• Thread Size: M18x1.5
• Cable Length [mm]: 800
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 079906265
• Quality: OE
• Weight [g]: 131
• Gross Weight [g]: 164
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
A6 (4F2, C6), 05.04-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A6 (4F2, C6), 05.04-
(kvaliteediklass: Q)"

• General Information: Fuel temperature sensor
• Manufacturer: VIKA

• Number of pins: 2
• Connector Shape: D Shape
• Socket colour: dark grey
• Fitted Diameter [mm]: 25
• Sensor Type: NTC Sensor
• Fitting Depth [mm]: 20
• for OE number: 06A919501A
• Manufacturer: MEAT & DORIA

• Engine Code: BBJ
• Colour: grey
• Block Separation:
• Colour Coding: grey
• for article number: 1.660.015K, 1.830.278K, 1.879.946
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS
• Additional information: 1-830-278
• Lisainfo: 1-830-278

• Engine Code: BBJ
• Colour: grey
• Block Separation:
• Colour Coding: grey
• for article number: 26.0015K, 7.3278K, 7.7946
• Manufacturer: FACET

• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: green
• Fitted Diameter [mm]: 20
• Diameter [mm]: 25.5
• for OE number: 059919501A
• Manufacturer: MEAT&DORIA

• Number of pins: 4
• Housing Colour: green
• Connector Shape: round
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Sensor Type: NTC Sensor
• Colour Coding: green
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA109

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: black
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: black, grey
• Fitting Depth [mm]: 20
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Length [mm]: 20
• Colour Coding: grey
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA111

• for OE number: 059 919 501 A
• paired article number: at10064
• Width [mm]: 58
• Height [mm]: 25
• Length [mm]: 25
• Guarantee: 3 years guarantee
• Number of pins: 4
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Number of connectors: 4
• Connector Shape: round
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fabrication Number: ECM-AU-003
• Manufacturer: NTY
• Name: NTY ECM-AU-003

Lisainfo: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5 Additional information: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5

• Number of pins: 3
• Fabrication Number: ECP-VW-010
• Manufacturer: NTY

• General Information: Boost pressure sensor
• Manufacturer: VIKA

• Number of pins: 4
• for OE number: 036 906 051 C
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• General Information: Camshaft position sensor
• Manufacturer: VIKA

• Required quantity: 2
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: D Shape
• Number of pins: 3
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Resistor [Ohm]: 13
• Height [mm]: 23.8
• Manufacturer: VERNET

• for OE number: 06C 905 163 B
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Length [mm]: 60
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of connectors: 3
• for OE number: 06C 905 163 B
• Colour: black
• Shape: straight
• Number of pins: 3
• Rated Voltage [V]: 12
• Fitting Depth [mm]: 24
• Supplementary Article/Info 2: without cable, with seal ring
• Connector Shape: D Shape
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• General Information: Crankshaft position sensor
• Manufacturer: VIKA

• Fitting Position: Intake Side
• Required quantity: 2
• Engine Code: BBJ
• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour Coding: light blue
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: BBJ
• Number of pins: 3
• Name: DE SS10769-12B1
• Manufacturer: DELPHI

• Engine Code: BBJ
• Alternatively:
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP

• for OE number: 06C905163B
• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black/blue
• Manufacturer: BREMI

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: Gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Engine Code: BBJ
• Guarantee: 5 years guarantee
• Number of pins: 3
• Sensor Type: Hall Sensor
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Engine Code: BBJ
• for OE number: 036906051C
• Colour: black
• Alternatively:
• Number of pins: 4
• Alternative Repair Kit: 550491
• Manufacturer: ERA

• General Information: Pressure difference sensor
• Manufacturer: VIKA

• Length [mm]: 59.9
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Technical Information: Please note colour of connector
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BBJ
• Required quantity: 1
• Housing Colour: black
• Length [mm]: 650
• Manufacturer: EPS

• Engine Code: BBJ
• Pressure from [kPA]: 17
• Pressure to [kPA]: 117
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.226
• Manufacturer: EPS

• Engine Code: BBJ
• Pressure from [kPA]: 17
• Pressure to [kPA]: 117
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Fitting Position: before catalytic converter
• Manufacturer Restriction: VAG
• Number of pins: 6
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Socket Width [mm]: 2.8
• Contact surface: Tin-plated
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, tagatuli
• Manufacturer: HBE

• Cable Length [mm]: 460
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE AS10215

• Engine Code: BBJ
• Required quantity: 1
• Housing Colour: blue
• Length [mm]: 570
• Name: EP 1.957.048
• Manufacturer: EPS

• Number of pins: 3
• Fitting Depth [mm]: 24
• Weight [kg]: 0.031
• Manufacturer: ERA

• General Information: fuel pressure regulator
• Manufacturer: BORSEHUNG

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.09
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV909
• Manufacturer: ESEN SKV

• Cable Length [mm]: 570
• Number of pins: 3
• Housing Colour: blue
• Manufacturer: FAE

• Oxygen Sensor: Diagnostic Probe, Finger-type Sensor
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Transmission Type: Manual Transmission
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: for cylinder 1-3, after catalytic converter, for cylinder 4-6

• Fitting Position: after catalytic converter
• Cable Length [mm]: 816
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20374-12B1

• Fabrication Number: EPP-AU-034
• Manufacturer: NTY

• Voltage [V]: 12
• Fabrication Number: EPP-AU-032
• Manufacturer: NTY

• Oxygen Sensor: Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, for cylinder 1-3, for cylinder 4-6

• Length [mm]: 510
• Number of pins: 5
• Oxygen Sensor: Regulating Sensor
• Manufacturer: JP GROUP
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Oxygen Sensor: Diagnostic Probe
• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: black
• Cable Length [mm]: 1,050
• for OE number: 022906262BJ
• Manufacturer: MEAT&DORIA

• Transmission Type: Automatic Transmission
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV ESEN

• Engine Code: BBJ
• Fitting Position: Left, Right, after catalytic converter
• Required quantity: 2
• Cable Length [mm]: 1,300
• Conductor Number: 4
• Supplementary Article/Info 2: with fastening material
• Available as universal article as well, see article no.: 1.998.235
• Number of circuits: 4
• Name: EP 1.998.245
• Manufacturer: EPS

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased

• Transmission Type: Automatic Transmission
• Fitting Position: after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Length [mm]: 570
• Number of pins: 4
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Diagnostic Probe, Planar Sensor, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 079906265A, 022906262AB
• Thread Size: M18x1.5
• Cable Length [mm]: 800
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 111
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
A6 (4F2, C6), 05.04-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A6 (4F2, C6), 05.04-
(kvaliteediklass: Q)"

• General Information: Air mass meter
• Manufacturer: VIKA

Manufacturer: MAGNETI MARELLI

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 800
• Number of pins: 6
• Manufacturer: FAE
• Additional information: 75357 FAE
• Lisainfo: 75357 FAE

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 5
• Name: OHUMASSIMOOTJA
• Manufacturer: BRM
• Additional information: FE30097
• Lisainfo: FE30097

• Fitting Position: before catalytic converter
• Cable Length [mm]: 950
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor, Heated

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 520
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV868

• Oxygen Sensor: Regulating Sensor, Switching-type Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 630
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.16
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV858

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 1,070
• Guarantee: 3 years guarantee
• Number of circuits: 5
• Weight [kg]: 0.2
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV851
• Manufacturer: ESEN SKV

• Engine Code: BBJ
• Fitting Position: before catalytic converter
• Oxygen Sensor: Heated
• Voltage [V]: 12
• Conductor Number: 5
• Cable Length [mm]: 800
• Name: Lambda andur
• Manufacturer: PIE

• Oxygen Sensor: Regulating Sensor, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 5
• Cable Length [mm]: 600
• Quality: OE EQUIVALENT
• for OE number: 06A906262AE
• Manufacturer: MEAT & DORIA

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Manufacturer: DELPHI ELEKTRONIKA

• Oxygen Sensor: Switching-type Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV908
• Manufacturer: ESEN SKV

• Oxygen Sensor: Unheated
• Number of pins: 5
• Cable Length [mm]: 600
• for OE number: 1K0998262H
• Manufacturer: MEAT&DORIA

• Engine Code: BBJ
• General Information: Sold in Hitachi brand: printing and packaging
• Manufacturer: HUCO
• Name: HI 2505075

• Engine Code: BBJ
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Name: Ohumassimootja
• Manufacturer: HUC

• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.