• Lambda andur: Sond, Keere eelmääritud
• Ülekandeliinide arv: 4
• Installatsiooni pool: katalüsaatori ees
• Seerianumber: ESL-AU-011
• Manufacturer: NTY
• Name: NTY ESL-AU-011

• Lambda andur: Diagnoosisond, Keere eelmääritud
• Seerianumber: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fitting Position: Left
• Manufacturer Restriction: VAG
• Number of pins: 5
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: Gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, EGR-klapp
• Manufacturer: HBE

• Lambda andur: soojendatud
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Pistikkontaktide arv: 4
• pikkus üle kõige (mm): 750
• Üldine informatsioon: lambda probe; 4 wire
• Manufacturer: VIKA

• Engine Code: ASN
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: Left, Right, after catalytic converter
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Quantity: 2
• Engine Code: ASN
• Cable Length [mm]: 1,530
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 1 750
• Ülekandeliinide arv: 4
• Manufacturer: ERA

• Fitting Position: Left, Right
• Engine Code: ASN
• Lambda Sensor: Unheated
• Number of pins: 4
• Cable Length [mm]: 1,050
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Length [mm]: 1,731
• Number of circuits: 4
• Conductor Number: 4
• Resistor [Ohm]: 9
• Cable Length [mm]: 1,731
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: ASN
• Length [mm]: 510
• Number of pins: 5
• Lambda Sensor: Regulating Probe
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Engine Code: ASN
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left, Right
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: Left Front, Right Front, after catalytic converter
• Quantity: 2
• Engine Code: ASN
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.156
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: after catalytic converter
• Cable Length [mm]: 954
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20169-12B1

• Engine Code: AVK
• Construction Year to: 06.2002
• Fitting Position: Left
• Transmission Type: Automatic Transmission
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Quantity: 2
• Engine Code: ASN
• Cable Length [mm]: 1,200
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"

• Engine Code: AVK
• Construction Year to: 06.2002
• Fitting Position: Left, after catalytic converter, Right
• Block Separation:
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Connector Shape: D Shape
• Weight [kg]: 0.138
• Length [mm]: 700
• for OE number: 030 906 262 L
• Thread Size: M18 x 1,5
• Cable Length [mm]: 700
• Number of circuits: 4
• Exhaust System: before catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fitting Position: Left, after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 1,800
• Number of pins: 4
• Recommended change interval [km]: 160,000
• Weight [kg]: 0.166
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ASN
• Construction Year to: 05.2004
• Fitting Position: Right, Left, after catalytic converter
• Block Separation:
• Lambda Sensor: Diagnostic Probe, Heated
• Number of circuits: 4
• Overall Length [mm]: 1,760
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: ASN, AVK
• Lambda Sensor: Diagnostic Probe, Heated
• Block Separation:
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,760
• Weight [kg]: 0.155
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AVK
• Construction Year to: 06.2002
• Fitting Position: Left
• Transmission Type: Automatic Transmission
• for OE number: 06C906265
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 800
• Number of pins: 4
• Weight [g]: 115
• Gross Weight [g]: 148
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Planar probe
• Required quantity: 2
• Engine Code: ASN
• Cable Length [mm]: 750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066401

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: ASN
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter, Left, Right
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 1,760
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: Left, after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Length [mm]: 800
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Lambda Sensor: Heated
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Number of pins: 4
• Overall Length [mm]: 750
• General Information: lambda probe
• Manufacturer: BORSEHUNG

• Lambda Sensor: Regulating Probe
• Length [mm]: 1,700
• Supplementary Article/Info 2: with mounting manual
• Number of pins: 4
• Manufacturer: FAE

• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Required quantity: 2
• Engine Code: ASN
• Cable Length [mm]: 1,750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066391

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda andur: soojendatud
• Pistikkontaktide arv: 4
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: ASN
• Required quantity: 2
• Number of pins: 4
• Cable Length [mm]: 1,800
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Manufacturer: VALEO

Lambda Sensor: Diagnostic Probe, Planar probe, Thread pre-greased, Heated Fitting Position: before catalytic converter, after catalytic converter

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 800
• Number of pins: 6
• Manufacturer: FAE ELEKTRYKA
• Additional information: 75357 FAE
• Lisainfo: 75357 FAE

• Quantity: 2
• Vehicle Identification Number (VIN) from: 8E-3-000 001
• Vehicle Identification Number (VIN) to: 8E-2-400 000
• Lambda andur: soojendatud
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Pistikkontaktide arv: 4
• pikkus üle kõige (mm): 1 760
• Üldine informatsioon: lambda probe; 4 wire
• Manufacturer: VIKA

• Lambda andur: Bistabiilne andur
• Kaablipikkus (mm): 775
• Pistikkontaktide arv: 6
• Manufacturer: ERA

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Värv: punane
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV905

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 420
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV870
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Lambda Sensor, Heated
• Engine Code: ASN, AVK
• Cable Length [mm]: 950
• Manufacturer: DELPHI
• Name: DE ES10921-12B1

• Lambda andur: soojendatud
• Ühendushulk: 5
• Üldine informatsioon: lambda probe; 5 wire
• Manufacturer: VIKA

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 1 070
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,2
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV851

• Fitting Position: Left, Right
• Lambda Sensor: Regulating Probe, Heated
• Cable Length [mm]: 900
• Number of pins: 6, 5
• Name: Lambda andur
• Manufacturer: MAX

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 400
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV871
• Manufacturer: ESEN SKV

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 520
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,15
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV868
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 630
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 5
• Kaal (kg): 0,16
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV858
• Manufacturer: ESEN SKV

• Lambda Sensor: Regulating Probe, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 5
• Cable Length [mm]: 600
• for OE number: 1K0 998 262 H
• for article number: 81528E
• Quality: OE EQUIVALENT
• Manufacturer: MEAT & DORIA

• Engine Code: AVK
• Construction Year to: 05.2004
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 5
• Overall Length [mm]: 750
• Recommended change interval [km]: 250,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Broadband lambda sensor
• Required quantity: 2
• Engine Code: ASN
• Cable Length [mm]: 800
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Lambda andur
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Kaal (kg): 0,14
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV908
• Manufacturer: ESEN SKV

• Lambda andur: Bistabiilne andur
• Garantii: 3 aastat garantii
• Kaal (kg): 0,15
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Tehniline informatsioon: Universal
• Manufacturer: ESEN SKV

• Engine Code: ASN, AVK
• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Fitting Position: Left Front, Right Front
• Quantity: 2
• Length [mm]: 850
• Number of connectors: 5
• Manufacturer: VERNET

• Vehicle Identification Number (VIN) from: 8E-1-000 001
• Vehicle Identification Number (VIN) to: _8E-5-400 000
• Engine Code: AVK, ASN
• Fitting Position: before catalytic converter
• Block Separation:
• Lambda Sensor: Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 800
• Manufacturer: PIERBURG

• Fitting Position: Left, Right
• Lambda Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 900
• Manufacturer: PIERBURG

• Lambda Sensor: Unheated
• Number of pins: 5
• Cable Length [mm]: 600
• for article number: 81528
• Manufacturer: MEAT&DORIA

• Fitting Position: Left, Right, Front, before catalytic converter
• Required quantity: 2
• Engine Code: ASN, AVK
• Lambda Sensor: Regulating Probe
• Cable Length [mm]: 800
• Number of pins: 6
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6PA009166831
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.