Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 17.5
- Inner Diameter [mm]: 16
- Length [mm]: 31
- Width [mm]: 36
- Height [mm]: 40
- for OE number: 4B0511327
- Manufacturer: SASIC
- Stabiliser Diameter [mm]: 16
-
for PR number: 1BA,
1BR - Block Separation:
- Material: Rubber
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Width [mm]: 40
- Outer Diameter [mm]: 40
- Thickness [mm]: 36
- Length [mm]: 30
- Inner Diameter [mm]: 16
-
Name: Kinnitus,
stabilisaator - Manufacturer: MAX
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 19
- Inner Diameter [mm]: 17.5
- Length [mm]: 40
- Width [mm]: 30
- Height [mm]: 37
- for OE number: 8E0511327A
- Manufacturer: SASIC
- Mounting Type: Rubber Mount
-
Fitting Position: inner,
Rear Axle - Inner Diameter [mm]: 16
- Length [mm]: 30
- Required quantity: 2
- Weight [kg]: 0.105
-
Name: Kinnitus,
stabilisaator - Manufacturer: TED
- Suspension: for vehicles with sports suspension
- Stabiliser Diameter [mm]: 18
-
for PR number: 1BE,
1BV - Block Separation:
- Inner Diameter [mm]: 18
- Material: Rubber
- Observe service information:
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Name:
- Manufacturer: MAX
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 4D0 411 327 F
- Manufacturer: GSP ZAWIESZENIE
- Stabiliser Diameter [mm]: 16
-
for PR number: 1BA,
1BR - Block Separation:
- Length [mm]: 29.9
- Width [mm]: 40
- Thickness [mm]: 35.6
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 39.9
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.03
- Name:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 29
- Lisainfo: PAKENDIS 5 tk
- Additional information: PAKENDIS 5 tk
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 22
- Inner Diameter [mm]: 20.5
- Length [mm]: 45
- Width [mm]: 40
- Height [mm]: 40
- for OE number: 8E0511327D
- Manufacturer: SASIC
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 16
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW T. A4 01- 16MM - Manufacturer: MEY
- Stabiliser Diameter [mm]: 16
-
for PR number: 1BA,
1BR - Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Replace in pairs only:
- Shape: slotted
- Quantity per axle: 2
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Diameter 4 [mm]: 16
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 16
- Weight [kg]: 0.041
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year to: 12.2004
-
Fitting Position: Rear Axle,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 24
- Inner Diameter [mm]: 17.5
- Manufacturer: GATES
- Quantity per packing unit: 2
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 30.5
- Inner Diameter [mm]: 29
- Length [mm]: 51
- Width [mm]: 45
- Height [mm]: 53
- for OE number: 4D0411327J
- Manufacturer: SASIC
-
Engine Code: AKE,
BAU, BDH - Fitting Position: Rear Axle
- Suspension: for vehicles with comfort suspension
- Total Length [mm]: 29.8
- Outer Diameter [mm]: 39.8
- Inner Diameter [mm]: 16
- Manufacturer: CORTECO
- Weight [kg]: 0.045
-
Fitting Position: inner,
Front Axle - Mounting Type: Rubber Mount
- Required quantity: 2
- Inner Diameter [mm]: 29
- Length [mm]: 45
-
Name: Kinnitus,
stabilisaator - Manufacturer: TED
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 4D0 411 327 J
- Manufacturer: GSP
- Quantity per packing unit: 2
- Installatsiooni pool: Esisild
-
Kaal (kg): 0,
05 - Siseläbimõõt [mm]: 29
- Laagritüüp: Kummipuks
- Kaal (g): 50
- Manufacturer: METALCAUCHO
- for OE number: 4B0511327
- Fitting Position: Rear Axle
- Weight [g]: 34
- Manufacturer: IMPERGOM
- Installatsiooni pool: Tagasild
- Siseläbimõõt [mm]: 16
- Välisläbimõõt [mm]: 32
- Pikkus (mm): 30
- vajaminev tükihulk: 2
- Laagritüüp: Kummipuks
- Name: ALT 94626AL
- Manufacturer: ALTE AUTOMOTIVE
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 29
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles with sports suspension
- Stabiliser Diameter [mm]: 18
-
for PR number: 1BE,
1BV - Block Separation:
- Weight [kg]: 0.025
- Inner Diameter [mm]: 17
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Diameter 4 [mm]: 16
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Välisläbimõõt [mm]: 32
- Siseläbimõõt [mm]: 16
- Kõrgus (mm): 36
- pikkus [mm]: 30
- Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A4 01-
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A4 01-
(kvaliteediklass: PJ)"
-
Engine Code: AKE,
BAU, BDH - Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Total Length [mm]: 29.8
- Outer Diameter [mm]: 39.8
- Inner Diameter [mm]: 17.5
- Name: COC 49371775
- Manufacturer: CORTECO
- Suspension: for vehicles with sports suspension
- Stabiliser Diameter [mm]: 18
-
for PR number: 1BE,
1BV - Block Separation:
- Inner Diameter [mm]: 17
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.025
-
Name: Paigutus -
Kndmik VW T. A4 00- / EXEO 08- 18MM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 17
- Stabiliser Diameter [mm]: 18
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW T. A4 00- / EXEO 08- 18MM - Manufacturer: MEY
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 29
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. PASSAT/ A4/ A6 - Manufacturer: MEY
- Lisainfo: 1004110046
- Additional information: 1004110046
- Inner Diameter [mm]: 29
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.05
-
Name: Paigutus -
Kndmik VW P. PASSAT/ A4/ A6 - Manufacturer: FEB
- Additional information: FE23046
- Lisainfo: FE23046
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 12.2004
- Quality: OE Performance
- Material: Rubber
- Fitting Position: Front
- Colour: black
- Weight [g]: 49
- Inner Diameter [mm]: 29
- Manufacturer: GATES
- Fitting Position: Front Axle
- Total Length [mm]: 44
- Outer Diameter [mm]: 50
- Inner Diameter [mm]: 29
- Name: COC 80004686
- Manufacturer: CORTECO
-
Fitting Position: Rear,
inner, Left, Right -
for PR number: 1BA,
1BR - Quantity per packing unit: 2
- Inner Diameter 1 [mm]: 16
- Thickness 1 [mm]: 30
- Manufacturer: DELPHI
- Name: DE TD972W
-
Fitting Position: Front Axle Left,
Front Axle Right, inner - Siseläbimõõt [mm]: 29
- Välisläbimõõt [mm]: 53
- Pikkus (mm): 45
- paaris tootenumbrid: 270706
-
Kaal (kg): 0,
05 -
Montaažiinfo: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
- Suspension: for vehicles with sports suspension
- Stabiliser Diameter [mm]: 18
-
for PR number: 1BE,
1BV - Block Separation:
- Inner Diameter [mm]: 17
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.025
- Name: SW 30 93 9817
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 29.2
- SVHC: No SVHC present!
- Name: LU 819024910
- Manufacturer: FAG
- Fitting Position: Front Axle both sides
- Required quantity: 2
-
Inner Diameter [mm]: 29,
29.2 - paired article number: VKDS 351027
- Length [mm]: 53.2
- Height [mm]: 50.4
- Manufacturer: SKF
- Name: SK VKDS351027
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Siseläbimõõt [mm]: 29
- Laagritüüp: Kummipuks
- Name: Stabilizer mount left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A4/A6
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A4/A6
(kvaliteediklass: PJ)"
- Inner Diameter [mm]: 29
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.05
- Name: SW 32 92 3046
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for PR number: 1BD
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 22
- Required quantity: 2
-
Name: Paigutus -
Kndmik AUDI T. A4 00- 08 - Manufacturer: MEY
- Fitting Position: Rear Axle both sides
- Required quantity: 2
- Inner Diameter [mm]: 16
- paired article number: VKDS 451021
- Name: SK VKDS451021
- Manufacturer: SKF
- Construction Year to: 12.2004
-
Fitting Position: Front,
both sides - Quality: OE Performance
- Operating Mode: Manual
- Colour: silver
- Weight [g]: 89
- Manufacturer: GATES
- Installatsiooni pool: esisild mõlemapoolselt
- Üldine informatsioon: rubber bush
- Manufacturer: VIKA
- Length [mm]: 100
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.08
-
Name: Kinnitus,
stabilisaatoripaigutus - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 29
-
Name: Paigutus -
Kndmik VW P. PASSAT/ A4/ A6 00- 29MM - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Inner Diameter [mm]: 29
-
Supplementary Article/Info 2: with clamps,
with nut - Required quantity: 1
-
Name: Remondikomplekt,
stabilisaatorilaager - Manufacturer: MEY
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks