• Manufacturer: JP GROUP
• Lisainfo: Water Pump
• Additional information: Water Pump

• Lisainfo: Water pump
• Additional information: Water pump

• for OE number: 03L 121 011
• Number of Teeth: 19
• Water Pump Type: for timing belt drive
• Manufacturer: KAMOKA

• Number of Teeth: 19
• Water Pump Type: for timing belt drive
• Manufacturer: KAMOKA POMPY WODY

• Number of Teeth: 19
• Impeller Diameter [mm]: 63.6
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Name: VEEPUMP
• Manufacturer: MAX

• Number of Teeth: 19
• Pulleys: with belt pulley
• Manufacturer: DENCKERMANN FILTRY

• Construction Year from: 01.2005
• Water Pump Type: for timing belt drive
• Operating Mode: Mechanical
• Name: VEEPUMP
• Manufacturer: MAX

• Engine Code: CAGB
• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Number of Teeth: 19
• Fabrication Number: CPW-AU-024
• Manufacturer: NTY

• Number of Teeth: 19
• Number of blades/vanes: 8
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• Name: Water pump
• Quality class: PJ

Lisainfo: "Tootja: SRL
SHARAN
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SHARAN
(kvaliteediklass: PJ)"

• Construction Year from: 01.2005
• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Name: VEEPUMP
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: BGA

• for OE number: 038121011H
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of Teeth: 19
• Manufacturer: DELLO AUTOMEGA

• Engine Code: BNA, BRF
• Water pump impeller material: Sheet Steel
• Number of Teeth: 19
• Overall Height [mm]: 99
• Operating Mode: Mechanical
• Manufacturer: ASHIKA

• Construction Year from: 01.2005
• Engine Code: BNA,BRF
• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• for OE number: 038 121 011D
• Quality class: PJ
• Name: Water pump

Water pump impeller material: PPS (polyphen. sulfide)/TFE (tetrafluoroet.)/ACM (polyacryl)

• General Information: water pump
• Manufacturer: VIKA

• Number of Teeth: 19
• Manufacturer: JPN

• General Information: water pump
• Manufacturer: VIKA

• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: do not use sealant
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 7
• Water Pump Pulley Diameter [mm]: 56.23
• Impeller Diameter [mm]: 64
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Name: VEEPUMP
• Manufacturer: GRA

• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Manufacturer: DRIVE

• Vehicle configuration line / variant: TB
• for OE number: 038121011J
• Weight [kg]: 0.9
• Name: VEEPUMP
• Manufacturer: DAY
• Additional information: DP064
• Lisainfo: DP064

• New Part:
• Weight [kg]: 0.78
• Manufacturer: DOLZ
• Name: DO A251

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.2005
• Engine Code: CAGB
• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• for OE number: 03G 121 011X
• Name: Water pump
• Quality class: PJ

Water pump impeller material: PPS (polyphen. sulfide)/TFE (tetrafluoroet.)/ACM (polyacryl) Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.76
• Manufacturer: AKSDASIS

• Engine Code: BNA, BRF, CAGB
• Vehicle Identification Number (VIN) from: 4F-6-129 001
• Vehicle Identification Number (VIN) to: 4F-6-129 000
• Manufacturer: MAGNETI MARELLI
• Name: MM WPQ1206

• Engine Code: CAGB
• Impeller Diameter [mm]: 63.6
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Technical Information: SKF Aquamax
• Name: VEEPUMP
• Manufacturer: SKF

• Voltage [V]: 12
• Operating Mode: Electric
• Fabrication Number: CPZ-AU-025
• Manufacturer: NTY

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: SW 32 92 4360
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA

• Engine Code: BNA, BRF, CAGB
• Block Separation:
• for OE number: 03L 121 011 G
• Operating Mode: Mechanical
• Water pump impeller material: Plastic
• Supplementary Article/Info 2: with seal ring
• Manufacturer: PIERBURG

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: BLUE PRINT SILNIK

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BNA, BRF, CAGB
• Manufacturer: MAGNETI MARELLI

• Weight [kg]: 1.909
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: CONTITECH

• Engine Code: BNA, BRF, CAGB
• Block Separation:
• Supplementary Article/Info 2: with seal ring
• Operating Mode: Mechanical
• Water pump impeller material: Metal
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Belt Pulley Ø [mm]: 56.2
• Manufacturer: VALEO

• Construction Year from: 01.2009
• Voltage [V]: 12
• for OE number: 03L965561
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Supplementary Article/Supplementary Info: with gasket/seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• reinforced version:
• Observe service information:
• Quality: Sealed with SiC/SiC
• Water pump impeller material: Metal
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Housing material: Stainless Steel
• Chemical Properties: High temperature-resistant
• Name: VEEPUMP
• Manufacturer: MEY

General Information: According to the vehicle manufacturer fitting the current version water pump requires, where necessary, adaption of the rear timing belt cover in the upper area using suitable workshop tools.

• Operating Mode: Mechanical
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of Teeth: 19
• Number of blades/vanes: 8
• Impeller Diameter [mm]: 64
• Water pump impeller material: Metal
• Manufacturer: HEPU

• Engine Code: CAGB
• Operating Mode: Electric
• Voltage [V]: 12
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA ELEKTRYKA

• Engine Code: CAGB
• Number of connectors: 3
• Weight [kg]: 0.215
• for OE number: 03L 965 561
• Observe service information:
• Name: Lisaveepump
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CAGB
• Operating Mode: Electric
• Manufacturer: DOLZ

• Operating Mode: Electric
• Voltage [V]: 12
• for OE number: 03L 965 561
• Manufacturer: HEPU POMPY WODY

• Engine Code: BRF, BNA
• Water pump impeller material: Metal
• Number of Teeth: 141
• Weight [kg]: 2.65
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth: 141
• Width [mm]: 30
• Number of belts: 1
• for article number: A251/03G109244
• Manufacturer: DOLZ

• Number of belts: 1
• Width 1 [mm]: 30
• Number of track rollers: 3
• Number of Teeth: 141
• Manufacturer: SNR
• Name: SN KDP457.500

• Engine Code: BRF, BNA
• Water pump impeller material: Metal
• Number of Teeth: 141
• Weight [kg]: 2.65
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth: 160
• Width [mm]: 30
• Number of belts: 1
• Weight [kg]: 3.05
• for article number: A251
• Manufacturer: DOLZ
• Name: DO KD062

• Engine Code: BNA, BRF
• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 1
• Water pump impeller material: Plastic
• Belt Width [mm]: 30
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 141
• Belts: with rounded tooth profile
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: SKF

• Engine Code: BRF, BNA
• Water pump impeller material: Metal
• Number of Teeth: 141
• Weight [kg]: 2.65
• Observe service information:
• Name: SW 30 93 2742
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of belts: 1
• Weight [kg]: 3.05
• Name: AI WPK-199803
• Manufacturer: AIRTEX

• Construction Year from: 01.2009
• Engine Code: CAGB
• for OE number: 3L 965 561
• Operating Mode: Electric
• Voltage [V]: 12
• Name: LISAVEEPUMP
• Manufacturer: PIE

• Engine Code: BNA,BRF
• Construction Year from: 06.2005
• Number of Teeth 1: 141
• Width 1 [mm]: 30
• Manufacturer: METELLI ROZRZAD

• Engine Code: CAGB
• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 2
• Water pump impeller material: Plastic
• Belt Width [mm]: 30
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with studs
• Number of Teeth: 160
• Belts: with rounded tooth profile
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: SKF

• Engine Code: BNA, BRF
• Number of Teeth 1: 141
• Width 1 [mm]: 30
• Observe service information:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA

• Driven Units: Camshaft
• Engine Code: BNA, BRF
• Article number of the recommended special tool: GAT4840A, GAT4844, GAT4741
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Engine Code: BNA, BRF
• Construction Year to: 06.2008
• Length [mm]: 1,343
• Number of Teeth: 141
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 3
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: BOS

• Number of belts: 1
• Number of track rollers: 4
• Width 1 [mm]: 30
• Number of Teeth: 160
• Manufacturer: SNR
• Name: SN KDP457.670

• Engine Code: CAGB
• Construction Year from: 01.2005
• Number of Teeth 1: 160
• Width 1 [mm]: 30
• Manufacturer: METELLI ROZRZAD

• Engine Code: CAGB
• Water pump impeller material: Metal
• Number of Teeth: 160
• Belts: with rounded tooth profile
• Weight [kg]: 2.56
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CAGB
• Number of belts: 1
• Weight [kg]: 2.96
• Name: AI WPK-199808
• Manufacturer: AIRTEX

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -BNABRF # Mtr.
• Number of Teeth: 141
• Width [mm]: 30
• Length [mm]: 1,343
• Full Set:
• Number of belts: 1
• Pulleys contained: 3
• Weight [kg]: 2.9
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY

• Engine Code: CAGB
• Number of Teeth 1: 160
• Width 1 [mm]: 30
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA

• Engine Code: BNA, BRF, CAGB
• Length [mm]: 1,343
• Manufacturer: MAGNETI MARELLI
• Name: MM MTKQ065P

• Driven Units: Camshaft
• Engine Code: CAGB
• Article number of the recommended special tool: GAT4840A, GAT4844, GAT4741
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT
• Lisainfo: KP15648XS-1 GAT
• Additional information: KP15648XS-1 GAT

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -CAGB # CA
• Number of Teeth: 160
• Width [mm]: 30
• Length [mm]: 1,524
• Full Set:
• Number of belts: 1
• Pulleys contained: 4
• Weight [kg]: 3.1
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY

• Construction Year from: 06.2005
• Engine Code: BNA,BRF
• Number of Teeth 1: 141
• Width 1 [mm]: 30
• Manufacturer: GRAF

• Number of Teeth: 141
• Width [mm]: 30
• Number of belts: 1
• for article number: 570059N
• Packaging length [cm]: 28
• Packaging width [cm]: 17.5
• Packaging height [cm]: 17.5
• Weight [kg]: 2.602
• Manufacturer: AKSDASIS

• Driven Units: Camshaft
• Engine Code: BRF, BNA
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 141
• Weight [kg]: 2.775
• Width [mm]: 30
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON