Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Operating voltage [V]: 12
- Rated Power [W]: 480
- Rated current [A]: 40
- Combi Switch Function: Normally Open Contact
- Number of pins: 4
-
Lisainfo: Relay,
12 Volt, 40 Amp -
Additional information: Relay,
12 Volt, 40 Amp
Relay function: Terminal 75, Interior Blower, Suction pipe pre-heating, Sunroof, Pump, fuel pre-supply, Start-stop system, Magnetic clutch, Surge protection, Battery main switch, Engine control unit, Normally open contact, X contact relief, Fan, engine cooling, Electric booster heater, Secondary Air System, Water pump after-run, Rear window wiper, heater/air conditioning, Clamp 15, Fuel Pump, Window Regulator, Heated windscreen, Heated rear window, Parking Heater
- Nominaalpinge (V): 12
- Nimivool [A]: 30
- Piirangutega toode/piirangu info: ilma kinnituseta
- Pistikkontaktide arv: 5
-
Lüliti funktsioon: ilma tule ümberlülitusfunktsioonita,
Lukustaja - temperatuurivahemik alates [°C]: −40
- Temperatuurivahemik kuni [°C]: 100
- Korpusetüüp: Sünteetikakorpus
- Üldine informatsioon: relay
- Manufacturer: VIKA
- Ühenduste arv: 4
- Nominaalpinge (V): 12
- Nimivool [A]: 40
- temperatuurivahemik alates [°C]: −40
- Temperatuurivahemik kuni [°C]: 85
- Üldine informatsioon: relay
- Manufacturer: VIKA
-
Kaal (kg): 0,
035 - vajaminev tükihulk: 1
- Ühenduste arv: 4
- Üldine informatsioon: fuel pump relay
- Manufacturer: VIKA
- Ühenduste arv: 5
-
Kaal (kg): 0,
01 - Pinge [V]: 12
- Üldine informatsioon: relay
- Manufacturer: VIKA
- Nominaalpinge (V): 12
- Nimivool [A]: 70
- temperatuurivahemik alates [°C]: −40
- Temperatuurivahemik kuni [°C]: 85
- Üldine informatsioon: relay
- Manufacturer: VIKA
- for OE number: 4H0951253C
- Current Strength [A]: 30
- Voltage [V]: 12
- Number of pins: 5
- Relay function: Normally open contact
- Protection Type (IP Code): IP5K4
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 100
- Resistor [Ohm]: 16
- Manufacturer: BOSCH
- Name: BS 0332201107
- Pinge [V]: 12
- Nimivool [A]: 40
- Pistikkontaktide arv: 4
- Lüliti funktsioon: Lukustaja
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Pistikkontaktide arv: 4
- Pinge [V]: 12
- Voolutugevus (A): 70
- Relee funktsioon: Töökontakt
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 004 545 2905
- Current Strength [A]: 20
- Number of connectors: 5
- Relay function: Normally open contact
- Voltage [V]: 12
- Manufacturer: TRUCKTEC
- Relay Number: 373
- Voltage [V]: 12
- Capacity at 12V: 40A
- Combi Switch Function: Normally Open Contact
- Number of pins: 4
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 125
- Weight [g]: 24
- Inductive Load [A]: 15
- Capacitive Load [A]: 5
- Rated current [A]: 40
- Ohmic Load [A]: 40
- Quantity: 1
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 4RA933332451
Relay function: Comfort Equipment Variant (trim package), park distance control, ABS, Low Beam, High Beam, Heated rear window, ESP, Window Regulator, Starter, Klaxon, Air Conditioning, Light switch, Fan, heater/air conditioning, Interior Blower, Clamp 15, Daytime Running Light, Convertible Top Hydraulics, Central Locking, ABS recovery pump, Exterior Rearview Mirror Adjustment, Heatable exterior mirror, Electric booster heater, Interior Lighting, Clamp 15R, Clamp 87, Fuel Pump, Lambda Sensor, engine cooling, Front Fog Light, Windscreen wiper, Windscreen wiper rest heating, Sunroof, Secondary Air System, Seat Heating Brief Information: *** HELLA Electronics OE competence for over 60 years.
- General Information: relay
- Manufacturer: BORSEHUNG
- Voltage [V]: 12
- Weight [kg]: 0.025
- Number of connectors: 4
- Current Strength [A]: 30
- Supplementary Article/Supplementary Info: with holder
- General Information: relay
- Manufacturer: BORSEHUNG
- General Information: relay
- Manufacturer: BORSEHUNG
- General Information: relay
- Manufacturer: BORSEHUNG
- General Information: relay
- Manufacturer: BORSEHUNG
-
Relay function: Pre-
glow device, X contact relief - Rated Voltage [V]: 12
- Number of connectors: 4
- Current Strength [A]: 70
- Relay Number: 644
- General Information: relay
- Manufacturer: BORSEHUNG
- Lüliti funktsioon: Vahetaja
- Relee funktsioon: Töökontakt
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
for OE number: 8D0 951 253,
7M0 951 253 A - Block Separation:
- Combi Switch Function: without light dimmer function
- Current Strength [A]: 70
- Voltage [V]: 12
- Number of pins: 4
- Relay function: Normally open contact
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 125
- Supplementary Article/Supplementary Info: without holder
- Resistor [Ohm]: 90
- Manufacturer: BOSCH
- Relay Number: 395
- Voltage [V]: 12
-
Relay function: Terminal 30,
Clamp 87 - Rated current [A]: 40
- Weight [kg]: 0.03
- Fitting Position: Engine Compartment
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 2D0 959 145 A
- Current Strength [A]: 15
- Voltage [V]: 12
- Relay function: Normally open contact
- Manufacturer: BOSCH
- Voltage [V]: 12
- Weight [kg]: 0.01
- Number of connectors: 5
- General Information: relay
- Manufacturer: BORSEHUNG
- Corresponds to the original part in colour: grey
- for relay slot number: 1
- Relay Number: 614
- Voltage [V]: 12
- Capacity at 12V: 70A
- Combi Switch Function: Normally Open Contact
- Colour: black
- Number of pins: 4
- Wiring Diagramme: S2
- Supplementary Article/Info 2: with resistor
- Protection Type (IP Code): IP54
- Inductive Load [A]: 35
- Capacitive Load [A]: 30
- Ohmic Load [A]: 40
- Plug Type ID: B
- Supplementary Article/Supplementary Info: without holder
- for OE number: 13171831
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 4RA933332531
Relay function: Fuel Pump, Pre-glow device, Heated windscreen, Heated rear window, Fan, heater/air conditioning, Comfort Equipment Variant (trim package), engine cooling, Clamp 15, ESP, Clamp 15R, Secondary Air System, Air Suspension, Engine control unit, Hydraulic Unit, Clamp 87, Starter, ABS, ABS recovery pump Brief Information: *** HELLA Electronics OE competence for over 60 years.
- for OE number: 8E0 951 253
-
Combi Switch Function: On/
Off Switch - Current Strength [A]: 70
- Voltage [V]: 12
- Number of pins: 4
- Relay function: Normally open contact
- Housing Type: Housing with Plastic Lid
- Protection Type (IP Code): IP20
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 85
- Housing Colour: black
- Resistor [Ohm]: 63
- Length [mm]: 28
- Width [mm]: 28
- Height [mm]: 40
- Manufacturer: BOSCH
- for OE number: 8K0 951 253
- Current Strength [A]: 70
- Voltage [V]: 12
- Number of pins: 4
- Relay function: Normally open contact
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 85
- Manufacturer: BOSCH
-
Vehicle Identification Number (VIN) from: 8D-
X- 200 001 - Weight [kg]: 0.04
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 05.2003
- Voltage [V]: 12
-
Relay function: Central electrics,
Normally open contact -
Current Strength [A]: 10,
25 - Number of connectors: 5
- Relay Number: 219
- Number of used contacts: 5
- Weight [kg]: 0.036
- Fitting Position: Engine Compartment
- Manufacturer: VEMO
-
Lisainfo: V10-
71- 0001 VEM -
Additional information: V10-
71- 0001 VEM
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks