• Required quantity: 2
• Inner Diameter [mm]: 32

• Quantity per packing unit: 10
• Shape: round, O-Ring
• Inner Diameter [mm]: 55
• Material: MVQ (silicone rubber)
• Thickness [mm]: 3
• Outer Diameter [mm]: 61
• Name: TIHEND, EGR-KLAPP
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Manufacturer: FISCHER

• Fitting Position: Lower
• Gasket Design: Fibre Composite
• Chemical Properties: Asbestos Free
• Mounting Type: Flange mounting
• Number of flange connections: 2
• Name: TIHEND, EGR-KLAPP
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Shape: O-Ring
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Guarantee: 3 years guarantee
• Weight [kg]: 0.01
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV

• Required quantity: 2
• Inner Diameter [mm]: 32
• Name: TIHEND, EGR-KLAPP
• Manufacturer: FIS

• Engine Code: BRF
• Construction Year from: 09.2005
• Thickness [mm]: 1
• Width [mm]: 46
• Length [mm]: 76
• Name: TIHEND, EGR-KLAPP
• Manufacturer: AJU

• Quantity per packing unit: 10
• Gasket Design: Steel
• Mounting Type: Flange mounting
• Flange Hole Diameter [mm]: 25
• Number of flange connections: 2
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: BNA, BRF
• Shape: round
• Material: Rubber
• Name: Tihend, EGR-klapp
• Manufacturer: MAX
• Lisainfo: 70-0130
• Additional information: 70-0130

• Required quantity: 2
• Quantity per packing unit: 5
• Inner Diameter [mm]: 32
• Manufacturer: ELRING
• Lisainfo: 729.970 ELR
• Additional information: 729.970 ELR

• Engine Code: BNA
• Construction Year to: 05.2005
• Thickness [mm]: 0.4
• Inner Diameter [mm]: 46
• Outer Diameter [mm]: 76
• Name: TIHEND, EGR-KLAPP
• Manufacturer: AJU
• Additional information: AJU01112700
• Lisainfo: AJU01112700

• Engine Code: BNA, BRF
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: CAGB, BNA, BRF
• Block Separation:
• Quantity per packing unit: 5
• Fitting Position: Throttle Housing
• Inner Diameter [mm]: 55
• Outer Diameter [mm]: 59
• Thickness [mm]: 4.6
• Material: FPM (fluoride rubber)
• Shape: A Shape
• Colour: red
• Manufacturer: ELRING

for OE number: 03G 128 063 G, 03G 128 063 M, 03G 128 063 Q, 03L 128 063 AC, 03L 128 063 E, 03L 128 063 G, 03L 128 063 J, 03L 128 063 L, 03L 128 063 M, 03L 128 063 Q, 03L 128 063 R, A2C59512935, A2C59514304

• Engine Code: BNA, BRF
• for OE number: 03L128063J
• Outer Diameter [mm]: 59
• Thickness [mm]: 4.6
• Fitting Position: Throttle Housing
• Inner Diameter [mm]: 55
• Name: Tihend, EGR-klapp
• Manufacturer: DRM

• Fitting Position: Throttle Housing, Throttle Valve at EGR valve
• Material: Rubber
• Colour: black
• Lisainfo: Seal, EGR valve
• Additional information: Seal, EGR valve

• Engine Code: CAGB
• Construction Year from: 12.2008
• for article number: V10-63-0076
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Diameter [mm]: 55
• Thickness 1 [mm]: 4.5
• Outer Diameter [mm]: 59
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Number of pins: 2
• Operating Mode: Electric
• Valve type: Solenoid Valve
• for OE number: 1J0906283B, 1J0906283C, 1K0906283A, 1K0906283
• Weight [kg]: 1.1
• Packaging length [cm]: 21
• Packaging width [cm]: 21
• Packaging height [cm]: 17
• Manufacturer: AKSDASIS

Manufacturer: MAGNETI MARELLI

• Observe technical data:
• Manufacturer Restriction: VAG, Renault
• Number of pins: 6
• Socket Width [mm]: 1.5
• Cable Cross Section [mm²]: 0.75
• Cable Length [mm]: 200
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, EGR-klapp
• Manufacturer: HBE

• Engine Code: BNA, BRF
• Material: Aluminium
• Number of pins: 6
• Operating Mode: Electric
• Manufacturer: NISSENS ZAWORY EGR

Supplementary Article/Info 2: with sensor, Control Unit/Software must NOT be trained/updated, without vacuum bypass, without cable, with electronics Technical Information: FIRST FIT - Includes gaskets and O-rings when needed

• Engine Code: BNA, BRF
• Housing Type: Aluminium Housing
• Number of pins: 6
• Operating Mode: Electric
• Cooling Type: Air cooled
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: MAX

• Engine Code: CAGB
• Valve type: Control Valve
• Operating Mode: Electric
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 03G 131 501
• Name: EGR-klapp
• Manufacturer: MAX

• Supplementary Article/Supplementary Info: without EGR cooler
• Operating Mode: Electric
• Number of pins: 5
• Fabrication Number: EGR-AU-002
• Manufacturer: NTY
• Name: NTY EGR-AU-002

• Supplementary Article/Supplementary Info: without EGR cooler, with gaskets/seals
• Operating Mode: Electric
• Number of pins: 5
• Fabrication Number: EGR-AU-005
• Manufacturer: NTY
• Name: NTY EGR-AU-005

• Construction Year to: 11.2008
• Engine Code: BNA, BRF
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: JP GROUP
• Lisainfo: EGR Valve
• Additional information: EGR Valve

• Used part return not required:
• New Part:
• Supplementary Article/Supplementary Info: with gaskets/seals
• Operating Mode: Electric
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO
• Name: AB 121-01-081

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year to: 12.2008
• Vehicle Identification Number (VIN) from: 4F-5-000001
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: without EGR cooler, with gaskets/seals
• Number of pins: 5
• Manufacturer: DENCKERMANN FILTRY

• Construction Year from: 12.2008
• Engine Code: CAGB
• Operating Mode: Electric
• Number of connectors: 5
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: JP GROUP
• Lisainfo: EGR Valve
• Additional information: EGR Valve

• Construction Year to: 09.2008
• Used part return not required:
• New Part:
• Supplementary Article/Supplementary Info: without gasket/seal
• Operating Mode: Electric
• Valve type: Control Valve
• Assy./disassy. by qualified personnel required!:
• Name: AB 121-01-101
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: CAGB
• Operating Mode: Electric
• Voltage [V]: 12
• Number of connectors: 5
• Manufacturer: ASHIKA

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: without EGR cooler
• Number of pins: 5
• Manufacturer: DENCKERMANN FILTRY

• Operating Mode: Electric
• Quality class: PJ
• Name: Exhaust gas recirculation valve

• Engine Code: BNA, BRF
• Operating Mode: Electric
• Supplementary Article/Info 2: with EGR valve
• Supplementary Article/Supplementary Info: without EGR cooler, with gaskets/seals
• Emission Standard: Euro 3
• Number of pins: 6
• Weight [kg]: 1.43
• Manufacturer: VALEO
• Name: VA 703264

Manufacturer: JAPKO

• Engine Code: CAGB
• Operating Mode: Electric
• Voltage [V]: 12
• Number of connectors: 5
• Manufacturer: JAPKO

• Construction Year from: 12.2008
• Engine Code: CAGB
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of connectors: 5
• Fitting Position: Throttle Housing
• Emission Standard: Euro 5
• Net weight [kg]: 1.1
• Name: EGR-KLAPP
• Manufacturer: ELS

• Engine Code: CAGB
• Material: Aluminium
• Number of pins: 5
• Operating Mode: Electric
• Name: EGR-klapp
• Manufacturer: NIS

Supplementary Article/Info 2: with sensor, Control Unit/Software must NOT be trained/updated, without vacuum bypass, without cable, with electronics Technical Information: FIRST FIT - Includes gaskets and O-rings when needed

• Operating Mode: Electric
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18
• Packaging height [cm]: 18
• for OE number: 03G131501B, 03G131501J, 03G131501Q, 03G131501R
• Voltage [V]: 12
• Number of pins: 5
• Weight [kg]: 1.26
• Manufacturer: AKSDASIS

• Engine Code: CAGB
• Voltage [V]: 12
• Connector Shape: oval
• Number of pins: 5
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-klapp
• Manufacturer: NRF

• Engine Code: BNA
• Vehicle Identification Number (VIN) from: 4F-5-000001
• Operating Mode: Electric
• Name: DRM 211114
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Engine Code: CAGB
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: DRM 211116
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Engine Code: BNA, BRF
• Voltage [V]: 12
• Connector Shape: oval
• Number of pins: 6
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: NRF

• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 5
• Manufacturer: DELPHI
• Name: DE EG10404-12B1

• Engine Code: BRF, BNA
• Number of connectors: 6
• Weight [kg]: 1
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-klapp
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 1.22
• Manufacturer: SKV GERMANY
• Name: CE 14SKV085

• Engine Code: CAGB
• Number of connectors: 5
• Operating Mode: Electric
• Weight [kg]: 1.1
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: ENERGY

• Construction Year to: 09.2008
• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 5
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.9
• Manufacturer: SKV GERMANY
• Name: CE 14SKV172

• Operating Mode: Electric
• Supplementary Article/Supplementary Info: without gaskets/seals
• Emission Standard: Euro 5
• Quality: OE EQUIVALENT
• for OE number: 03L131501G
• Manufacturer: MEAT&DORIA

• Operating Mode: Electronic
• Number of pins: 6
• Manufacturer: JPN

• Engine Code: CAGB
• Construction Year from: 12.2008
• Guarantee: 5 years guarantee
• Operating Mode: Electric
• Manufacturer: HUCO
• Name: HU 138460

• Engine Code: BNA, BRF
• Construction Year to: 12.2008
• Voltage [V]: 12
• Operating Mode: Electric
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 1.18
• Manufacturer: SKV GERMANY
• Name: CE 14SKV083

• Engine Code: CAGB
• Operating Mode: Electric
• Voltage [V]: 12
• Number of connectors: 5
• Name: EGR-KLAPP
• Manufacturer: JPA

• Construction Year to: 11.2008
• Engine Code: BNA, BRF
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of connectors: 6
• Net weight [kg]: 1.1
• Name: EGR-KLAPP
• Manufacturer: ELS

• Construction Year to: 12.2008
• Vehicle Identification Number (VIN) from: 4F-5-000001
• Manufacturer: MAGNETI MARELLI

• Engine Code: CAGB
• Valve type: Control Valve
• Operating Mode: Electric
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: PIERBURG
• Additional information: 7.10334.00.0
• Lisainfo: 7.10334.00.0

• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 03G 131 501 Q
• Guarantee: 3 years guarantee
• Number of pins: 6
• Operating Mode: Electric
• Voltage [V]: 12
• Seal Material: Metal
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: BNA, BRF
• Operating Mode: Electronic
• Number of pins: 6
• Supplementary Article/Supplementary Info: without gasket/seal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6NU010171291

• Engine Code: CAGB
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: without EGR cooler, with gaskets/seals
• Manufacturer: VDO

• New Part:
• Engine Code: CAGB
• Housing Type: Aluminium Housing
• Number of pins: 5
• Manufacturer Restriction: VALEO
• Operating Mode: Electric
• Cooling Type: Air cooled
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: TRI

• General Information: EGR valve
• Manufacturer: VIKA

• Model Year to: 2008
• Vehicle Identification Number (VIN) from: 4F-5-000 001
• Engine Code: BNA, BRF
• Valve type: Control Valve
• Operating Mode: Electric
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: EGR-klapp
• Manufacturer: PIE

• Voltage [V]: 12
• Operating Mode: Electric
• Alternatively:
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of connectors: 6
• Weight [kg]: 1.15
• Alternative Repair Kit: 555066
• Manufacturer: ERA

• Engine Code: CAGB
• Operating Mode: Electric
• Number of pins: 5
• Supplementary Article/Supplementary Info: with gasket/seal
• Assy./disassy. by qualified personnel required!:
• Name: HE 6NU010171801
• Manufacturer: HELLA

• Voltage [V]: 12
• Operating Mode: Electric
• Number of connectors: 5
• Supplementary Article/Info 2: with seal ring
• Connector Shape: oval
• Number of mounting bores: 3
• Weight [kg]: 0.86
• Manufacturer: ERA

• Engine Code: CAGB
• Number of connectors: 5
• Operating Mode: Electric
• Weight [kg]: 1.1
• Supplementary Article/Supplementary Info: with gaskets/seals
• Name: EGR-KLAPP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CAGB
• Operating Mode: Electric
• Supplementary Article/Supplementary Info: without EGR cooler, with gaskets/seals
• Emission Standard: Euro 5
• Number of pins: 5
• Supplementary Article/Info 2: without vacuum bypass, without clamp
• Weight [kg]: 1.14
• Name: EGR-KLAPP
• Manufacturer: VAL

General Information: When replacing and/or cleaning the EGR system, take care with the collar.

• Engine Code: BNA, BRF
• Construction Year to: 12.2008
• Vehicle Identification Number (VIN) from: 4F-5-000 001
• Supplementary Article/Supplementary Info: without gaskets/seals
• Operating Mode: Electric
• Observe the vehicle manufacturer specifications:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Always compare old and new part (in particular OE No.):
• Name: EGR-klapp
• Manufacturer: VDO

Article number of recommended accessories: VDO A2C59516936, Audi 03G 131 547 F, VDO A2C59516937, Audi 03L 131 547 B, ACV A2C59511698, 03G 128 063 J, 03G 128 063 C, VDO A2C59516938, Audi N 905 216 01, VDO A2C59516939, Audi 069 131 547 D General Information: Components at risk due to electrostatic discharge (DO NOT TO UCH PLUG CONTACTS)

• Engine Code: BNA, BRF
• Quantity per packing unit: 100
• Inner Diameter [mm]: 61
• Thickness [mm]: 3
• Material: NBR (nitrile butadiene rubber)
• Shape: O-Ring
• Fitting Position: EGR valve at manifold