Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Üldine informatsioon: pressure sensor
- Manufacturer: VIKA
- General Information: fuel pressure regulator
- Manufacturer: BORSEHUNG
- Lambda andur: soojendatud
- Soovituslik vahetusintervall (km): 160 000
- Ühendus/klemm: vajadusel kohandada pistikühendus
- Pistikkontaktide arv: 4
- pikkus üle kõige (mm): 750
- Üldine informatsioon: lambda probe; 4 wire
- Manufacturer: VIKA
-
Fitting Position: Right,
after catalytic converter - Cable Length [mm]: 909
-
Lambda Sensor: Planar probe,
Heated - Manufacturer: DELPHI
-
Name: DE ES20178-
12B1
- Lambda Sensor: Diagnostic Probe
- Exhaust System: after catalytic converter
-
Fitting Position: Left Front,
Right Front - Quantity: 2
-
Length [mm]: 1,
020 - Number of connectors: 4
- Manufacturer: VERNET
- Lambda andur: Bistabiilne andur
- Kaablipikkus (mm): 1 750
- Ülekandeliinide arv: 4
- Manufacturer: ERA
-
Lambda Sensor: Diagnostic Probe,
Unheated - Fitting Position: Right
- Number of pins: 4
-
Cable Length [mm]: 1,
050 - Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
-
Length [mm]: 1,
731 - Number of circuits: 4
- Conductor Number: 4
- Resistor [Ohm]: 9
-
Cable Length [mm]: 1,
731 - Lambda Sensor: Heated
- Manufacturer: MAGNETI MARELLI
- Name: MM OSM007
- Lambda Sensor: Diagnostic Probe
-
Fitting Position: after catalytic converter,
Left, Right - Block Separation:
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Name: BS 0258986615
- Construction Year from: 03.2003
-
Fitting Position: Right,
after catalytic converter - Corresponds to the original part in colour: black
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Left
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
- Name: Lambda sensor
- Quality class: Q
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
- Construction Year from: 11.2002
- Number of pins: 5
-
Overall Length [mm]: 1,
510 - Lambda Sensor: Regulating Probe
- Manufacturer: JP GROUP
- Lisainfo: Lambda Sensor
- Additional information: Lambda Sensor
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fitting Position: Left,
after catalytic converter -
Line insulation design: with silicone-
coated woven- fibre insulation -
Overall Length [mm]: 1,
800 - Number of pins: 4
-
Recommended change interval [km]: 160,
000 - Weight [kg]: 0.166
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Üldine informatsioon: Exhaust Gas Temperature Sensor
- Manufacturer: VIKA
-
Lambda Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
-
Cable Length [mm]: 1,
760 - Weight [kg]: 0.155
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Lambda Sensor: Regulating Probe
-
Fitting Position: Left,
before catalytic converter - Number of pins: 6
-
Length [mm]: 1,
500 - Manufacturer: FAE
- Fitting Position: Left
-
for OE number: 077906265AD,
022906262AH - Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 950
- Number of pins: 4
- Weight [g]: 127
- Gross Weight [g]: 160
- Manufacturer: DENSO
- Name: Lambda sensor
- Quality class: Q
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
PASSAT (3B3), 11.00-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
PASSAT (3B3), 11.00-
(kvaliteediklass: Q)"
- Construction Year from: 11.2002
- Transmission Type: Automatic Transmission
- Fitting Position: Right
-
Line insulation design: with silicone-
coated woven- fibre insulation - Length [mm]: 730
- Connector Shape: D Shape
- Conductor Number: 4
- Cable Length [mm]: 600
-
Thread Size: M18 x 1,
5 - Housing Colour: black
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Version: ZR-
PLANAR - Exhaust System: after catalytic converter
- Weight [kg]: 0.158
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Lambda Sensor: Heated
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Number of pins: 4
- Overall Length [mm]: 750
- General Information: lambda probe
- Manufacturer: BORSEHUNG
- Lambda Sensor: Regulating Probe
-
Length [mm]: 1,
700 - Supplementary Article/Info 2: with mounting manual
- Number of pins: 4
- Manufacturer: FAE
-
Fitting Position: Left Front,
after catalytic converter -
Lambda Sensor: Diagnostic Probe,
Regulating Probe -
Cable Length [mm]: 1,
750 - Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PA358066391
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Lambda andur: soojendatud
- Pistikkontaktide arv: 4
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Number of pins: 4
-
Cable Length [mm]: 1,
800 -
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
Lambda Sensor: Diagnostic Probe, Planar probe, Thread pre-greased, Heated Fitting Position: before catalytic converter, after catalytic converter
-
Fitting Position: Right Front,
before catalytic converter - Rated Voltage [V]: 12
- Number of pins: 6
- Connector Shape: oval
-
Cable Length [mm]: 1,
510 -
Overall Length [mm]: 1,
538 - Spanner Size: 22
- Thread Size: M 18
- Thread Pitch [mm]: 1.5
- Supplementary Article/Supplementary Info: with cable tie
-
Supplementary Article/Info 2: with plastic socket,
with heat shield pipe - Lubrication: with grease lubrication
- Full Set:
- Manufacturer: TOPRAN
Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated, Planar probe General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity: 2
- Lambda andur: soojendatud
- Soovituslik vahetusintervall (km): 160 000
- Ühendus/klemm: vajadusel kohandada pistikühendus
- Pistikkontaktide arv: 4
- pikkus üle kõige (mm): 1 760
- Üldine informatsioon: lambda probe; 4 wire
- Manufacturer: VIKA
-
Length [mm]: 1,
510 - Conductor Number: 5
- Number of circuits: 5
-
Cable Length [mm]: 1,
510 - Lambda Sensor: Heated
- Manufacturer: MAGNETI MARELLI
- Name: MM OSM150
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Värv: punane
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
15 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
-
Lambda Sensor: Regulating Probe,
Lambda Sensor, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 950
- Manufacturer: DELPHI
-
Name: DE ES10921-
12B1
- Engine Code: BFL
-
Vehicle Identification Number (VIN) from: 4E-
3- 000 001 -
Fitting Position: Left,
Right -
Lambda Sensor: Diagnostic Probe,
Heated - Voltage [V]: 12
- Conductor Number: 4
- Cable Length [mm]: 950
- Manufacturer: PIERBURG
- Lambda andur: soojendatud
- Ühendushulk: 5
- Üldine informatsioon: lambda probe; 5 wire
- Manufacturer: VIKA
- Required quantity: 2
- Number of pins: 5
- Connector Shape: D Shape
-
Cable Length [mm]: 1,
360 - Fitting Position: Exhaust Manifold
- Lambda Sensor: Broadband lambda sensor
- for article number: 81519E
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Lambda Sensor: Regulating Probe
-
Fitting Position: before catalytic converter,
Left - Number of circuits: 5
-
Overall Length [mm]: 1,
510 -
Recommended change interval [km]: 250,
000 - Manufacturer: BOSCH
- Name: BS 0258007351
- Lambda andur: Bistabiilne andur
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
15 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Tehniline informatsioon: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV
- Fitting Position: before catalytic converter
- Lambda Sensor: Regulating Probe
-
Cable Length [mm]: 1,
500 - Number of pins: 6
- Exhaust System: before catalytic converter
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6PA009166821
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Lambda Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
16 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: ESEN SKV
- Required quantity: 2
- Number of pins: 4
- Connector Shape: D Shape
-
Cable Length [mm]: 1,
360 - Fitting Position: Exhaust Manifold
- Lambda Sensor: Broadband lambda sensor
- for article number: 81519
- Manufacturer: MEAT&DORIA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks