Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 17.5
- Inner Diameter [mm]: 16
- Length [mm]: 31
- Width [mm]: 36
- Height [mm]: 40
- for OE number: 4B0511327
- Manufacturer: SASIC
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 19
- Inner Diameter [mm]: 17.5
- Length [mm]: 40
- Width [mm]: 30
- Height [mm]: 37
- for OE number: 8E0511327A
- Manufacturer: SASIC
-
Fitting Position: inner,
Rear Axle - Mounting Type: Rubber Mount
- Required quantity: 2
- Length [mm]: 30
- Weight [kg]: 0.105
- Inner Diameter [mm]: 16
- Length from [mm]: 30
-
Name: Kinnitus,
stabilisaator - Manufacturer: TED
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 4D0 411 327 F
- Manufacturer: GSP ZAWIESZENIE
- Engine Code: ASN
- Stabiliser Diameter [mm]: 16
-
for PR number: 1BA,
1BR - Block Separation:
- Length [mm]: 29.9
- Width [mm]: 39.9
- Thickness [mm]: 35.6
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 39.9
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.03
- Name:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 22
- Inner Diameter [mm]: 20.5
- Length [mm]: 45
- Width [mm]: 40
- Height [mm]: 40
- for OE number: 8E0511327D
- Manufacturer: SASIC
- Stabiliser Diameter [mm]: 16
-
for PR number: 1BA,
1BR - Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Replace in pairs only:
- Shape: slotted
- Quantity per axle: 2
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Installatsiooni pool: esisild mõlemapoolselt
- Siseläbimõõt [mm]: 29
- Manufacturer: MERTZ
- Fitting Position: Rear Axle
- Mounting Type: Rubber Mount
- Colour: black
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 32
- Width [mm]: 30
- for OE number: 4B0511327
- Manufacturer: DELLO AUTOMEGA
- Engine Code: ASN
- Stabiliser Diameter [mm]: 16
-
for PR number: 1BA,
1BR - Block Separation:
- Material: Rubber
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Width [mm]: 40
- Outer Diameter [mm]: 40
- Thickness [mm]: 36
- Length [mm]: 30
- Inner Diameter [mm]: 16
-
Name: Kinnitus,
stabilisaator - Manufacturer: MAX
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 29
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 5 tk
- Additional information: PAKENDIS 5 tk
- Quantity per packing unit: 2
-
Fitting Position: Front Axle,
inner - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 30.5
- Inner Diameter [mm]: 29
- Length [mm]: 51
- Width [mm]: 45
- Height [mm]: 53
- for OE number: 4D0411327J
- Manufacturer: SASIC
- Construction Year to: 10.2004
-
Fitting Position: Rear Axle,
Rear - Quality: OE Performance
- Material: Rubber
- Colour: black
- Weight [g]: 24
- Inner Diameter [mm]: 17.5
- Manufacturer: GATES
- Diameter 4 [mm]: 16
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Inner Diameter [mm]: 16
- Weight [kg]: 0.041
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle Left,
Front Axle Right - for OE number: 4D0 411 327 J
- Manufacturer: GSP
- Weight [kg]: 0.07
- Required quantity: 2
- Inner Diameter [mm]: 25
- Length [mm]: 43.5
- Length from [mm]: 43.5
-
Fitting Position: inner,
Front Axle - Mounting Type: Rubber Mount
- Name: TG 00729539
- Manufacturer: TEDGUM
- Installatsiooni pool: Tagasild
- Siseläbimõõt [mm]: 16
- Välisläbimõõt [mm]: 32
- Pikkus (mm): 30
- vajaminev tükihulk: 2
- Laagritüüp: Kummipuks
- Name: ALT 94626AL
- Manufacturer: ALTE AUTOMOTIVE
- for OE number: 4B0511327
- Fitting Position: Rear Axle
- Weight [g]: 34
- Manufacturer: IMPERGOM
- Length [mm]: 45
- Inner Diameter [mm]: 29
- Mounting Type: Rubber Mount
-
Fitting Position: Front Axle,
inner - Required quantity: 2
- Length from [mm]: 45
- Weight [kg]: 0.045
-
Name: Kinnitus,
stabilisaator - Manufacturer: TED
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 16
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW T. A4 01- 16MM - Manufacturer: MEY
- Quantity per packing unit: 2
-
Fitting Position: Front Axle Left,
Front Axle Right - Mounting Type: Rubber Mount
- Stabiliser Diameter [mm]: 29
- Replace in pairs only:
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: ASN
- Suspension: for vehicles with sports suspension
- Stabiliser Diameter [mm]: 18
-
for PR number: 1BE,
1BV - Block Separation:
- Weight [kg]: 0.025
- Inner Diameter [mm]: 17
- Fitting Position: Rear Axle both sides
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: ASN,
AVK - Fitting Position: Rear Axle
- Suspension: for vehicles with comfort suspension
- Total Length [mm]: 29.8
- Inner Diameter [mm]: 16
- Outer Diameter [mm]: 39.8
- Manufacturer: CORTECO
- Name: COC 49371838
-
Engine Code: ASN,
AVK - Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Total Length [mm]: 29.8
- Inner Diameter [mm]: 17.5
- Outer Diameter [mm]: 39.8
- Name: COC 49371775
- Manufacturer: CORTECO
- Engine Code: ASN
- Suspension: for vehicles with sports suspension
- Stabiliser Diameter [mm]: 18
-
for PR number: 1BE,
1BV - Block Separation:
- Inner Diameter [mm]: 17
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.025
-
Name: Paigutus -
Kndmik VW T. A4 00- / EXEO 08- 18MM - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: ASN
- Suspension: for vehicles with sports suspension
- Stabiliser Diameter [mm]: 18
-
for PR number: 1BE,
1BV - Block Separation:
- Inner Diameter [mm]: 18
- Material: Rubber
- Observe service information:
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Name:
- Manufacturer: MAX
- Inner Diameter [mm]: 29
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.05
-
Name: Paigutus -
Kndmik VW P. PASSAT/ A4/ A6 - Manufacturer: FEB
- Additional information: FE23046
- Lisainfo: FE23046
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 10.2004
- Quality: OE Performance
- Material: Rubber
- Fitting Position: Front
- Colour: black
- Weight [g]: 49
- Inner Diameter [mm]: 29
- Manufacturer: GATES
- Engine Code: ASN
- Suspension: for vehicles with sports suspension
- Stabiliser Diameter [mm]: 18
-
for PR number: 1BE,
1BV - Block Separation:
- Inner Diameter [mm]: 17
- Material: Rubber
- Fitting Position: Rear Axle
- Weight [kg]: 0.025
- Name: SW 30 93 9817
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Right,
Left, Front Axle - Total Length [mm]: 44
- Inner Diameter [mm]: 29
- Outer Diameter [mm]: 50
- Name: COC 80004686
- Manufacturer: CORTECO
- Fitting Position: Front Axle
- Mounting Type: Rubber Mount
- Inner Diameter [mm]: 29.2
- SVHC: No SVHC present!
- Name: LU 819024910
- Manufacturer: FAG
- Inner Diameter [mm]: 29
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.05
- Name: SW 32 92 3046
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle both sides
- Required quantity: 2
-
Inner Diameter [mm]: 29,
29.2 - paired article number: VKDS 351027
- Length [mm]: 53.2
- Height [mm]: 50.4
- Name: SK VKDS351027
- Manufacturer: SKF
- Fitting Position: Rear Axle both sides
- Required quantity: 2
- Inner Diameter [mm]: 16
- paired article number: VKDS 451021
- Name: SK VKDS451021
- Manufacturer: SKF
- Construction Year to: 10.2004
-
Fitting Position: Front,
both sides - Quality: OE Performance
- Operating Mode: Manual
- Colour: silver
- Weight [g]: 89
- Manufacturer: GATES
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 17
- Stabiliser Diameter [mm]: 18
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW T. A4 00- / EXEO 08- 18MM - Manufacturer: MEY
- Installatsiooni pool: esisild mõlemapoolselt
- Üldine informatsioon: rubber bush
- Manufacturer: VIKA
- Length [mm]: 100
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.08
-
Name: Kinnitus,
stabilisaatoripaigutus - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 29
- Required quantity: 2
-
Name: Paigutus -
Kndmik VW P. PASSAT/ A4/ A6 - Manufacturer: MEY
- Lisainfo: 1004110046
- Additional information: 1004110046
- for PR number: 1BD
-
Fitting Position: Rear Axle Right,
Rear Axle Left - Inner Diameter [mm]: 22
- Required quantity: 2
-
Name: Paigutus -
Kndmik AUDI T. A4 00- 08 - Manufacturer: MEY
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter [mm]: 29
-
Name: Paigutus -
Kndmik VW P. PASSAT/ A4/ A6 00- 29MM - Manufacturer: LMI
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks