• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: dark grey
• Fitted Diameter [mm]: 25
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 20
• for OE number: 06A919501A
• Manufacturer: MEAT&DORIA

• Engine Code: BDX
• Colour: grey
• for article number: 26.0015K, 7.3278K, 7.7946
• Manufacturer: FACET

• Engine Code: BDX
• Colour: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Length [mm]: 20
• Colour Coding: grey
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA111

• for OE number: 03C 906 051 F
• Fabrication Number: ECM-VW-001
• Manufacturer: NTY

• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV488

• for OE number: 03C 906 051
• Manufacturer: TRUCKTEC AUTOMOTIVE

• Connector Shape: oval
• Supplementary Article/Info 2: without cable, with seal ring
• Sensor Type: Hall Sensor
• Number of pins: 3
• for OE number: 07L 905 163C, 958 606 106 01
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: ESS-AU-002
• Manufacturer: NTY

• Number of pins: 3
• Socket colour: black
• Fabrication Number: ESS-AU-004
• Manufacturer: NTY

• General Information: pressure sensor
• Manufacturer: VIKA

• Engine Code: BDX
• Supplementary Article/Info 2: without cable
• Number of pins: 3
• Voltage [V]: 12
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Number of pins: 4
• Name: ANDUR,OHUVOTU ROHK
• Manufacturer: MAX

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 4
• Manufacturer: JPN

• Quantity: 1
• Length [mm]: 570
• Number of pins: 3
• Colour Coding: grey
• General Information: knock sensor
• Manufacturer: VIKA

Manufacturer: MAGNETI MARELLI

• Pressure from [kPA]: 10
• Pressure to [kPA]: 11
• Number of pins: 4
• Supplementary Article/Info 2: without cable
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: EFP-AU-001
• Manufacturer: NTY

• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• for article number: 87470E
• Quality: OE EQUIVALENT
• for OE number: 07L905163A
• Manufacturer: MEAT&DORIA

• Alternatively:
• Number of pins: 4
• Alternative Repair Kit: 550570
• Manufacturer: ERA

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA VW GOLF 1,4 10-
• Manufacturer: BRM

• General Information: hall sender camshaft
• Manufacturer: VIKA

• General Information: pressure sensor
• Manufacturer: BORSEHUNG

• Measuring Range from [kPa]: 10
• Measuring Range to [kPa]: 115
• Measuring Range from [V]: 0.4
• Measuring Range to [V]: 4.65
• Number of connectors: 4
• Manufacturer: VERNET

• Height [mm]: 24
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Alternatively:
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Alternative Repair Kit: 550476
• Manufacturer: ERA

Manufacturer: MAGNETI MARELLI

• Engine Code: BDX
• Manufacturer: FACET

• Engine Code: BDX
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Name: Andur,Nukkvollipositsioon
• Manufacturer: DLP

• Number of pins: 4
• Pressure from [kPA]: 13
• Manufacturer: DELPHI
• Name: DE PS10135

• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• General Information: pressure sensor
• Manufacturer: VIKA

• Number of pins: 3
• Manufacturer: JPN

• Cable Length [mm]: 385
• Number of pins: 3
• Manufacturer: DELPHI

• Colour: grey
• Cable Length [mm]: 400
• Number of pins: 3
• Name: DE AS10233
• Manufacturer: DELPHI

• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe
• Fabrication Number: ESL-SK-004
• Cable Length [mm]: 545
• Manufacturer: NTY

• Colour Coding: green
• Length [mm]: 465
• Supplementary Article/Info 2: with cable
• Connector Shape: D Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Manufacturer: BOSCH

• Fabrication Number: EFP-AU-005
• Manufacturer: NTY
• Name: NTY EFP-AU-005

• Number of connectors: 4
• Weight [kg]: 0.235
• for OE number: 03C 906 051 F
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: Andur,ktuserohk
• Manufacturer: MAX

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: oval
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Connector Shape: oval
• Weight [kg]: 0.045
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BDX
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• Output Voltage, from [V]: 0.405
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Engine Code: BDX
• Pressure from [kPA]: 10
• Pressure to [kPA]: 117
• Output Voltage, from [V]: 0.405
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.090
• Manufacturer: EPS

• Fitting Position: Intake Manifold
• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Manufacturer: VDO

• Number of connectors: 4
• Weight [kg]: 0.235
• for OE number: 03C 906 051 F
• Name: SW 30 94 5079
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Manufacturer: NRF

• General Information: camshaft position sensor
• Manufacturer: BORSEHUNG

• Mounting Type: Bolted
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of pins: 3
• Sensor Type: Impulse Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU013122191

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: BDX
• Housing Colour: green
• Length [mm]: 500
• Manufacturer: FACET

• Manufacturer Restriction: Niederdrucksensor
• Pressure [bar]: 11
• Fuel Mixture Formation: Direct Injection
• Number of pins: 3
• Guarantee: 3 years guarantee
• Version: AM
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV622
• Manufacturer: ESEN SKV

• Supplementary Article/Info 2: High Pressure Side
• Fuel Mixture Formation: Direct Injection
• Name: ANDUR,KšTUSEROHK
• Manufacturer: BOS

• External Thread Size: M10 x 1
• Number of connectors: 3
• Supplementary Article/Info 2: Low Pressure Side
• Weight [kg]: 0.02
• for OE number: 06E 906 051 K
• Name: Andur,ktuserohk
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• External Thread Size: M10 x 1
• Number of connectors: 3
• Supplementary Article/Info 2: High Pressure Side
• Weight [kg]: 0.042
• for OE number: 06J 906 051 C
• Name: Andur,ktuserohk
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: engine sided
• Number of connectors: 3
• Colour: green
• Cable Length [mm]: 465
• Weight [kg]: 0.062
• Name: DETONATSIOONIANDUR
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: NTC Sensor
• Number of pins: 4
• Pressure from [kPA]: 10
• Pressure to [kPA]: 115
• Manufacturer: FAE

• General Information: pressure sensor
• Manufacturer: VIKA

• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PP358152221
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• General Information: low-pressure sensor
• Manufacturer: BORSEHUNG

• External Thread Size: M10 x 1
• Number of connectors: 3
• Supplementary Article/Info 2: High Pressure Side
• Weight [kg]: 0.042
• for OE number: 06J 906 051 C
• Name: SW 33 10 1057
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Fitting Position: High Pressure Pump (low pressure side)
• Thread Size: M 10
• Supplementary Article/Info 2: with seal ring
• Thread Pitch [mm]: 1
• Thread Length [mm]: 11
• Spanner Size: 24
• Pressure [bar]: 11
• Number of pins: 3
• Mounting Type: Bolted
• Housing Colour: black
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Connector Shape: D Shape
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Cable Length [mm]: 570
• Number of pins: 3
• Housing Colour: grey
• Manufacturer: FAE

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Fuel Mixture Formation: Direct Injection
• Number of pins: 3
• Supplementary Article/Info 2: High Pressure Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.06
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV613
• Manufacturer: ESEN SKV

• Oxygen Sensor: Heated
• Fitting Position: Rear
• General Information: lambda probe; rear
• Manufacturer: VIKA

• Oxygen Sensor: Diagnostic Probe, Unheated
• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: black
• Cable Length [mm]: 920
• for OE number: 06E906265K
• Manufacturer: MEAT&DORIA

• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Number of pins: 3
• Connector Shape: D Shape
• Socket colour: black
• Mounting Type: Bolted
• Supplementary Article/Info 2: Low Pressure Side
• for OE number: 06E906051K
• Manufacturer: MEAT&DORIA

• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 681
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV672
• Manufacturer: ESEN SKV

• Oxygen Sensor: Diagnostic Probe, Heated
• Voltage [V]: 12
• Length [mm]: 595
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV712
• Manufacturer: ESEN SKV

• Oxygen Sensor: Regulating Probe
• Fitting Position: Right
• Manufacturer Restriction: VAG
• Number of pins: 6
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Socket Width [mm]: 2.8
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Voltage [V]: 5
• Number of pins: 3
• Connecting thread: M10x1
• Manufacturer: ERA

• Fuel Mixture Formation: Direct Injection
• Manufacturer Restriction: Niederdrucksensor
• Pressure [bar]: 11
• Version: IAM
• Manufacturer: METZGER

• Engine Code: BDX
• Line insulation design: with silicone-coated woven-fibre insulation
• Connector Shape: D Shape
• for OE number: 03C 906 262 T
• Weight [kg]: 0.131
• Thread Size: M18 x 1,5
• Number of circuits: 4
• Socket colour: brown
• Overall Length [mm]: 400
• Number of pins: 4
• Number of connectors: 4
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Heated
• Number of pins: 4
• Cable Length [mm]: 410
• Quality: OE EQUIVALENT
• for OE number: 466016355077
• Manufacturer: MEAT&DORIA

• Fitting Position: Left
• Oxygen Sensor: Diagnostic Probe, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 755
• Weight [kg]: 0.121
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Range of Applications (cleaner): Polyamid 6.6
• Connector Shape: D Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Cable Length [mm]: 710
• Number of pins: 6
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-021
• Manufacturer: NTY

Lisainfo: ENG. 0.9,1.2TSI,1.6, AUDI A1,A3, VW PASSAT B6,POLO V, FIAT 500,PANDA, SEAT IBIZA IV,ALTEA, LEON, TOLEDO IV, SKODA FABIA II, OCTAVIA II, ROOMSTER, YETI / SONDA REGULACYJNA, Dœ. KABLI 710MM Additional information: ENG. 0.9,1.2TSI,1.6, AUDI A1,A3, VW PASSAT B6,POLO V, FIAT 500,PANDA, SEAT IBIZA IV,ALTEA, LEON, TOLEDO IV, SKODA FABIA II, OCTAVIA II, ROOMSTER, YETI / SONDA REGULACYJNA, Dœ. KABLI 710MM

• for OE number: 06E906265J, 036906262AA
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 620
• Number of pins: 4
• Weight [g]: 107
• Gross Weight [g]: 138
• Manufacturer: DENSO
• Quality class: Q
• Name: Lambda sensor

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor