• Engine Code: CANB
• Fitting Position: Right
• Name: Tihend,sisselaskekollektori korpus
• Manufacturer: ELR

• Engine Code: CANB
• Fitting Position: Left
• Name: Tihend,sisselaskekollektori korpus
• Manufacturer: ELR

• Plug Type: Blade Terminal Sleeve
• Plug housing design: Plug sleeve housing
• Number of pins: 2
• Manufacturer Restriction: Mercedes-Benz, VAG, Scania
• Socket Width [mm]: 2.8
• Cable Cross Section [mm²]: 0.75
• Protection Type (IP Code): IP X7
• Cable Length [mm]: 500
• for article number: 82710249, 82710380, 82710396
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with hose
• Supplementary Article/Info 2: with pipe
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, keskne elektrissteem
• Manufacturer: HBE
• Lisainfo: 50390266
• Additional information: 50390266

• Weight [kg]: 0.014
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Operating Mode: Electric
• Fabrication Number: ENK-VW-008
• Manufacturer: NTY
• Name: NTY ENK-VW-008

• Quantity per packing unit: 16
• Fabrication Number: BKS-AU-015
• Manufacturer: NTY
• Name: NTY BKS-AU-015

• Fitting Position: Suction Pipe, both sides
• Supplementary Article/Info 2: with coupling rod, with retaining ring
• Supplementary Article/Supplementary Info: with lever
• Alternative Repair Kit: 119 283
• Standard Set:
• contains more articles than the OE kit (art. no.): 059 198 212
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Suction Pipe, both sides
• Supplementary Article/Info 2: with coupling rod, with retaining ring
• Supplementary Article/Supplementary Info: with lever
• Standard Set:
• Name: Remondikomplekt, imitoru moodul
• Manufacturer: MAX
• Lisainfo: 059198212/MG
• Additional information: 059198212/MG

• Valve type: Solenoid Valve
• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 2
• Connector Shape: D Shape
• Number of inlets/outlets: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fabrication Number: BKS-AU-002A
• Manufacturer: NTY

• Weight [kg]: 0.04
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 49SKV502

• Engine Code: CANB
• Manufacturer Restriction: VAG
• Number of pins: 5
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: Gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, EGR-klapp
• Manufacturer: HBE

• Weight [kg]: 0.15
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 49SKV500

• Fabrication Number: BKS-AU-001A
• Manufacturer: NTY
• Name: NTY BKS-AU-001A

• Weight [kg]: 0.33
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Engine Code: BSG
• Regulator: without control regulator
• Housing material: Polyamid 6.6
• Supplementary Article/Supplementary Info: with lever, with gasket/seal
• Supplementary Article/Info 2: with mounting parts, with bolts/screws
• Fitting Position: Left
• Name: Ohuvotumoodul
• Manufacturer: MAX
• Lisainfo: 059129711CK/MG
• Additional information: 059129711CK/MG

• Weight [kg]: 0.35
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: BSG
• Fitting Position: Right
• Regulator: without control regulator
• Housing material: Polyamid 6.6
• Supplementary Article/Supplementary Info: with lever, with gasket/seal
• Supplementary Article/Info 2: with mounting parts, with bolts/screws
• Name: Ohuvotumoodul
• Manufacturer: MAX
• Lisainfo: 059129712BQ/MG
• Additional information: 059129712BQ/MG

• Manufacturer: DR MOTOR
• Name: DRM 0780SL

• Weight [kg]: 0.08
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 49SKV543

• Fitting Position: Left
• Name: Ohuvotumoodul
• Manufacturer: MAX

• Fitting Position: Right
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with bolts/screws
• Fabrication Number: BKS-AU-008
• Manufacturer: NTY
• Name: NTY BKS-AU-008

• Fitting Position: Left
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with bolts/screws
• Fabrication Number: BKS-AU-009
• Manufacturer: NTY
• Name: NTY BKS-AU-009

Manufacturer: 3RG

• Engine Code: BSG
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.9
• Manufacturer: SKV GERMANY
• Name: CE 96SKV017
• Additional information: SKV96SKV017
• Lisainfo: SKV96SKV017

• Fitting Position: Suction Pipe, both sides
• Supplementary Article/Supplementary Info: with lever, with gaskets/seals
• Number of bolts/screws: 16
• Length 1 [mm]: 237
• Length 2 [mm]: 270
• Alternative Repair Kit: 119 215
• Full Set:
• contains more articles than the OE kit (art. no.): 059 198 212
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with coupling rod, with bolts/screws, with retaining ring General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BSG
• Fitting Position: Left
• Manufacturer: JPN

• Engine Code: BSG
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.9
• Manufacturer: SKV
• Lisainfo: 96SKV018 SKV
• Additional information: 96SKV018 SKV

• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.91
• Manufacturer: SKV GERMANY

• Fitting Position: Left
• Used part return not required:
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Operating Mode: Electronic
• New part without deposit:
• Number of pins: 5
• Voltage [V]: 12
• Used part return not required:
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: BSG
• Manufacturer: JPN

• Operating Mode: Electronic
• Observe service information:
• Always compare old and new part (in particular OE No.):
• Fabrication Number: ENK-VW-006
• Manufacturer: NTY

Supplementary Article/Info 2: Control Unit/Software must be trained/updated, with sensor

• Engine Code: BSG
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.52
• Manufacturer: SKV GERMANY
• Name: CE 96SKV016

• for OE number: 059 129 711 CK
• Fitting Position: Left
• Regulator: without control regulator
• Manufacturer: TRUCKTEC

• for OE number: 059 129 712 BQ
• Fitting Position: Right
• Regulator: without control regulator
• Manufacturer: TRUCKTEC

• Engine Code: BSG
• paired article number: 176519
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Right
• Weight [kg]: 0.655
• Supplementary Article/Supplementary Info: without adjusting element, with gasket/seal
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right
• Used part return not required:
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: BSG
• paired article number: 176463
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Left
• Weight [kg]: 0.674
• Supplementary Article/Supplementary Info: without adjusting element, with gasket/seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Left
• Regulator: without control regulator
• Material: Plastic
• Observe mounting information:
• Installation Information: not for aluminum pressure tube
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Right
• Manufacturer: YSPARTS

• Weight [kg]: 0.15
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 49SKV523

• Manufacturer: VIKA

General Information: Air intake manifold; without intake manifold actuator

• Manufacturer: VIKA

General Information: Air intake manifold; without intake manifold actuator

• Engine Code: CANB
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.5
• Manufacturer: SKV GERMANY
• Name: CE 96SKV041

Manufacturer: MAGNETI MARELLI

• Fitting Position: Right
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with ball joint
• Manufacturer: METALCAUCHO

• Engine Code: CANB
• Operating Mode: Electronic
• Manufacturer: JPN

• Fitting Position: Right
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with bolts/screws, with ball joints
• for OE number: 059 129 712 BQ
• Width [mm]: 163
• Height [mm]: 109
• Length [mm]: 312
• Guarantee: 3 years guarantee
• Regulator: without control regulator
• Additionally required articles (article numbers): at11337
• Material: Plastic
• Colour: black
• Manufacturer: AT AUTOTEILE

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: Left
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with ball joint
• Manufacturer: METALCAUCHO

• Engine Code: BSG
• Fitting Position: Left
• paired article number: DRM21806
• Name: Ohuvotumoodul
• Manufacturer: DRM
• Quality class: PJ

• Engine Code: BSG
• Fitting Position: Right
• paired article number: DRM21805
• Name: Ohuvotumoodul
• Manufacturer: DRM
• Quality class: PJ

• Supplementary Article/Supplementary Info: with gasket/seal, with lever
• Supplementary Article/Info 2: with bolts/screws
• Fabrication Number: BKS-AU-001
• Manufacturer: NTY

• Engine Code: CANB
• Operating Mode: Electric
• Voltage [V]: 12
• Name: Seadeelement,mberllitusklapp(ohutoru)
• Manufacturer: MAX

• Fitting Position: Left, Right
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Observe service information:
• Always compare old and new part (in particular OE No.):
• Fabrication Number: ENK-VW-007
• Manufacturer: NTY

• Fitting Position: Left
• Regulator: without control regulator
• for OE number: 059129711CK
• Name: Ohuvotumoodul
• Manufacturer: MD

• Fitting Position: Left
• Operating Mode: Electronic
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.57
• Manufacturer: SKV GERMANY

• Fitting Position: Right
• for OE number: 059129712BQ
• Name: Ohuvotumoodul
• Manufacturer: MD

• Construction Year from: 01.2005
• Construction Year to: 12.2008
• Operating Mode: Electronic
• New part without deposit:
• Used part return not required:
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Left
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 059 129 711 CK
• Width [mm]: 163
• Height [mm]: 109
• Length [mm]: 312
• Guarantee: 3 years guarantee
• Regulator: without control regulator
• Additionally required articles (article numbers): at22104
• Manufacturer: AT AUTOTEILE

Supplementary Article/Info 2: with bolts/screws, with ball joints, Control Unit/Software must NOT be trained/updated General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• General Information: Air intake manifold
• Manufacturer: VIKA

• Engine Code: BSG
• Fitting Position: Right
• Regulator: without control regulator
• Supplementary Article/Supplementary Info: with gasket/seal, with lever
• Housing material: Polyamid 6.6
• Fuel Type: Diesel
• Supplementary Article/Info 2: with mounting parts, with bolts/screws
• Material: Plastic
• paired article number: V10-3948
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• General Information: Air intake manifold
• Manufacturer: VIKA

• Engine Code: BSG
• Operating Mode: Electric
• Number of connectors: 4
• Manufacturer: JPN

• Engine Code: CANB
• Operating Mode: Electric
• Voltage [V]: 12
• Observe the vehicle manufacturer specifications:
• for OE number: 059 129 086 L
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer: PIE

Name: Kinnituselement, sisselaskekollektori klapid (ohutoru)

• Fitting Position: Right, Suction Pipe, Left
• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 4
• Connector Shape: D Shape
• Housing material: Aluminium
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Consult accessories list for recommended additional repairs:
• Observe the vehicle manufacturer specifications:
• New Part:
• Used part return not required:
• electrostatic sensitive part:
• Always compare old and new part (in particular OE No.):
• Technical Information: do not touch plug contacts !
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• paired article number: at22104
• Guarantee: 3 years guarantee
• for OE number: 059 129 086 G
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: BSG
• Fitting Position: Left
• Regulator: without control regulator
• Supplementary Article/Supplementary Info: with gasket/seal, with lever
• Housing material: Polyamid 6.6
• Fuel Type: Diesel
• Supplementary Article/Info 2: with mounting parts, with bolts/screws
• Material: Plastic
• Observe the vehicle manufacturer specifications:
• paired article number: V10-3949
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BSG
• Vehicle Identification Number (VIN) from: 4F-5-000 001
• Fitting Position: Right
• Name: Ohuvotutoru,ohuvarustus
• Manufacturer: PIE

• for OE number: 059129086K
• Manufacturer: MEAT&DORIA

• Engine Code: BSG
• Fitting Position: Left
• Supplementary Article/Supplementary Info: without gasket/seal
• Regulator: without control regulator
• paired article number: 2100008
• Additionally required articles (article numbers): 2100032
• Manufacturer: METZGER

• Engine Code: BSG
• Construction Year from: 01.2005
• Construction Year to: 12.2008
• Vehicle Identification Number (VIN) from: 4F-5-000 001
• Fitting Position: Left, Right
• Article number of recommended accessories: VW/Audi 059 198 212, VAS 6395A, VAS 6395B
• Observe the vehicle manufacturer specifications:
• Observe service information:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Always compare old and new part (in particular OE No.):
• Name: Seadeelement,mberllitusklapp(ohutoru)
• Manufacturer: VDO

General Information: Components at risk due to electrostatic discharge (DO NOT TO UCH PLUG CONTACTS)

• Engine Code: BSG
• Vehicle Identification Number (VIN) from: 4F-5-000 001
• Fitting Position: Left
• Name: Ohuvotutoru,ohuvarustus
• Manufacturer: PIE