• Engine Code: AXX, BWA
• Material: Rubber
• Manufacturer: JP GROUP
• Lisainfo: Seal, crankcase breather
• Additional information: Seal, crankcase breather

• Engine Code: AXX, BWA
• Quantity per packing unit: 10
• Name: Tihend, karterituulutus
• Manufacturer: ELR

• Fabrication Number: GPP-VW-038
• Fitting Position: Right

• Engine Code: AXX, BWA
• Material: Rubber
• Name: Tihend, karterituulutus
• Manufacturer: DRM

• Fitting Position: Front
• Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Weight [kg]: 0.11
• Required quantity: 1
• General Information: seal for oil separator
• Manufacturer: VIKA

• Fitting Position: Upper
• Material: MVQ (silicone rubber)
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Fabrication Number: BPZ-VW-020A

• Engine Code: AXX, BWA
• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• for OE number: 06F 103 483 E
• Width [mm]: 90
• Height [mm]: 10
• Length [mm]: 130
• Weight [g]: 10
• Guarantee: 3 years guarantee
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: CAWB, CCZA
• Fitting Position: engine sided
• Name: Tihend, karterituulutus
• Manufacturer: ELR

• for OE number: 6F 103 221 E
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: AXX, BWA
• Manufacturer: JP GROUP A/S
• Lisainfo: Hose, crankcase breather
• Additional information: Hose, crankcase breather

• Engine Code: AXX, BWA
• Material: Rubber
• Manufacturer: ELRING

• General Information: seal for oil separator
• Manufacturer: VIKA

• Engine Code: BWA, AXX
• Name: VOOLIK,KARTERITUULUTUS
• Manufacturer: MAX

• Material: Plastic, Aluminium/steel
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: BWA, AXX
• Material: FPM (fluoride rubber)
• Fitting Position: Front
• Weight [kg]: 0.11
• Name: TIHEND, KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Crankcase
• Fabrication Number: SEP-AU-001
• Name: NTY SEP-AU-001
• Manufacturer: NTY

• Valve type: Non-Return Valve
• General Information: connecting hose; with check valve
• Manufacturer: BORSEHUNG

• Engine Code: CAWB, CCZA
• Name: Tihend, karterituulutus
• Manufacturer: DRM
• Additional information: DRM0909
• Lisainfo: DRM0909

Brief Information: Always compare old and new part (in particular OE No.)

• Engine Code: CAWB, CCZA
• Fitting Position: from cylinder head cover to oil separator
• Material: FPM (fluoride rubber)
• Name: Tihend, karterituulutus
• Manufacturer: ELR

• for OE number: 06F103221E
• Weight [g]: 37
• Inner Diameter 1 [mm]: 12
• Inner Diameter 2 [mm]: 12
• Name: Voolik,Karterituulutus
• Manufacturer: IMP

• General Information: non-return valve
• Manufacturer: BORSEHUNG

• for OE number: 6F103235
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: BPZ-VW-020
• Manufacturer: NTY

• Engine Code: BWA, AXX
• Weight [kg]: 0.149
• for OE number: 06F 129 101 R
• Observe service information:
• Manufacturer: ENERGY

• Manufacturer: JP GROUP A/S
• Lisainfo: Breather valve for cylinder block
• Additional information: Breather valve for cylinder block

• Fabrication Number: EPCV-AU-001
• Manufacturer: NTY

• Engine Code: AXX, BWA
• Guarantee: 3 years guarantee
• Weight [kg]: 0.07
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 54SKV037

• Length [mm]: 260
• Width [mm]: 100
• Height [mm]: 35
• Weight [kg]: 0.041
• Inner Diameter [mm]: 19.3
• Manufacturer: METALCAUCHO

• Engine Code: CAWB
• Width [mm]: 80
• Height [mm]: 40
• Hose Length [mm]: 300
• Inner Diameter 1 [mm]: 23
• Inner Diameter 2 [mm]: 10
• Weight [kg]: 0.063
• for OE number: 06J 103 213 B
• Observe service information:
• Name: Voolik,Karterituulutus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 300
• Inner Diameter 1 [mm]: 23
• Inner Diameter 2 [mm]: 10
• Guarantee: 3 years guarantee
• Width [mm]: 80
• Height [mm]: 40
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Length [mm]: 310
• Inner Diameter 1 [mm]: 10
• Inner Diameter 2 [mm]: 23
• Guarantee: 3 years guarantee
• Width [mm]: 90
• Height [mm]: 35
• Weight [kg]: 0.08
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 54SKV039

• Length [mm]: 280
• Guarantee: 3 years guarantee
• Width [mm]: 95
• Height [mm]: 35
• Weight [kg]: 0.07
• Inner Diameter [mm]: 18
• Always compare old and new part (in particular OE No.):
• Name: CE 54SKV041
• Manufacturer: ESEN SKV

• Engine Code: CCZA, CAWB
• Width [mm]: 100
• Height [mm]: 35
• Inner Diameter [mm]: 19.3
• Hose Length [mm]: 260
• Supplementary Article/Info 2: with quick couplers
• Fitting Position: Front
• Weight [kg]: 0.041
• for OE number: 06J 103 221
• Observe service information:
• Name: Voolik,Karterituulutus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 06J103221
• Weight [g]: 67
• Name: Voolik,Karterituulutus
• Manufacturer: IMP

• Supplementary Article/Supplementary Info: with gasket/seal
• Operating Mode: Pressure Controlled
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: AXX, BWA
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 06H 103 464 L
• Name: Olieraldaja, karterituulutus
• Manufacturer: TRU

• Engine Code: BWA, AXX
• Weight [kg]: 0.026
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CCZA
• Width [mm]: 95
• Height [mm]: 35
• Inner Diameter [mm]: 18
• Hose Length [mm]: 280
• Supplementary Article/Supplementary Info: with quick coupling
• Weight [kg]: 0.068
• Observe service information:
• Name: Voolik,Karterituulutus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CCZA, CAWB
• Weight [kg]: 0.06
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AXX, BWA
• Block Separation:
• Emission Standard: Euro 4 (D4)
• Material: Plastic
• Name: klapp, karterituulutus
• Manufacturer: MAX

• Engine Code: CCZA, CAWB
• Cooling Hose: Crankcase Ventilation Hose
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: BWA
• Operating Mode: pneumatic
• Valve type: Breather Valve
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.19
• Manufacturer: SKV GERMANY
• Name: CE 31SKV002

• Engine Code: CCZA
• Width [mm]: 95
• Inner Diameter [mm]: 18
• Height [mm]: 35
• Hose Length [mm]: 280
• Supplementary Article/Supplementary Info: with quick coupling
• Weight [kg]: 0.068
• Observe service information:
• Name: SW 33 10 0583
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 06J 103 213 E
• Guarantee: 3 years guarantee
• Length [mm]: 247
• Width [mm]: 185
• Height [mm]: 39
• Weight [g]: 70
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: AXX, BWA
• Weight [kg]: 0.07
• Manufacturer: METALCAUCHO

• Fitting Position: Cylinder Head
• Operating Mode: Pressure Controlled
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.19
• Name: CE 31SKV004
• Manufacturer: ESEN SKV

• General Information: oil separator
• Manufacturer: VIKA

• Fitting Position: Crankcase
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic), Polyamid 6
• Seal Material: FPM (fluoride rubber)
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: Olieraldaja, karterituulutus
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 06J103213E
• Weight [g]: 80
• Inner Diameter 1 [mm]: 17
• Name: IM 223577
• Manufacturer: ORIGINAL IMPERIUM

• Engine Code: BWA, AXX
• Height [mm]: 47
• Emission Standard: Euro 4
• Fitting Position: Cylinder Head
• Valve type: Throttle Valve, Breather Valve, Diaphragm Valve
• Length [mm]: 189
• Observe technical data:
• Width [mm]: 86
• Observe service information:
• Operating Mode: Pressure Controlled
• Supplementary Article/Supplementary Info: without gasket/seal
• Observe the vehicle manufacturer specifications:
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: MAX

• Fitting Position: Cylinder Head
• Material: Plastic
• Valve type: Breather Valve
• See accessories list for additionally required parts:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AXX, BWA
• Length [mm]: 188
• Height [mm]: 42
• Valve type: Breather Valve, Diaphragm Valve
• Article number of recommended accessories: V10-3247
• Operating Mode: Pressure Controlled
• Recommended change interval [years]: 3
• Width [mm]: 84
• Supplementary Article/Supplementary Info: without gasket/seal
• Observe service information:
• Housing material: Polyamid 6.6
• Fitting Position: Cylinder Head
• Recommended change interval [km]: 60,000
• Observe technical data:
• Observe the vehicle manufacturer specifications:
• Weight [kg]: 0.227
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Article number of recommended accessories: DRM079
• Name: Olieraldaja, karterituulutus
• Manufacturer: DRM

• for OE number: 06A 103 495 AC
• Fitting Position: Cylinder Head
• Length [mm]: 215
• Width [mm]: 200
• Height [mm]: 90
• Operating Mode: Pressure Controlled
• Valve type: Diaphragm Valve, Breather Valve
• Supplementary Article/Supplementary Info: with gasket/seal
• for engine number: CBFA, CCTA
• Observe service information:
• Housing material: Polyamid 6.6
• Seal Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
• Fabrication Number: SEP-VW-008
• Manufacturer: NTY
• Name: NTY SEP-VW-008

• Material: Plastic
• Supplementary Article/Info 2: without bolts
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

Manufacturer: ERA

• Operating Mode: Pressure Controlled
• Fabrication Number: SEP-VW-012
• Manufacturer: NTY
• Name: NTY SEP-VW-012

Manufacturer: ERA

• Engine Code: CCZA
• Supplementary Article/Supplementary Info: with gasket/seal
• Operating Mode: Pressure Controlled
• Fitting Position: Cylinder Head
• Alternative Repair Kit: 2385072, 2385148
• Consult accessories list for recommended additional repairs:
• Manufacturer: ENERGY

• Material: Plastic
• Supplementary Article/Info 2: without bolts/screws
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Supplementary Info: with hose
• Observe service information:
• Name: OLIERALDAJA, KARTERITUULUTUS
• Manufacturer: MAX

• Fitting Position: Upper, Cylinder Head Cover
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic), Polyamid 6
• Operating Mode: Pressure Controlled
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Cylinder Head Cover, Upper
• Housing Type: Synthetic Material Housing
• Housing material: GRP (Glass fibre Reinforced Plastic), Polyamid 6
• Operating Mode: Pressure Controlled
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: ENERGY

• for OE number: 6H 103 495 E
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: BWA, AXX
• Weight [kg]: 0.149
• for OE number: 06F 129 101 R
• Observe service information:
• Name: KLAPP, KARTERITUULUTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.19
• Name: CE 31SKV089
• Manufacturer: ESEN SKV

• Construction Year to: 08.2012
• Material: Plastic
• Colour: black
• Manufacturer: GATES

• Engine Code: BWA, CCZA
• Manufacturer: JP GROUP
• Lisainfo: Oil Trap, crankcase breather
• Additional information: Oil Trap, crankcase breather

• Engine Code: CCZA
• Fitting Position: Left Rear
• Weight [kg]: 0.072
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fabrication Number: SEP-VW-015
• Supplementary Article/Supplementary Info: with hose
• Manufacturer: NTY
• Name: NTY SEP-VW-015