Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Engine Code: BMN,
CBBB - Inner Diameter [mm]: 32
-
Engine Code: BMN,
CBBB - Material: Stainless Steel
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: FIS
- Engine Code: BMN
- Construction Year to: 05.2007
- Thickness [mm]: 1
- Width [mm]: 46
- Length [mm]: 76
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: AJU
- Fitting Position: Lower
- Gasket Design: Fibre Composite
- Chemical Properties: Asbestos Free
- Mounting Type: Flange mounting
- Number of flange connections: 2
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Guarantee: 3 years guarantee
- Weight [kg]: 0.01
- Always compare old and new part (in particular OE No.):
- Manufacturer: ESEN SKV
-
Engine Code: BMN,
CBBB - Inner Diameter [mm]: 32
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: FIS
- Quantity per packing unit: 10
- Gasket Design: Steel
- Mounting Type: Flange mounting
- Flange Hole Diameter [mm]: 25
- Number of flange connections: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: BMN,
CBBB - Quantity per packing unit: 5
- Inner Diameter [mm]: 32
- Manufacturer: ELRING
- Lisainfo: 729.970 ELR
- Additional information: 729.970 ELR
- Engine Code: CFGB
- Material: Stainless Steel
- Length [mm]: 64
- Name: FI 411560
- Manufacturer: FA1
- Engine Code: CFGB
- Inner Diameter [mm]: 25
- Weight [kg]: 0.004
-
Name: Tihend,
EGR- klapp - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CFGB
- Required quantity: 4
- Material: Stainless Steel
- Length [mm]: 60
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: FIS
-
Engine Code: BMN,
CBBB - Material: Stainless Steel
- Manufacturer: DRIVE
- Engine Code: CFGB
- Construction Year from: 11.2010
- Manufacturer: JP GROUP
-
Lisainfo: Gasket,
EGR valve pipe -
Additional information: Gasket,
EGR valve pipe
- Engine Code: CFGB
- Required quantity: 4
- Quantity per packing unit: 10
- Manufacturer: ELRING
- Mounting Type: Flange mounting
- Flange Hole Diameter [mm]: 24.8
- Gasket Design: Steel
- Material: Stainless Steel
- Number of flange connections: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: CFGB
- Fitting Position: behind exhaust turbocharger
- Material: Stainless Steel
- Length [mm]: 64
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: FIS
- Engine Code: CFGB
- Fitting Position: behind exhaust turbocharger
- Quantity per packing unit: 10
- Manufacturer: ELRING
-
Engine Code: BMN,
CBBB - Inner Diameter [mm]: 22
- Manufacturer: ELRING
- Engine Code: BMN
- Weight [kg]: 0.007
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Mounting Type: Flange mounting
- Flange Hole Diameter [mm]: 26.2
- Gasket Design: Steel
- Material: Stainless Steel
- Number of flange connections: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: BMN
- Construction Year to: 05.2007
- Thickness [mm]: 0.4
- Inner Diameter [mm]: 46
- Outer Diameter [mm]: 76
-
Name: TIHEND,
EGR- KLAPP - Manufacturer: AJU
- Additional information: AJU01112700
- Lisainfo: AJU01112700
- Engine Code: CFGB
- Inner Diameter [mm]: 26.4
- Material: Stainless Steel
- Weight [kg]: 0.004
-
Name: Tihend,
EGR- klapp - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: CFGB
- Fitting Position: Bypass Flap at EGR cooler
- Number of mounting bores: 6
- Manufacturer: ELRING
- Engine Code: BMN
-
Shape: O-
Ring - Cooling Hose: from auxiliary water pump to crankcase
- Diameter [mm]: 55.2
- Fitting Position: Throttle Valve at EGR valve
- Thickness [mm]: 2.62
- Weight [kg]: 0.002
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: CBBB,
BMN - Block Separation:
- Quantity per packing unit: 5
- Fitting Position: Throttle Housing
- Inner Diameter [mm]: 55
- Outer Diameter [mm]: 59
- Thickness [mm]: 4.6
-
Material: FPM
(fluoride rubber) - Shape: A Shape
- Colour: red
- Manufacturer: ELRING
for OE number: 03G 128 063 G, 03G 128 063 M, 03G 128 063 Q, 03L 128 063 AC, 03L 128 063 E, 03L 128 063 G, 03L 128 063 J, 03L 128 063 L, 03L 128 063 M, 03L 128 063 Q, 03L 128 063 R, A2C59512935, A2C59514304
- Engine Code: BMN
-
for OE number: 03L128063L,
03L128063R - Outer Diameter [mm]: 59
- Thickness [mm]: 4.6
- Fitting Position: Throttle Housing
- Inner Diameter [mm]: 55
-
Name: Tihend,
EGR- klapp - Manufacturer: DRM
-
Engine Code: CBBB,
BMN -
Fitting Position: Throttle Housing,
Throttle Valve at EGR valve - Material: Rubber
- Colour: black
-
Lisainfo: Seal,
EGR valve -
Additional information: Seal,
EGR valve
- Construction Year to: 05.2010
-
Engine Code: BMN,
CBBB -
for article number: V10-
63- 0076 - Weight [kg]: 0.003
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: CFGB
- Number of mounting bores: 2
- Inner Diameter [mm]: 26.5
- Distance of mounting bores [mm]: 47
- Mounting points diameter [mm]: 8.2
-
Gasket Design: Multilayer Steel
(MLS) - Supplementary Article/Info 2: with retaining strap
- Manufacturer: ELRING
- for OE number: 04L131547S
- Manufacturer: MEAT & DORIA
- Engine Code: CFGB
-
Name: Tihendikomplekt,
EGR- ssteem - Manufacturer: ELR
-
Engine Code: BMN,
CBBB - Name: FI KG110045E
- Manufacturer: FA1
- Engine Code: CFGB
- Always compare old and new part (in particular OE No.):
- Manufacturer: DR MOTOR
- Name: DRM 01345S
- Engine Code: CFGB
-
Article number of recommended accessories: V99-
99- 0030 -
for article number: V10-
63- 0082, V10- 63- 0084, V10- 63- 0083 - Weight [kg]: 0.035
- Number of Gaskets/Seals/Seal Rings: 10
- Manufacturer: VEMO
-
Lisainfo: V10-
63- 9083 VEM -
Additional information: V10-
63- 9083 VEM
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: BMN,
CBBB - Quantity per packing unit: 5
- Inner Diameter [mm]: 61
- Thickness [mm]: 3
-
Material: NBR
(nitrile butadiene rubber) -
Shape: O-
Ring - Fitting Position: EGR valve at manifold
- Alternatively:
-
Engine Code: BMN,
CBBB - Quantity per packing unit: 100
- Inner Diameter [mm]: 61
- Thickness [mm]: 3
-
Material: NBR
(nitrile butadiene rubber) -
Shape: O-
Ring - Fitting Position: EGR valve at manifold
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks