• Transmission Type: Manual Transmission
• Fitting Position: Front Axle, transmission sided
• Internal Toothing differential side, conn. to conn. shaft: 34
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, inner
• Additional information: CV joint kit, front, inner

• Transmission Type: Manual Transmission
• Length [mm]: 85
• Internal Toothing differential side, conn. to transmission: 34
• Name: KAITSEKUMMIKOMPLEKT, VEOVOLL
• Manufacturer: MAX
• Lisainfo: 49-1029
• Additional information: 49-1029

Fitting Position: Front Axle Left, Front Axle Right, transmission sided, Front Axle

• Transmission Type: Automatic Transmission, Manual Transmission
• Length [mm]: 31.8
• Internal Toothing differential side, conn. to transmission: 28
• for OE number: 701407331B
• Manufacturer: GSP

Fitting Position: Rear Axle Left, Rear Axle Right, transmission sided

• Fitting Position: Rear Axle Left, Rear Axle Right, Wheel Side
• Transmission Type: Automatic Transmission, Manual Transmission
• Length [mm]: 89
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Manufacturer: GSP

• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Length [mm]: 89
• Thread Size: M16x1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 59
• Number of Teeth, ABS ring: 45
• Diameter 1 [mm]: 88
• ABS-Ring Diameter [mm]: 81
• Outer Diameter 1 [mm]: 59.5
• Outer Diameter 2 [mm]: 88
• Manufacturer: BGA

• Vehicle Identification Number (VIN) from: 8E-4-195501
• Transmission Type: Automatic Transmission
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Length [mm]: 98
• Thread Size: M16x1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of Teeth, ABS ring: 45
• Diameter 1 [mm]: 98
• ABS-Ring Diameter [mm]: 81
• Outer Diameter 1 [mm]: 59.5
• Outer Diameter 2 [mm]: 98
• Manufacturer: BGA

• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Length [mm]: 97
• Thread Size: M16x1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 60
• Number of Teeth, ABS ring: 45
• Diameter 1 [mm]: 98
• ABS-Ring Diameter [mm]: 81
• Outer Diameter 1 [mm]: 59.5
• Outer Diameter 2 [mm]: 98
• Manufacturer: BGA

• Fitting Position: Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of Teeth, ABS ring: 45
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Wheel Side, Front Axle, transmission sided
• Number of Teeth, ABS ring: 45
• Thread Size: M16 x 1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Outer Diameter [mm]: 99.5
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: Manual Transmission
• Engine Code: AKE
• Length [mm]: 102
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• for OE number: 4D0407305B
• Technical Information Number: Non-Original design, Groove Type Inner
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: Automatic Transmission, Manual Transmission
• Version: Two
• Length [mm]: 97.5
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Technical Information Number: Original design
• Manufacturer: GSP

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: Manual Transmission
• Engine Code: BAU/BDH
• Length [mm]: 102
• Thread Size: M16X1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• for OE number: 8E0407305B
• Manufacturer: GSP

• Installatsiooni pool: esisild vasakul, esisild paremal
• Pikkus (mm): 102
• Keermemõõt: M16x1,5x77
• Välishambumine ratta pool: 38
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 59,5
• Hammastehulk ABS-rõngas: 45
• ABS rõnga läbimõõt [mm]: 81
• Piirangutega toode/piirangu info 2: koos kruviga
• Välisläbimõõt [mm]: 100
• Kaitsekummi materjal: TPE (termoplastiline elastomeer)
• Seerianumber: NPZ-AU-047
• Manufacturer: NTY

• Installatsiooni pool: Esisild, rattapool
• Keermemõõt: M16 x 1,5
• Välishambumine ratta pool: 38
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 59,5
• Hammastehulk ABS-rõngas: 45
• Välisläbimõõt [mm]: 99,5
• Manufacturer: JPN

• Engine Code: BAU, BDH
• Construction Year from: 01.2004
• Fitting Position: Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59
• Number of Teeth, ABS ring: 45
• Diameter 1 [mm]: 28
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Pikkus (mm): 102
• Keermemõõt: M16X1,5
• Välishambumine ratta pool: 38
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 59,5
• Hammastehulk ABS-rõngas: 45
• Manufacturer: JPN

• Transmission Type: Automatic Transmission, Manual Transmission
• Length [mm]: 32
• Internal Toothing differential side, conn. to transmission: 28
• for OE number: 7E0498103
• Technical Information Number: Original design, VL
• Manufacturer: GSP

Fitting Position: Rear Axle Left, Rear Axle Right, transmission sided

• Fitting Position: Wheel Side
• Number of Teeth, ABS ring: 45
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Length [mm]: 102
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Construction Year from: 01.2004
• Transmission Type: Manual Transmission
• Engine Code: BAU, BDH
• Fitting Position: Front Axle, Wheel Side
• Internal Toothing wheel side: 27
• External Toothing wheel side: 38
• Number of Teeth, ABS ring: 45
• Joint Type: CV Joint
• Lisainfo: CV joint kit, front, outer
• Additional information: CV joint kit, front, outer

• Fitting Position: Front Axle, Wheel Side
• Vehicle Identification Number (VIN) from: 8E...4...195501
• Transmission Type: Automatic Transmission
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Transmission Type: Automatic Transmission, Manual Transmission
• Pikkus (mm): 32
• Manufacturer: DRIVE

Fitting Position: Rear Axle Left, Rear Axle Right, transmission sided

• Engine Code: BAU, BDH
• Transmission Type: Manual Transmission
• Construction Year from: 01.2004
• Installatsiooni pool: rattapool
• Pikkus (mm): 98
• Välishambumine ratta pool: 38
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 59,5
• Hammastehulk ABS-rõngas: 45
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: transmission sided
• Outer Diameter [mm]: 108
• Internal Toothing differential side, conn. to conn. shaft: 28
• Manufacturer: LPR

• Installatsiooni pool: rattapool
• Hammastehulk ABS-rõngas: 45
• Välishambumine ratta pool: 38
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 59,5
• Pikkus (mm): 102
• Spetsifikatsioon: Groove type: MIDDLE
• Manufacturer: ASHIKA

• Vehicle Identification Number (VIN) to: 8E-4-195 500
• Engine Code: AKE, BAU
• Transmission Type: Automatic Transmission
• Fitting Position: Wheel Side, Front Axle
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Joint Type: CV Joint
• Drive Shaft: with ABS ring
• Length [mm]: 97.5
• Outer Diameter [mm]: 98
• Number of Teeth, ABS ring: 45
• Surface: Powder coated
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY

• Construction Year from: 01.2004
• Transmission Type: Automatic Transmission
• Engine Code: AKE/BAU
• Vehicle Identification Number (VIN) from: 8E4195501
• Fitting Position: Front Axle, Wheel Side
• External Toothing differential side: 27
• Internal Toothing wheel side: 27
• External Toothing wheel side: 38
• Number of Teeth, ABS ring: 45
• Manufacturer: JP GROUP
• Lisainfo: Joint Kit, drive shaft
• Additional information: Joint Kit, drive shaft

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle Right
• Length [mm]: 31.8
• Internal Toothing differential side, conn. to transmission: 28
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Rear Axle Left, Rear Axle Right, Wheel Side
• Transmission Type: Automatic Transmission, Manual Transmission
• Pikkus (mm): 89
• Keermemõõt: M16X1,5
• Välishambumine ratta pool: 38
• Sisehambumus rattapool: 33
• Rõngastihendi läbimõõt (mm): 59,5
• Manufacturer: DRIVE

• Transmission Type: Automatic Transmission
• Length [mm]: 82
• Internal Toothing differential side, conn. to transmission: 34
• Technical Information Number: AAR
• Manufacturer: GSP

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Construction Year to: 12.2003
• Vehicle Identification Number (VIN) to: 8E4195500
• Engine Code: AKE, BAU
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of Teeth, ABS ring: 45
• Supplementary Article/Info 2: with screw
• Thread Size: M16x1.5x72
• Bellows Material: TPE (thermoplastic elastomer)
• Length [mm]: 102
• ABS-Ring Diameter [mm]: 81
• Sealing Ring Diameter [mm]: 60
• Name: Liigendlaager, veovoll
• Manufacturer: MAX

Fitting Position: Wheel Side, Front Axle Left, Front Axle Right, Front Axle

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle Left, Front Axle Right, Front Axle
• Length [mm]: 96
• Internal Toothing differential side, conn. to transmission: 34
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• for PR number: T15, T1K, T5T, T79, T9J
• Fitting Position: transmission sided, Front Axle
• Weight [kg]: 2.228
• Internal Toothing differential side, conn. to transmission: 28
• Sealing Ring Diameter [mm]: 108
• Outer Diameter [mm]: 108
• Joint Type: Flexible Joint Disc
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Transmission Type: Manual Transmission
• Length [mm]: 82
• Internal Toothing differential side, conn. to transmission: 34
• for OE number: 1308629
• Technical Information Number: TJ, Non-Original design
• Manufacturer: GSP

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Length [mm]: 89
• External Toothing wheel side: 38
• Internal Toothing wheel side: 33
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Manufacturer: MAGNETI MARELLI
• Name: MM TOJ0037

• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Wheel Side, Front Axle
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 99.5
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP

• Engine Code: AKE, BAU, BDH
• Fitting Position: Rear Axle, transmission sided
• Joint Type: CV Joint
• Weight [kg]: 2.17
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: transmission sided
• Internal Toothing differential side, conn. to conn. shaft: 34
• Manufacturer: LPR
• Additional information: KAD865 LPR
• Lisainfo: KAD865 LPR

• Liigendtüüp: Tripodegelenk
• Sisehambumus rattapool: 34
• Pikkus (mm): 84
• Käigukasti liik: Käigukast 6 käiku
• Seerianumber: NPW-AU-001
• Manufacturer: NTY
• Name: NTY NPW-AU-001

Installatsiooni pool: Esisild, esisild vasakul, esisild paremal, kastipoolselt

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Length [mm]: 102
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Manufacturer: MAGNETI MARELLI
• Name: MM TOJ0038

• Vehicle Identification Number (VIN): [8E-4-000 001;]
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with rubber mount
• Sealing Ring Diameter [mm]: 59.5
• Thread Size: M16x1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of pins: 45
• Version: 6 balls
• Length 2 [mm]: 102
• Name: SN OJK54.021
• Manufacturer: SNR

• Transmission Type: Manual Transmission
• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Wheel Side, Front Axle
• Construction Year from: 01.2004
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.6
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 100
• Bellows Material: Rubber
• Manufacturer: METELLI PRZEGUBY POLOSIE

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: Automatic Transmission, Manual Transmission
• Pikkus (mm): 98
• Keermemõõt: M16X1,5
• Välishambumine ratta pool: 38
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 59,5
• Manufacturer: DRIVE

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Length [mm]: 97.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Name: MM TOJ0040
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: Manual Transmission
• Engine Code: BAU/BDH
• Pikkus (mm): 102
• Keermemõõt: M16X1,5
• Välishambumine ratta pool: 38
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 59,5
• Manufacturer: DRIVE

• Construction Year from: 01.2004
• Transmission Type: Automatic Transmission
• Engine Code: AKE/BAU
• Vehicle Identification Number (VIN) from: 8E4195501
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Length [mm]: 97.5
• External Toothing wheel side: 38
• Fitting Position: Wheel Side
• Weight [kg]: 2.73
• Name: PRZEGUB ZEWN¨TRZNY VW
• Manufacturer: VAI

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• New Part:
• Engine Code: BAU, BDH
• Block Separation:
• Vehicle Identification Number (VIN) from: 8E_4_195501
• Length [mm]: 85
• Joint Diameter [mm]: 88.5
• Internal Toothing differential side, conn. to conn. shaft: 34
• Net weight [kg]: 2.39
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: NK

Fitting Position: Front Axle Left, Front Axle Right, transmission sided Transmission Type: 6-Speed Manual Transmission, 5-Speed Automatic Transmission

• Transmission Type: Manual Transmission
• Sisehambumus diff.pool ühend.kastiga: 34
• pikkus [mm]: 85
• Quality class: PJ
• Name: Inner CV-joint

Fitting Position: transmission sided, Front Axle Right, Front Axle Left

• Supplementary Article/Info 2: with rubber mount
• Sealing Ring Diameter [mm]: 59.5
• Thread Size: M16x1,5
• External Toothing wheel side: 38
• Length 2 [mm]: 97.5
• Internal Toothing wheel side: 27
• Number of pins: 45
• Fitting Position: Wheel Side, Front Axle Left, Front Axle Right
• Name: SN OJK54.036
• Manufacturer: SNR

• Vehicle Identification Number (VIN): [;8E-1A014312], [;8E-6-805 000], [;8E-6-905 000]
• External Toothing differential side: 28
• Inner Diameter 2 [mm]: 108
• Length 2 [mm]: 31.8
• Name: SN IJK54.005
• Manufacturer: SNR

Fitting Position: Front Axle Left, transmission sided, Front Axle Right

• Engine Code: AKE, BAU, BDH
• Fitting Position: transmission sided, Rear Axle
• Length [mm]: 32
• Height [mm]: 32
• Bore Diameter [mm]: 10.5
• Internal Toothing differential side, conn. to conn. shaft: 28
• Number of bores: 6
• Outer Diameter [mm]: 108
• Number of Holes: 6
• Bolt Hole Circle Ø [mm]: 94
• Joint Type: Flexible Joint Disc
• Machined: with groove in inner part (inside)
• Manufacturer: SKF
• Name: SK VKJA8008

• Vehicle Identification Number (VIN): [8E-4-000001;], [8E-4-195 501;]
• Inner Diameter 2 [mm]: 124
• External Toothing differential side: 34
• Length 2 [mm]: 85
• Manufacturer: SNR /NTN-SNR/
• Name: SN IJK54.001

Fitting Position: Front Axle Left, transmission sided, Front Axle Right

• Vehicle Identification Number (VIN) to: 8E-4-195 500
• Engine Code: AKE, BAU
• Transmission Type: Fully Automatic
• Fitting Position: Front Axle, Wheel Side
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Machined: with groove in inner part (inside)
• Technical Information: Pre-greased joint
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Engine Code: BDH, BAU
• Transmission Type: Manual Transmission
• Fitting Position: transmission sided, Front Axle
• Length [mm]: 84
• Internal Toothing differential side, conn. to conn. shaft: 34
• Outer Diameter [mm]: 123
• Number of Holes: 6
• Joint Type: Tripod Joint
• Machined: with groove in inner part (inside)
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Engine Code: BAU, BDH
• Transmission Type: Manual Transmission
• Fitting Position: Front Axle, Wheel Side
• Thread Size: M16x1.5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Sealing Ring Diameter [mm]: 59.5
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 98
• Joint Type: CV Joint
• Machined: with groove in inner part (middle)
• Technical Information: Pre-greased joint
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Installatsiooni pool: Esisild, rattapool
• Välishambumine ratta pool: 38
• Sisehambumus rattapool: 27
• Välisläbimõõt [mm]: 98
• Hammastehulk ABS-rõngas: 45
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Installatsiooni pool: esisild vasakul, esisild paremal, rattapool
• Hammastehulk ABS-rõngas: 45
• Välishambumine ratta pool: 38
• Sisehambumus rattapool: 27
• Rõngastihendi läbimõõt (mm): 59,5
• Pikkus (mm): 102
• mehhaaniliselt töödeldud: auguga siseosal (keskel)
• Manufacturer: METZGER

• Transmission Type: Automatic Transmission
• for combined PR number: G0Q+D2H, G0Q+D7A, G0Q+MR1, G0Q+MW9
• Fitting Position: Front Axle, transmission sided
• Weight [kg]: 2.22
• Internal Toothing differential side, conn. to transmission: 34
• Sealing Ring Diameter [mm]: 100
• Outer Diameter [mm]: 85
• Joint Type: Tripod Joint
• Packaging length [cm]: 16.5
• Packaging width [cm]: 10
• Packaging height [cm]: 10
• Manufacturer: FEBEST

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Length [mm]: 82
• Internal Toothing differential side, conn. to transmission: 34
• Manufacturer: MAGNETI MARELLI

• Transmission Type: Manual Transmission
• Pikkus (mm): 82
• Manufacturer: DRIVE

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Transmission Type: 6-Speed Manual Transmission
• Engine Code: BAU, BDH
• Liigendtüüp: Kugelgleichlaufgelenk
• Välishambumine ratta pool: 38
• Sisehambumus rattapool: 27
• Hammastehulk ABS-rõngas: 45
• ABS rõnga läbimõõt [mm]: 81
• Rõngastihendi läbimõõt (mm): 60
• mehhaaniliselt töödeldud: auguga siseosal
• Liigendläbimõõt (mm): 100
• Pikkus (mm): 102
• Keermemõõt: M16x1.5x77
• Kaitsekummi materjal: TPE (termoplastiline elastomeer)
• Uus osa:
• Piirangutega toode/piirangu info 2: koos kruviga
• Piirangutega toode/piirangu info: määrdega
• Name: PRZEGUB ZEW. AUDI/SEAT 38X59,5X27 ABS 45Z
• Manufacturer: GKN

Tehniline informatsioon: Palun järgige liigendi täiendavaid tehnilisi spetsifikatsioone! Nõuab paindenurka, mis on suurem kui 50°!