• Üldine informatsioon: temperature sensor
• Manufacturer: VIKA

• Colour Coding: dark grey
• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: dark grey
• Fitted Diameter [mm]: 25
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 20
• for OE number: 06A919501A
• Manufacturer: MEAT&DORIA

• Engine Code: BBJ
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Engine Code: BBJ
• Colour: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Engine Code: BBJ
• Colour: grey
• for article number: 26.0015K, 7.3278K, 7.7946
• Manufacturer: FACET

• Engine Code: BBJ
• Housing Colour: green
• Corresponds to the original part in colour: black
• Manufacturer: FACET

• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: green
• Fitted Diameter [mm]: 20
• Diameter [mm]: 25.5
• for OE number: 059919501A
• Manufacturer: MEAT & DORIA

• Sensor Type: NTC Sensor
• Colour Coding: green
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA109

• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Length [mm]: 20
• Colour Coding: grey
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA111

• OE-numbri jaoks: 059 919 501 A
• paaris tootenumbrid: at10064
• Laius (mm): 58
• Kõrgus (mm): 25
• Pikkus (mm): 25
• Kaal (g): 27
• Garantii: 3 aastat garantii
• Pistikkontaktide arv: 4
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Number of connectors: 4
• Connector Shape: round
• Weight [kg]: 0.017, 0.027
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Fabrication Number: ECP-VW-010
• Manufacturer: NTY

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 4
• Fitted Diameter [mm]: 20
• Housing Colour: black
• Manufacturer: FAE

• Required quantity: 4
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: D Shape
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Resistor [Ohm]: 13
• Height [mm]: 23.8
• Manufacturer: VERNET

• for OE number: 06C 905 163 B
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Length [mm]: 60
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Sensor Type: Hall Sensor
• Number of connectors: 3
• Supplementary Article/Info 2: for camshaft, without cable, with seal ring
• for OE number: 06C 905 163 B
• Colour: black
• Shape: straight
• Number of pins: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Connector Shape: D Shape
• Colour Coding: light blue
• Weight [kg]: 0.014
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BBJ
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• Required quantity: 4
• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour Coding: light blue
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Weight [kg]: 0.031
• Alternative Repair Kit: 550027
• Manufacturer: ERA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black/blue
• Manufacturer: BREMI

• Engine Code: BBJ
• Number of pins: 3
• Sensor Type: Hall Sensor
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-011
• Manufacturer: NTY
• Name: NTY ESL-AU-011

• for OE number: 036906051C
• Colour: black
• Alternatively:
• Number of pins: 4
• Alternative Repair Kit: 550491
• Manufacturer: ERA

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Length [mm]: 59.9
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Technical Information: Please note colour of connector
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 4
• Värv: roheline
• Kaal (kg): 0,02
• Ühenduste arv: 3
• Üldine informatsioon: hall sender camshaft
• Manufacturer: VIKA

Manufacturer: BOSCH

• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: D Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Ühenduste arv: 2
• Installatsiooni sügavus (mm): 20
• Värvimarkeering: hall
• Manufacturer: BERU

Manufacturer: FAE

• Colour: blue
• Cable Length [mm]: 460
• Number of pins: 3
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Number of pins: 3
• Fitting Depth [mm]: 24
• Weight [kg]: 0.031
• Manufacturer: ERA

• General Information: camshaft position sensor
• Manufacturer: BORSEHUNG

• Cable Length [mm]: 570
• Number of pins: 3
• Housing Colour: blue
• Manufacturer: FAE

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: Gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: Left, Right, after catalytic converter
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Number of pins: 5
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Left Front, Right Front, after catalytic converter
• Quantity: 2
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.156
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left, Right, Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Quantity: 2
• Cable Length [mm]: 1,530
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Engine Code: BBJ
• Vehicle Identification Number (VIN) from: 8E-3-000 001
• Number of pins: 3
• Colour: blue
• Name: Detonatsiooniandur
• Manufacturer: VDO

• Voltage [V]: 12
• Fabrication Number: EPP-AU-032
• Manufacturer: NTY

• Fabrication Number: EPP-AU-034
• Manufacturer: NTY

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 1,750
• Number of circuits: 4
• Manufacturer: ERA

• Fitting Position: Left, Right
• Oxygen Sensor: Unheated
• Number of pins: 4
• Cable Length [mm]: 1,050
• Quality: OE EQUIVALENT
• for OE number: 058906265B
• Manufacturer: MEAT&DORIA

• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 1,731
• Resistor [Ohm]: 9
• Cable Length [mm]: 1,731
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Fitting Position: before catalytic converter
• Manufacturer Restriction: VAG
• Number of pins: 6
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Socket Width [mm]: 2.8
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left, Right
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Housing Type: with housing
• Number of pins: 5
• Housing material: Plastic
• Connector Shape: D Shape
• Number of mounting bores: 2
• Supplementary Article/Info 2: with integrated grille
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Left, Right, Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Planar probe, Heated
• Quantity: 2
• Cable Length [mm]: 1,200
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"

• Oxygen Sensor: Diagnostic Probe, Heated
• Fitting Position: Right, Left, after catalytic converter
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 1,760
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: Left, after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 1,800
• Number of pins: 4
• Recommended change interval [km]: 160,000
• Weight [kg]: 0.166
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,760
• Weight [kg]: 0.155
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left, Right, Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Planar probe
• Required quantity: 2
• Cable Length [mm]: 750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066401

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left, Right
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 1,760
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Left, after catalytic converter
• Length [mm]: 800
• Technical Information Number: Universal 77015
• Manufacturer: FAE

Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Regulating Probe
• Length [mm]: 1,700
• Number of pins: 4
• Supplementary Article/Info 2: with mounting manual
• Manufacturer: FAE

• Quantity: 1
• Housing Type: without housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black/silver
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: Ohumassimootja
• Manufacturer: DLP

• Fitting Position: Left, Right, Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Regulating Probe
• Required quantity: 2
• Cable Length [mm]: 1,750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066391

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda andur: soojendatud
• Pistikkontaktide arv: 4
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Required quantity: 2
• Number of pins: 4
• Cable Length [mm]: 1,800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Weight [kg]: 0.23
• Manufacturer: VALEO

Oxygen Sensor: Diagnostic Probe, Planar probe, Thread pre-greased, Heated Fitting Position: before catalytic converter, after catalytic converter

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 800
• Number of pins: 6
• Manufacturer: FAE
• Additional information: 75357 FAE
• Lisainfo: 75357 FAE

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Manufacturer: BREMI
• Additional information: FE30097
• Lisainfo: FE30097

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter, Left, Right, Front
• Required quantity: 2
• Length [mm]: 950
• Number of connectors: 5
• Manufacturer: VERNET

• Engine Code: BBJ
• Fitting Position: Right, Left
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: brown
• Connector Shape: D Shape
• Overall Length [mm]: 1,450
• Weight [kg]: 0.17
• Length [mm]: 1,420
• for OE number: 078 906 265 T
• Thread Size: M18 x 1,5
• Cable Length [mm]: 1,150
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left, Right, Front, before catalytic converter
• Oxygen Sensor: Regulating Probe, Oxygen Sensor, Heated
• Quantity: 2
• Cable Length [mm]: 950
• Manufacturer: DELPHI
• Name: DE ES10921-12B1

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Colour: red
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV905
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Probe, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 5
• Cable Length [mm]: 600
• for article number: 81528E
• Quality: OE EQUIVALENT
• for OE number: 06A906262AE
• Manufacturer: MEAT&DORIA