm]: 98
• Thread Size: M16x1,5
• Manufacturer: BGA

• Transmission Type: Automatic Transmission
• Vehicle Identification Number (VIN) to: 8E-4-195500
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Lubrication: with grease lubrication
• Joint Diameter [mm]: 99.5
• Supplementary Article/Info 2: with bellow, with ABS sensor ring
• Supplementary Article/Supplementary Info: with attachment material
• Quantity per axle: 2
• Full Set:
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Wheel Side, transmission sided
• Number of Teeth, ABS ring: 45
• Thread Size: M16 x 1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 99.5
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Engine Code: BCZ, BDG
• Fitting Position: Wheel Side
• Number of Teeth, ABS ring: 45
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Diameter 1 [mm]: 28
• Seal Diameter [mm]: 59
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Wheel Side
• Number of Teeth, ABS ring: 45
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Length [mm]: 102
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fitting Position: Wheel Side
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Joint Type: CV Joint
• Drive Shaft: with ABS ring
• Length [mm]: 102
• Outer Diameter [mm]: 100
• Number of Teeth, ABS ring: 45
• Transmission Type: Manual Transmission
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Engine Code: BCZ, BDG
• Fitting Position: Front Axle, Wheel Side
• Internal Toothing wheel side: 27
• External Toothing wheel side: 38
• Number of Teeth, ABS ring: 45
• Joint Type: CV Joint
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Fitting Position: Wheel Side
• Number of Teeth, ABS ring: 45
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Length [mm]: 102
• Specification: Groove type: MIDDLE
• Manufacturer: ASHIKA

• Fitting Position: Front Axle Right, Front Axle Left
• Internal Toothing wheel side: 34
• Fabrication Number: NPW-VW-006

• Transmission Type: Automatic Transmission
• Vehicle Identification Number (VIN) from: 8E-4-195501
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Lubrication: with grease lubrication
• Joint Diameter [mm]: 100
• Joint Type: CV Joint
• Supplementary Article/Info 2: with bellow, with ABS sensor ring
• Supplementary Article/Supplementary Info: with attachment material
• Full Set:
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BCZ, BDG
• Fitting Position: Wheel Side
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Length [mm]: 97.8
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Construction Year from: 01.2004
• Transmission Type: Semi-automatic
• Vehicle Identification Number (VIN) from: 8E4195501
• Fitting Position: Front Axle, Wheel Side
• External Toothing differential side: 27
• Internal Toothing wheel side: 27
• External Toothing wheel side: 38
• Number of Teeth, ABS ring: 45
• Lisainfo: Joint Kit, drive shaft
• Additional information: Joint Kit, drive shaft

• Engine Code: BCZ, BDG, BFC
• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Joint Type: CV Joint
• Drive Shaft: with ABS ring
• Length [mm]: 97.5
• Outer Diameter [mm]: 98
• Number of Teeth, ABS ring: 45
• Surface: Powder coated
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY

• Fitting Position: Front Axle, Wheel Side
• Vehicle Identification Number (VIN) from: 8E...4...195501
• Transmission Type: Automatic Transmission
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Joint Type: Tripod Joint
• Number of Teeth 1: 34
• Length [mm]: 84
• Transmission Type: 6-Speed Manual Transmission
• Fabrication Number: NPW-AU-001
• Manufacturer: NTY
• Name: NTY NPW-AU-001

Fitting Position: Front Axle, Front Axle Left, Front Axle Right, transmission sided

• Construction Year to: 12.2003
• Vehicle Identification Number (VIN) to: 8E4195500
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of Teeth, ABS ring: 45
• Supplementary Article/Info 2: with screw
• Thread Size: M16x1.5x72
• Bellows Material: TPE (thermoplastic elastomer)
• Length [mm]: 102
• ABS Ring Ø [mm]: 81
• Seal Diameter [mm]: 60
• Name: Liigendlaager, veovoll
• Manufacturer: MAX

Fitting Position: Wheel Side, Front Axle Left, Front Axle Right, Front Axle

• Fitting Position: Front Axle
• Engine Code: BFC
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 99.5
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP

• Engine Code: BCZ/BDG/BFC
• Fitting Position: Front Axle, Wheel Side
• for OE number: 8E0407305B
• Length [mm]: 102
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle
• Length [mm]: 96
• Internal Toothing differential side, conn. to transmission: 34
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Construction Year from: 01.2004
• Vehicle Identification Number (VIN) from: 8E4195501
• Fitting Position: Front Axle, Wheel Side
• Length [mm]: 97.5
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Technical Information Number: Original design
• Version: Two
• Manufacturer: GSP

• Fitting Position: Front Axle
• Length [mm]: 68
• External Toothing wheel side: 38
• External Toothing differential side: 27
• Seal Diameter [mm]: 59.5
• Specification: BELL PIN LENGTH - 34
• Manufacturer: MAGNETI MARELLI
• Name: MM TOJ0038

• Fitting Position: transmission sided
• Internal Toothing differential side, conn. to conn. shaft: 34
• Manufacturer: LPR
• Additional information: KAD865 LPR
• Lisainfo: KAD865 LPR

• Fitting Position: Front Axle, Wheel Side
• Length [mm]: 97.5
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Technical Information Number: Non-Original design
• Version: One
• Manufacturer: GSP

Transmission Type: Manual Transmission, CVT automatic transmission (stepless)

• Fitting Position: Wheel Side, Front Axle
• Engine Code: BCZ/BDG/BFC
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 60
• Number of Teeth, ABS ring: 45
• Length from [mm]: 102
• Quality class: PJ
• Name: Outer CV-joint

• Fitting Position: Front Axle
• Engine Code: BCZ,BDG
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.6
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 100
• Bellows Material: Rubber
• Manufacturer: METELLI

• Fitting Position: Wheel Side, Front Axle
• Engine Code: BCZ, BDG, BFC
• Transmission Type: Manual Transmission
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 60
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Name: Outer CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Construction Year to: 12.2003
• Vehicle Identification Number (VIN) to: 8E4195500
• Engine Code: Ec_BFC
• Fitting Position: Front Axle, Wheel Side
• for OE number: 4D0407305B
• Length [mm]: 102
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Technical Information Number: Non-Original design, Groove Type Inner
• Manufacturer: GSP

• Construction Year from: 01.2004
• Transmission Type: Semi-automatic
• Vehicle Identification Number (VIN) from: 8E4195501
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Length [mm]: 97.5
• External Toothing wheel side: 38
• Fitting Position: Wheel Side
• Weight [kg]: 2.73
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• New Part:
• Transmission Type: CVT automatic transmission (stepless)
• Vehicle Identification Number (VIN) from: 8E_4_195501
• Length [mm]: 85
• Joint Diameter [mm]: 88.5
• Internal Toothing differential side, conn. to conn. shaft: 34
• Net weight [kg]: 2.39
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: NK

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Transmission Code: MT
• Fitting Position: Front Axle
• Internal Toothing differential side, conn. to transmission: 34
• Length [mm]: 85
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX
• Lisainfo: 26-5502MG
• Additional information: 26-5502MG

• Construction Year from: 01.2004
• Vehicle Identification Number (VIN) from: 8E4195501
• Fitting Position: Front Axle
• Length [mm]: 63
• External Toothing wheel side: 38
• External Toothing differential side: 27
• Seal Diameter [mm]: 59.5
• Specification: BELL PIN LENGTH - 34
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle
• Internal Toothing differential side, conn. to conn. shaft: 34
• Outer Diameter [mm]: 84
• Joint Type: Tripod Joint
• Name: Liigendlaager, veovoll
• Manufacturer: MAX

• Vehicle Identification Number (VIN): [8E-4-000 001;]
• Fitting Position: outer
• Supplementary Article/Info 2: with rubber mount
• Seal Diameter [mm]: 59.5
• Thread Size: M16x1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of pins: 45
• Version: 6 balls
• Length 2 [mm]: 102
• Manufacturer: SNR /NTN-SNR/
• Name: SN OJK54.021

• Fitting Position: Wheel Side
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Joint Type: CV Joint
• Drive Shaft: with ABS ring
• Length [mm]: 102
• Outer Diameter [mm]: 100
• Number of Teeth, ABS ring: 45
• Surface: Powder coated
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY

• Supplementary Article/Info 2: with rubber mount
• Seal Diameter [mm]: 59.5
• Thread Size: M16x1,5
• External Toothing wheel side: 38
• Length 2 [mm]: 97.5
• Internal Toothing wheel side: 27
• Number of pins: 45
• Fitting Position: outer
• Name: SN OJK54.036
• Manufacturer: SNR

• Fitting Position: transmission sided
• General Information: c.v.joint; inner; Inner tooth28mm
• Manufacturer: VIKA

• Vehicle Identification Number (VIN) to: 8H-4-014 950
• Engine Code: BDG, BCZ, BFC
• Transmission Type: Fully Automatic
• Fitting Position: transmission sided, Front Axle
• Bore Ø [mm]: 10.5
• Internal Toothing differential side, conn. to conn. shaft: 34
• Number of bores: 6
• Outer Diameter [mm]: 84
• Bolt Hole Circle Ø [mm]: 104
• Joint Type: Tripod Joint
• Machined: with groove in inner part (inside)
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Vehicle Identification Number (VIN): [8E-4-000001;], [8E-4-195 501;]
• Fitting Position: Right, Left, Front Axle
• Joint Type: Disc Joint
• Inner Diameter 2 [mm]: 124
• External Toothing differential side: 34
• Length 2 [mm]: 85
• Manufacturer: SNR /NTN-SNR/
• Name: SN IJK54.001

• Transmission Type: Automatic Transmission
• for OE number: 1308629
• Length [mm]: 82
• Internal Toothing differential side, conn. to transmission: 34
• Technical Information Number: TJ, Non-Original design
• Manufacturer: GSP

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Engine Code: BCZ, BDG, BFC
• Transmission Type: Manual Transmission
• Fitting Position: Front Axle, Wheel Side
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Machined: with groove in inner part (inside)
• Technical Information: Pre-greased joint
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Fitting Position: Front Axle
• External Toothing differential side: 34
• Specification: BELL PIN LENGTH - 85
• Manufacturer: MAGNETI MARELLI

• Vehicle Identification Number (VIN) from: 8E-4-195 501
• Engine Code: BDG, BFC, BCZ
• Transmission Type: Fully Automatic
• Fitting Position: transmission sided, Front Axle
• Length [mm]: 84
• Internal Toothing differential side, conn. to conn. shaft: 34
• Outer Diameter [mm]: 123
• Number of Holes: 6
• Joint Type: Tripod Joint
• Machined: with groove in inner part (inside)
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Vehicle Identification Number (VIN) from: 8E-4-195 501
• Engine Code: BDG, BFC, BCZ
• Transmission Type: Fully Automatic
• Fitting Position: Front Axle, Wheel Side
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Machined: with groove in inner part (middle)
• Technical Information: Pre-greased joint
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Fitting Position: Front Axle, Wheel Side
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Outer Diameter [mm]: 98
• Number of Teeth, ABS ring: 45
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle, transmission sided
• Weight [kg]: 2.22
• Internal Toothing differential side, conn. to transmission: 34
• Seal Diameter [mm]: 100
• Outer Diameter [mm]: 85
• Joint Type: Tripod Joint
• Packaging length [cm]: 16.5
• Packaging width [cm]: 10
• Packaging height [cm]: 10
• Manufacturer: FEBEST

• Fitting Position: Front Axle, Wheel Side
• Number of Teeth, ABS ring: 45
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Length [mm]: 102
• Machined: with groove in inner part (middle)
• Manufacturer: METZGER

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Code: FRF
• Transmission Type: 6-Speed Manual Transmission
• Engine Code: BFC, BCZ, BDG
• Block Separation:
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of Teeth, ABS ring: 45
• ABS Ring Ø [mm]: 81
• Seal Diameter [mm]: 60
• Machined: with groove in internal component
• Joint Diameter [mm]: 100
• Length [mm]: 102
• Thread Size: M16x1.5x77
• Bellows Material: TPE (thermoplastic elastomer)
• New Part:
• Supplementary Article/Info 2: with screw
• Name: PRZEGUB ZEW. AUDI/SEAT 38X59,5X27 ABS 45Z
• Manufacturer: GKN

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!