• Fitting Position: Front Axle both sides
• Number of Teeth: 45
• Width [mm]: 11
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 81
• Fabrication Number: NZA-AU-001
• Manufacturer: NTY
• Name: NTY NZA-AU-001
• Lisainfo: 45 T 81 MM / 77 MM / 11 MM
• Additional information: 45 T 81 MM / 77 MM / 11 MM

• Fitting Position: Front Axle
• Number of Teeth: 45
• Inner Diameter [mm]: 77
• Thickness [mm]: 11
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Laius (mm): 11
• Hammastehulk: 45
• Välisläbimõõt [mm]: 81
• Siseläbimõõt [mm]: 77
• Name: ANDUR,ABS
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Number of Teeth: 45
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 81
• Width [mm]: 11
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Siseläbimõõt [mm]: 76,8
• Laius (mm): 11
• Välisläbimõõt [mm]: 80,7
• Hammastehulk ABS-rõngas: 45
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: VAG
• Additional information: VAG

• Fitting Position: Rear Axle both sides, Rear Axle
• Block Separation:
• Siseläbimõõt [mm]: 67
• Laius (mm): 11
• Hammastehulk: 45
• Välisläbimõõt [mm]: 107
• Name: ANDUR,ABS
• Manufacturer: MAX
• Lisainfo: 109114015
• Additional information: 109114015

• Fitting Position: Rear Axle both sides, Rear Axle
• Block Separation:
• Siseläbimõõt [mm]: 67
• Laius (mm): 11
• Välisläbimõõt [mm]: 106,8
• Hammastehulk ABS-rõngas: 45
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: AUDI
• Additional information: AUDI

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-003
• Manufacturer: NTY

• Cable Length [mm]: 1,035
• Sensor Type: Passive sensor
• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-004

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-AU-002
• Manufacturer: NTY
• Name: NTY HCA-AU-002

• Construction Year from: 06.2003
• Construction Year to: 05.2004
• Vehicle Identification Number (VIN) from: 8E..4..000 001
• Installatsiooni pool: Esisild
• Kaablipikkus (mm): 990
• Anduritüüp: passiivne andur
• OE-numbri jaoks: 8E0927803B
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 06.2003
• Installatsiooni pool: Esisild
• Takistus [oom]: 1 700
• OE-numbri jaoks: 8E0927803B
• Kinnitusaukude hulk: 1
• Name: MM MWSS029
• Manufacturer: MAGNETI MARELLI

• Construction Year to: 05.2004
• Installatsiooni pool: Tagasild paremal
• Kaablipikkus (mm): 1 330
• Takistus [oom]: 1 750
• Pistikkontaktide arv: 2
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS124

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Construction Year to: 05.2004
• Installatsiooni pool: Tagasild vasakul
• Anduritüüp: passiivne andur
• Manufacturer: KAMOKA

• Construction Year to: 05.2004
• Installatsiooni pool: Tagasild paremal
• Anduritüüp: Induktiivandur, passiivne andur
• pikkus üle kõige (mm): 1 370
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

Vehicle Equipment: for vehicles with headlight levelling (automatic), for vehicles with headlight levelling (mechanical)

• Anduritüüp: passiivne andur
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 957
• Installatsiooni pool: esisild paremal, esisild vasakul
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0086

• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Fitting Position: Front Axle both sides
• Number of connectors: 2
• Manufacturer: JPN

• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Installatsiooni pool: esisild vasakul, esisild paremal
• Anduritüüp: Induktiivandur
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,015
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Identification Number (VIN) from: 8E-1-000 001
• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Vehicle Equipment: for vehicles with dynamic bending light
• Anduritüüp: Hallsensor
• Manufacturer: JP GROUP
• Lisainfo: Sensor, wheel speed
• Additional information: Sensor, wheel speed

• Fitting Position: Rear Axle, Left, Right
• Vehicle Identification Number (VIN) to: 8E4400000
• for PR number: 8Q0, 8Q1, 8Q3
• Block Separation:
• Vehicle Equipment: for vehicles with Xenon light
• Colour: black
• Sensor Type: Passive sensor
• Length [mm]: 1,360
• Manufacturer: JPN

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,005
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,390
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Rear Axle
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV352
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle Right
• Pistikkontaktide arv: 2
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 330
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0096

• Vehicle Identification Number (VIN) to: 8E-3-350 000
• Installatsiooni pool: esisild vasakul, esisild paremal
• Anduritüüp: Induktiivandur
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Vehicle Identification Number (VIN) from: 8E_4_000001
• Fitting Position: Front Axle
• Manufacturer: DELLO AUTOMEGA

• Construction Year to: 05.2004
• Block Separation:
• Fitting Position: Rear Axle Right
• Installatsiooni pool: Tagasild
• Anduritüüp: Induktiivandur
• Piirangutega toode/piirangu info 2: koos kaabliga
• pikkus üle kõige (mm): 1 370
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

Vehicle Equipment: for vehicles with headlight levelling (automatic), for vehicles with headlight levelling (mechanical)

• Construction Year to: 05.2003
• Vehicle Identification Number (VIN) to: 8E..3..500 000
• Installatsiooni pool: Esisild
• Anduritüüp: passiivne andur
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 06.2003
• Installatsiooni pool: esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: koos kaabliga
• Pikkus (mm): 1 040
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle, Left
• Vehicle Identification Number (VIN) to: 8E4400000
• Vehicle Equipment: for vehicles with Xenon light
• for PR number: 8Q3
• Colour: black
• Sensor Type: Passive sensor
• Length [mm]: 1,300
• Manufacturer: JPN

• Vehicle Identification Number (VIN) from: 8E5000001
• for PR number: 8Q3
• Installatsiooni pool: Tagasild vasakul
• Anduritüüp: passiivne andur
• Pikkus (mm): 1 195
• Pistiku värv: must

• Vehicle Identification Number (VIN) to: 8E-4-400 000
• Installatsiooni pool: esisild paremal, Tagasild paremal
• Anduritüüp: Induktiivandur
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, rear, left/right
• Additional information: ABS sensor, rear, left/right

• Ühenduste arv: 2
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaablipikkus (mm): 1 370
• Kaal (kg): 0,135
• Name: SW 33 11 1267
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Construction Year to: 05.2004
• Installatsiooni pool: Esisild
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 050
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Construction Year to: 05.2004
• Installatsiooni pool: Esisild
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 050
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Construction Year to: 05.2003
• Installatsiooni pool: Esisild
• Takistus [oom]: 1 650
• OE-numbri jaoks: 8E0927803A
• Pistikkontaktide arv: 7
• Kinnitusaukude hulk: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS031

• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Fitting Position: Front Axle both sides
• Number of connectors: 4, 2
• Manufacturer: JPN

• Construction Year to: 05.2003
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 8E_1_000001
• Vehicle Identification Number (VIN) to: 8E_3_500000
• Fitting Position: Front Axle
• Manufacturer: DELLO AUTOMEGA

• Installatsiooni pool: Tagasild vasakul
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 1 307
• Anduritüüp: passiivne andur
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0241

• Installatsiooni pool: Esisild
• Anduritüüp: passiivne andur
• OE-numbri jaoks: 4B0927803E
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle Identification Number (VIN) to: 8E-4-400000
• Block Separation:
• Piirangutega toode/piirangu info 2: koos kaabliga, kummist lüüvers
• Pikkus (mm): 1 420
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Manufacturer: TOPRAN

Vehicle Equipment: for vehicles without headlight levelling (automatic), for vehicles with headlight levelling (automatic) Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 05.2004
• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with control unit for aut. LDR
• Installatsiooni pool: Tagasild vasakul
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle Identification Number (VIN) from: 8E-5-000001
• for PR number: 8Q0, 8Q1, 8Q3, 8Q5
• Block Separation:
• Piirangutega toode/piirangu info 2: koos kaabliga, kummist lüüvers
• Pikkus (mm): 1 450
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: HAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 05.2003
• Fitting Position: Front Axle
• Length [mm]: 980
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.16
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV026

• Fitting Position: Front Axle
• Length [mm]: 975
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV038

• Vehicle Identification Number (VIN) from: 8E-1-000001
• Fitting Position: Rear Axle
• Block Separation:
• Vehicle Equipment: for vehicles with dynamic bending light
• Required quantity: 1
• Installatsiooni pool: Tagasild paremal
• Anduritüüp: Hallsensor
• Kaablipikkus (mm): 1 360
• Pistikkontaktide arv: 2
• paaris tootenumbrid: 20-0337
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Fitting Position: Front Axle
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 4
• Kaablipikkus (mm): 1 035
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Fitting Position: Rear Axle Left, Rear Axle Right
• Anduritüüp: passiivne andur
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 1 372
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0030

• Vehicle Identification Number (VIN) from: 8E-5-000 001, 8E-5-000 0012
• Fitting Position: Rear Axle both sides, Rear Axle Right
• for PR number: 8Q0, 8Q1, 8Q3
• Block Separation:
• Cable Length [mm]: 1,365
• Number of connectors: 2
• Manufacturer: JPN

• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with Xenon light
• Vehicle Identification Number (VIN) to: 8E_4_400000
• for PR number: 8Q3
• Anduritüüp: Aktiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 1 370
• Name: DE SS21127-12B1
• Manufacturer: DELPHI

• Quantity: 1, 2
• Vehicle Identification Number (VIN) from: 8E-5-000 001
• Cable Length [mm]: 1,197
• Fitting Position: Rear Axle
• General Information: ABS speed sensor; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Overall Length [mm]: 1,050
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,000
• paired article number: 30010
• Weight [kg]: 0.13
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 8E5000001
• for PR number: 8Q0, 8Q1
• Overall Length [mm]: 1,440
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Weight [kg]: 0.2
• Cable Length [mm]: 1,370
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Overall Length [mm]: 1,050
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,000
• paired article number: 30009
• Weight [kg]: 0.13
• Manufacturer: A.B.S.

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with Xenon light
• Quantity: 1
• for PR number: 8Q3
• Vehicle Identification Number (VIN) from: 8E5000001
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 6
• Name: CZUJNIK ABS AUDI T. A4, S4 00- LE
• Manufacturer: DLP

• Construction Year to: 05.2004
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Anduritüüp: Induktiivandur
• Kaablipikkus (mm): 1 330
• Manufacturer: MEAT&DORIA

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 8E-4-000001>8E-5-400
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 4
• Kaablipikkus (mm): 1 035
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Vehicle Identification Number (VIN) from: 8E-1-000001
• Piirangutega toode/piirangu info 2: koos kaanega, ilma andurita
• Name: Paisupaak,pidurivedelik
• Manufacturer: MAX

• Fitting Position: Rear Axle Left
• Vehicle Identification Number (VIN) from: 8E-5-000001
• for PR number: 8Q3
• Piirangutega toode/piirangu info 2: koos kaabliga, koos murdekaitsega, kummist lüüvers
• Anduritüüp: Induktiivandur
• Pikkus 1 [mm]: 925
• Pikkus 2 [mm]: 1 355
• pikkus üle kõige (mm): 1 445
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Pistikukatte kuju: ovaalne
• Sõidukivarustus: tulekaugusregulaatoriga sõidukitele e(automaatne)
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year from: 06.2003
• Anduritüüp: Induktiivandur
• Installatsiooni sügavus (mm): 28
• OE-numbri jaoks: 8E0 927 803 B
• Installatsiooni pool: esisild paremal, esisild vasakul
• pikkus üle kõige (mm): 980
• Pikkus (mm): 380
• Manufacturer: MEAT&DORIA

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) to: 8E4400000
• for PR number: 8Q0, 8Q1
• Overall Length [mm]: 1,400
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 1,330
• paired article number: 30831
• Weight [kg]: 0.2
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) to: 8E_3_500 000
• Kaablipikkus (mm): 975
• Installatsiooni sügavus (mm): 28,1
• Pistikkontaktide arv: 4
• Nominaaltakistus [oom]: 2 300
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Vehicle Identification Number (VIN) to: 8E-4-400 000
• Required quantity: 1
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Name: CZUJNIK ABS AUDI T. A4 00- LE/PR
• Manufacturer: BRM

• Vehicle Identification Number (VIN) from: 8E-5-000 001
• Required quantity: 1
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Name: CZUJNIK ABS VW T. A4 PR 02-
• Manufacturer: BRM

• for PR number: 8Q0, 8Q1, 8Q3, 8Q5
• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Nominaalpinge (V): 12
• Takistus [oom]: 1 650
• Kaablipikkus (mm): 1 360
• Anduritüüp: Hallsensor, passiivne andur
• Pistikkontaktide arv: 2
• Kaal (kg): 0,138
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle, Rear Axle Right
• Vehicle Identification Number (VIN) to: 8E_4_400000
• for PR number: 8Q0, 8Q1, 8Q3
• Block Separation:
• Vehicle Equipment: for vehicles with Xenon light
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 1 370
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP
• Quality class: PJ

• Vehicle Identification Number (VIN) from: 8E-4-000 001
• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Name: CZUJNIK ABS VW P. A4 02- LE/PR 1050MM
• Manufacturer: BRM

• Vehicle Identification Number (VIN) to: 8E-3-500 000
• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Construction Year to: 05.2004
• Fitting Position: Rear Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 8E_5_000001
• for PR number: 8Q0, 8Q1
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaablipikkus (mm): 1 370
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6PU012806891
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.