Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: BMN
- Inner Diameter [mm]: 43.95
-
Lisainfo: Seal,
turbo air hose -
Additional information: Seal,
turbo air hose
- Inner Diameter [mm]: 57.85
-
Lisainfo: Seal,
turbo air hose -
Additional information: Seal,
turbo air hose
- Braking/Drive Dynamics: for vehicles without ABS
- Model Year to: 2008
- Inner Diameter [mm]: 58.5
-
Name: Rongastihend,
ohulaadevoolik - Manufacturer: MAX
- Braking/Drive Dynamics: for vehicles without ABS
-
for PR number: G0K,
G0L, G1A, T71, T9G -
Name: Rongastihend,
ohulaadevoolik - Manufacturer: MAX
- Braking/Drive Dynamics: for vehicles without ABS
- Inner Diameter [mm]: 61.8
-
Name: Rongastihend,
ohulaadevoolik - Manufacturer: MAX
- Model Year to: 2008
-
for combined PR number: TG0,
TM0, TN0 - Weight [kg]: 0.003
- Packaging length [cm]: 5.3
- Packaging width [cm]: 5.3
- Packaging height [cm]: 0.5
- Inner Diameter [mm]: 44
- Outer Diameter [mm]: 53
- Manufacturer: FEBEST
- Inner Diameter [mm]: 57.85
-
Material: FPM
(fluoride rubber) - Manufacturer: ELRING
- Engine Code: BMN
- Inner Diameter [mm]: 57.85
- Name: DRM 01815
- Manufacturer: DR.MOTOR AUTOMOTIVE
- Model Year to: 2007
- Weight [kg]: 0.005
- Inner Diameter [mm]: 58
- Packaging length [cm]: 6.9
- Packaging width [cm]: 6.9
- Packaging height [cm]: 0.5
- Manufacturer: FEBEST
- for OE number: 3C0145117J
- Weight [g]: 11
- Name: IM 20280
- Manufacturer: ORIGINAL IMPERIUM
- Engine Code: BMN
- Quantity per packing unit: 10
- Diameter [mm]: 44
- Weight [kg]: 0.025
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 1K0 145 838 AH
- Manufacturer: KAMOKA
- for OE number: 3C0145117H
- Weight [g]: 13
- Name: IM 20281
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 3C0145117F
- Weight [g]: 12
- Name: IM 20282
- Manufacturer: ORIGINAL IMPERIUM
- Model Year from: 2009
-
for combined PR number: D91,
D93, D94 - Weight [kg]: 0.005
- Inner Diameter [mm]: 62
- Packaging length [cm]: 6.9
- Packaging width [cm]: 6.9
- Packaging height [cm]: 0.5
- Manufacturer: FEBEST
- Engine Code: BMN
- Quantity per packing unit: 10
- Diameter [mm]: 56
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: CFGB
-
Turbocharger Line: Cold Side,
Piping to engine block - Hose Length [mm]: 150
- Inner Diameter 1 [mm]: 55
- Inner Diameter 2 [mm]: 55
- Manufacturer: DENCKERMANN FILTRY
- Material: Rubber with fabric lining
-
Fabrication Number: GPP-
VW- 014 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: CBBB
-
Turbocharger Line: Hot Side,
Turbocharger to piping - Hose Length [mm]: 105
- Inner Diameter 1 [mm]: 48
- Inner Diameter 2 [mm]: 48
- Manufacturer: DENCKERMANN FILTRY
- Engine Code: CBBB
-
Turbocharger Line: Piping to engine block,
Cold Side - Fitting Position: Right Rear
- Colour: black
-
Material: PE
(Polyethylene) -
Cooling Hose: Piping to engine block,
Cold Side - Inner Diameter 1 [mm]: 57
- Inner Diameter 2 [mm]: 53
- Guarantee: 3 years guarantee
- Weight [kg]: 0.23
- Hose Length [mm]: 165
-
Suitable for vehicle type: PC
(passenger car) - Always compare old and new part (in particular OE No.):
- Name: CE 24SKV646
- Manufacturer: ESEN SKV
-
Production date from: 01/
09 -
Production date to: 12/
13 - for OE number: 5N0145838
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: SAS
-
Production date from: 01/
09 -
Production date to: 12/
13 - for OE number: 1K0145838AH
- Manufacturer: SASIC
-
Fitting Position: Left,
Upper - for OE number: 1K0 145 828 T
- Name: Laadimisohu voolik
- Manufacturer: MAX
- General Information: pressure hose
- Manufacturer: VIKA
- for OE number: 1K0 145 834 AP
- Manufacturer: KAMOKA
- Material: Rubber
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Fabrication Number: GPP-
VW- 071 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 1K0145838AH
- Name: Laadimisohu voolik
- Manufacturer: MAX
- for OE number: 1K0145828S
-
Fitting Position: Upper,
Left - Length [mm]: 117
- Outer Diameter 1 [mm]: 55
- Outer Diameter 2 [mm]: 58
- Name: Laadimisohu voolik
- Manufacturer: MAX
- for OE number: 1K0145832AC
-
Fitting Position: Charge Air Cooler,
Left - Length [mm]: 346
- Outer Diameter 1 [mm]: 62
- Outer Diameter 2 [mm]: 68
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: MAX
- Fitting Position: Upper Left
- Connection Diameter (pressure side) [mm]: 57
- Connection Diameter (suction side) [mm]: 57
- Manufacturer: YSPARTS
- Engine Code: CFGB
-
Turbocharger Line: Turbocharger to piping,
Hot Side - Fitting Position: behind exhaust turbocharger
- Colour: black
- Material: Silicone
- Inner Diameter 1 [mm]: 49
- Inner Diameter 2 [mm]: 48
- Guarantee: 3 years guarantee
- Weight [kg]: 0.16
- Hose Length [mm]: 90
-
Suitable for vehicle type: PC
(passenger car) - Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 43SKV215
- Quantity per packing unit: 5
-
Shape: O-
Ring - Inner Diameter [mm]: 58
- Thickness [mm]: 4.5
-
Material: FPM
(fluoride rubber) - Alternatively:
- Material: Rubber with fabric lining
-
Fabrication Number: GPP-
AU- 047 - Manufacturer: NTY
-
Name: NTY GPP-
AU- 047
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Production date to: 07/
12 - Fitting Position: Outlet
- for OE number: 1K0145828S
- Manufacturer: SASIC
-
Fitting Position: Charge Air Cooler,
Upper Right - Supplementary Article/Info 2: with clamps
- Manufacturer: NRF
- for OE number: 3C0 145 828 F
- Manufacturer: KAMOKA
- Fitting Position: Left Rear
- Colour: black
-
Material: ACM
(Polyacrylate) -
Cooling Hose: Turbocharger to piping,
Hot Side - Inner Diameter 1 [mm]: 48
- Inner Diameter 2 [mm]: 48
- Guarantee: 3 years guarantee
- Weight [kg]: 0.14
- Hose Length [mm]: 105
-
Suitable for vehicle type: PC
(passenger car) - Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 24SKV175
- Material: Rubber with fabric lining
-
Fabrication Number: GPP-
VW- 015 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 1K0145832Q
- Manufacturer: KAMOKA
- Inner Diameter 1 [mm]: 48
- Inner Diameter 2 [mm]: 48
-
Fitting Position: Charge Air Cooler,
Outlet - for OE number: 1K0145828T
- Supplementary Article/Info 2: with clamps
- Name: Laadimisohu voolik
- Manufacturer: NRF
- Length [mm]: 385
- Inner Diameter 1 [mm]: 60
- Inner Diameter 2 [mm]: 55
-
Fitting Position: Charge Air Cooler,
Outlet - Supplementary Article/Info 2: with clamps
- Manufacturer: NRF
- Engine Code: BMN
- Quantity per packing unit: 5
- Inner Diameter [mm]: 43.95
- Quantity: 5
-
Name: Rongastihend,
ohulaadevoolik - Manufacturer: DRM
- Inner Diameter 1 [mm]: 48
- Inner Diameter 2 [mm]: 48
-
Fitting Position: Charge Air Cooler,
Outlet - Supplementary Article/Info 2: with clamps
- Name: Laadimisohu voolik
- Manufacturer: NRF
- Length [mm]: 346
- for OE number: 1K0145832AC
-
Fitting Position: Charge Air Cooler,
Left - Outer Diameter 1 [mm]: 62
- Outer Diameter 2 [mm]: 68
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: BUG
- General Information: pressure hose
- Manufacturer: VIKA
- Fitting Position: Outlet
- for OE number: 1K0145828T
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: SAS
-
Engine Code: CFGB,
CBBB - Block Separation:
-
Vehicle Identification Number (VIN) from: 8P-
9A066207, 8P- 9B012653 -
Fitting Position: Left,
Lower - Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
- Fitting Position: Right Rear
- Colour: black
-
Material: PE
(Polyethylene) -
Cooling Hose: Piping to engine block,
Cold Side - Inner Diameter 1 [mm]: 55
- Inner Diameter 2 [mm]: 55
- Guarantee: 3 years guarantee
- Weight [kg]: 0.16
- Hose Length [mm]: 150
-
Suitable for vehicle type: PC
(passenger car) - Always compare old and new part (in particular OE No.):
- Name: CE 24SKV733
- Manufacturer: ESEN SKV
- Fitting Position: Lower Left
- Manufacturer: YSPARTS
- for OE number: 5N0145828E
- Material: Silicone
- Weight [g]: 134
- Length [mm]: 103
- Inner Diameter 1 [mm]: 49
- Inner Diameter 2 [mm]: 48
- Name: IM 223735
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 1K0145832AC
- Weight [g]: 410
- Length [mm]: 304
- Inner Diameter 1 [mm]: 60
- Inner Diameter 2 [mm]: 54
- Name: Laadimisohu voolik
- Manufacturer: IMP
- Fitting Position: Right Rear
- Length [mm]: 100
- Colour: black
-
Material: ACM
(Polyacrylate) -
Cooling Hose: Turbocharger to piping,
Hot Side - Inner Diameter 1 [mm]: 48
- Inner Diameter 2 [mm]: 55
- Guarantee: 3 years guarantee
- Weight [kg]: 0.18
- Always compare old and new part (in particular OE No.):
- Name: CE 24SKV047
- Manufacturer: ESEN SKV
- General Information: pressure hose
- Manufacturer: VIKA
-
Engine Code: CBBB,
CFGB -
Vehicle Identification Number (VIN) from: 8P-
9A066 207, 8P- 9B012 653 -
Turbocharger Line: Cold Side,
Charge air cooler to piping - Block Separation:
-
Material: PE
(Polyethylene) - Colour: black
- Hose Length [mm]: 345
- Inner Diameter 1 [mm]: 60
- Inner Diameter 2 [mm]: 55
- Observe broschure:
- Name: Laadimisohu voolik
- Manufacturer: GAT
- Engine Code: CFGB
-
Turbocharger Line: Cold Side,
Piping to engine block -
Material: PE
(Polyethylene) - Colour: black
- Hose Length [mm]: 150
- Inner Diameter 1 [mm]: 55
- Inner Diameter 2 [mm]: 55
- Observe broschure:
- Name: Laadimisohu voolik
- Manufacturer: GAT
- for OE number: 5N0145838
- Supplementary Article/Info 2: with clamps
- Manufacturer: NRF
- Engine Code: BMN
-
Turbocharger Line: Cold Side,
Piping to engine block - Hose Length [mm]: 176
- Inner Diameter 1 [mm]: 55
- Inner Diameter 2 [mm]: 37
- Manufacturer: DENCKERMANN FILTRY
- Fitting Position: Right
- Length [mm]: 385
- Colour: black
-
Material: PE
(Polyethylene) - Inner Diameter 1 [mm]: 55
- Inner Diameter 2 [mm]: 55
- Guarantee: 3 years guarantee
- Weight [kg]: 0.41
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 43SKV112
-
Production date to: 07/
12 -
Fitting Position: Charge Air Cooler,
Inlet - for OE number: 1K0145832AC
- Manufacturer: SASIC
- Engine Code: CFGB
- Fitting Position: Left
- Name: Laadimisohu voolik
- Manufacturer: MEY
Material: Aramid, FKM (fluorocarbon rubber), FVMQ [fluorosilicone rubber)
- Length [mm]: 385
- for OE number: 1K0145834AP
-
Fitting Position: Charge Air Cooler,
Right - Outer Diameter 1 [mm]: 64
- Outer Diameter 2 [mm]: 70
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: BUG
- Engine Code: CFGB
-
Turbocharger Line: Hot Side,
Turbocharger to piping - Material: Silicone
- Colour: black
- Hose Length [mm]: 90
- Inner Diameter 1 [mm]: 49
- Inner Diameter 2 [mm]: 48
- Observe broschure:
- Name: Laadimisohu voolik
- Manufacturer: GAT
- Material: Rubber with fabric lining
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
-
Fitting Position: Charge Air Cooler,
Outlet - for OE number: 1K0145834AP
- Name: Laadimisohu voolik
- Manufacturer: MAX
-
Production date from: 01/
09 -
Production date to: 12/
13 -
Fitting Position: Charge Air Cooler,
Outlet - for OE number: 1K0145834AP
- Manufacturer: SASIC
- Engine Code: BMN
- Length [mm]: 280
- Fitting Position: Throttle Housing
- Manufacturer: DENCKERMANN FILTRY
- Length [mm]: 185
- for OE number: 1K0 145 838 AH
-
Fitting Position: Throttle Housing,
Upper - Outer Diameter [mm]: 65
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: BUG
- for OE number: 3C0 145 838 B
- Manufacturer: KAMOKA
-
Fitting Position: Charge Air Cooler,
Inlet - Supplementary Article/Info 2: with clamps
- Name: Laadimisohu voolik
- Manufacturer: NRF
- General Information: pressure hose
- Manufacturer: VIKA
- for OE number: 1K0145834AP
- Weight [g]: 405
- Length [mm]: 289
- Inner Diameter 1 [mm]: 57
- Inner Diameter 2 [mm]: 54
- Name: IM 221924
- Manufacturer: ORIGINAL IMPERIUM
- Length [mm]: 117
-
Material: ACM
(Polyacrylate) - for OE number: 1K0145828S
-
Fitting Position: Upper,
Left - Supplementary Article/Info 2: with clamps
- Outer Diameter 1 [mm]: 55
- Outer Diameter 2 [mm]: 58
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: BUG
- Engine Code: CBBB
-
Turbocharger Line: Hot Side,
Turbocharger to piping -
Material: ACM
(Polyacrylate) - Colour: black
- Hose Length [mm]: 105
- Inner Diameter 1 [mm]: 48
- Inner Diameter 2 [mm]: 48
- Observe broschure:
- Name: Laadimisohu voolik
- Manufacturer: GAT
-
Fabrication Number: GPP-
VW- 110 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Charge Air Cooler,
Right - Supplementary Article/Info 2: with clamp
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- for OE number: 3C0 145 832 J
- Manufacturer: KAMOKA
- for OE number: 1K0145838AH
- Name: Laadimisohu voolik
- Manufacturer: MD
- Fitting Position: Left
- Name: Laadimisohu voolik
- Manufacturer: MAX
-
Engine Code: CBBB,
CFGB -
Vehicle Identification Number (VIN) from: 8P-
9A066207, 8P- 9B012653 - Block Separation:
-
Fitting Position: Right,
Lower, Charge Air Cooler -
Material: AEM
(Ethylene Acrylate Rubber) - Name: Laadimisohu voolik
- Manufacturer: MEY
-
Engine Code: CBBB,
CFGB -
Vehicle Identification Number (VIN) from: 8P-
9A- 066 207, 8P- 9B- 012 653 - Block Separation:
- Fitting Position: Right
- Weight [kg]: 0.41
- Weight [g]: 410
- Supplementary Article/Info 2: without clamps
- Manufacturer: METALCAUCHO
- Engine Code: CBBB
-
Turbocharger Line: Cold Side,
Piping to engine block -
Material: PE
(Polyethylene) - Colour: black
- Hose Length [mm]: 165
- Inner Diameter 1 [mm]: 56.5
- Inner Diameter 2 [mm]: 52.5
- Observe broschure:
- Manufacturer: GATES
- for OE number: 3C0145834F
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- General Information: pressure hose
- Manufacturer: VIKA
-
Fabrication Number: GPP-
VW- 088 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: BMN
- Construction Year to: 05.2007
- Fitting Position: Left
- Cooling Hose: Charge air cooler to piping
- Manufacturer: JP GROUP
- Lisainfo: Charger Intake Hose
- Additional information: Charger Intake Hose
- General Information: pressure hose
- Manufacturer: VIKA
-
Fitting Position: Left Front,
Lower Left - Supplementary Article/Info 2: with clamp
- Outer Diameter 1 [mm]: 68
- Outer Diameter 2 [mm]: 62
- Inner Diameter 1 [mm]: 59
- Inner Diameter 2 [mm]: 53
- Guarantee: 3 years guarantee
- Turbocharger Line: Piping to charge air cooler
- Weight [kg]: 0.38
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 24SKV048
- Turbocharger Line: Turbocharger to piping
- Material: Rubber with fabric lining
- Supplementary Article/Info 2: with clamp
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: BMN
- Fitting Position: Left Rear
-
Cooling Hose: Piping to engine block,
Cold Side - Guarantee: 3 years guarantee
- Weight [kg]: 0.23
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Engine Code: BMN
- Fitting Position: Throttle Housing
- Length [mm]: 280
- Material: Rubber with fabric lining
- Guarantee: 3 years guarantee
- Weight [kg]: 0.31
- Always compare old and new part (in particular OE No.):
- Name: CE 43SKV482
- Manufacturer: ESEN SKV
-
Fitting Position: Charge Air Cooler,
Left - Name: Laadimisohu voolik
- Manufacturer: MAX
- for OE number: 1K0 145 828 T
- Fitting Position: Left
- Supplementary Article/Info 2: with clamps
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: BUG
- Engine Code: CFGB
- Weight [kg]: 0.15
- Weight [g]: 150
- Manufacturer: METALCAUCHO
-
Engine Code: CBBB,
CFGB -
Vehicle Identification Number (VIN) from: 8P-
9A066 201, 8P- B- 012 653 -
Turbocharger Line: Hot Side,
Piping to charge air cooler - Block Separation:
-
Material: PE
(Polyethylene) - Colour: black
- Hose Length [mm]: 310
- Inner Diameter 1 [mm]: 60
- Inner Diameter 2 [mm]: 54
- Observe broschure:
- Name: Laadimisohu voolik
- Manufacturer: GAT
- for OE number: 1K0145834AP
- Name: Laadimisohu voolik
- Manufacturer: MD
- General Information: pressure hose
- Manufacturer: VIKA
- General Information: pressure hose
- Manufacturer: VIKA
- for OE number: 1K0145834T
- Name: Laadimisohu voolik
- Manufacturer: NRF
- for OE number: 3C0145832J
- Material: Rubber
- Supplementary Article/Supplementary Info: with pipe socket
- Weight [g]: 403
- Plug connector manufacturer: HENN
- Length [mm]: 316
- Inner Diameter 1 [mm]: 53
- Inner Diameter 2 [mm]: 55
- Name: Laadimisohu voolik
- Manufacturer: IMP
-
Engine Code: BMN,
CBBB, CFGB - Material: Rubber
- for OE number: 3C0145838B
- Supplementary Article/Info 2: with clamp
- Name: Laadimisohu voolik
- Manufacturer: BUG
- Supplementary Article/Supplementary Info: with pipe socket
- Weight [g]: 413
- Plug connector manufacturer: HENN
- Inner Diameter 1 [mm]: 58
- Inner Diameter 2 [mm]: 55
- Name: IM 222010
- Manufacturer: ORIGINAL IMPERIUM
- Colour: black
-
Material: AEM
(Ethylene Acrylate Rubber) - Inner Diameter 1 [mm]: 56
- Inner Diameter 2 [mm]: 51
- Guarantee: 3 years guarantee
- Weight [kg]: 0.49
- Hose Length [mm]: 340
-
Suitable for vehicle type: PC
(passenger car) - Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 43SKV425
- for OE number: 1K0145832Q
- Name: Laadimisohu voolik
- Manufacturer: NRF
- Guarantee: 3 years guarantee
- Weight [kg]: 0.42
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Fitting Position: Lower Right
- Compression ring material: Stainless Steel
- for OE number: 1K0 145 834 T
- Material: Rubber with fabric lining
- Weight [kg]: 0.418
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) from: 8P-
9A066 201, 8P- B- 012 653 -
Engine Code: CBBB,
CFGB - Block Separation:
-
Fitting Position: Charge Air Cooler,
Left, Lower - Supplementary Article/Info 2: with clamps
- Article number of recommended accessories: 2400581
- Manufacturer: METZGER
- Engine Code: CBBB
-
Vehicle Identification Number (VIN) to: 8P-
9A066 206, 8P- 9B012 652 -
Turbocharger Line: Cold Side,
Charge air cooler to piping -
Material: PE
(Polyethylene) - Colour: black
- Hose Length [mm]: 335
- Inner Diameter 1 [mm]: 56
- Inner Diameter 2 [mm]: 52
- Observe broschure:
- Manufacturer: RAPRO
- Engine Code: BMN
- Fitting Position: Lower Right
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 1K0145770N
- Weight [g]: 508
- Name: IM 223863
- Manufacturer: ORIGINAL IMPERIUM
- Engine Code: CBBB
-
Vehicle Identification Number (VIN) to: 8P-
9A066 206, 8P- 9B012 652 -
Turbocharger Line: Cold Side,
Charge air cooler to piping -
Material: PE
(Polyethylene) - Colour: black
- Hose Length [mm]: 335
- Inner Diameter 1 [mm]: 56
- Inner Diameter 2 [mm]: 52
- Observe broschure:
- Manufacturer: GATES
- for OE number: 3C0145832J
- Supplementary Article/Info 2: with clamps
- Name: Laadimisohu voolik
- Manufacturer: NRF
- Fitting Position: Left
- for article number: 3C0145832J
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: BUG
- for OE number: 3C0145828F
- Fitting Position: Left
- Supplementary Article/Info 2: with clamp
- Name: KOMPRESSORIOHUVOOLIK
- Manufacturer: BUG
-
Fitting Position: Left,
engine sided, Exhaust Turbocharger -
Supplementary Article/Supplementary Info: with quick coupling,
with gasket/ seal - Material: FVMQ [fluorosilicone rubber)
- Supplementary Article/Info 2: without clamp
- Hose Type: Moulded Hose
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Weight [kg]: 0.2
- Manufacturer: METALCAUCHO
- Engine Code: BMN
-
Turbocharger Line: Hot Side,
Piping to charge air cooler -
Material: AEM
(Ethylene Acrylate Rubber) - Colour: black
- Hose Length [mm]: 340
- Inner Diameter 1 [mm]: 56
- Inner Diameter 2 [mm]: 51
- Observe broschure:
- Manufacturer: GATES
- Engine Code: BMN
- Turbocharger Line: Turbocharger to charge air cooler
- Material: Silicone
- Supplementary Article/Supplementary Info: with quick coupling
- Supplementary Article/Info 2: without clamp
- Length [mm]: 150
- Manufacturer: METZGER
-
Fabrication Number: GPP-
VW- 094 - Fitting Position: Charge Air Cooler
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: CBBB
-
Vehicle Identification Number (VIN) to: 8P-
9A066 206, 8P- 9B012 652 -
Fitting Position: Charge Air Cooler,
Left, Lower - Supplementary Article/Supplementary Info: with quick coupling
- Supplementary Article/Info 2: without clamp
- Article number of recommended accessories: 2400581
- Manufacturer: METZGER
- Engine Code: BMN
-
Turbocharger Line: Cold Side,
Piping to engine block -
Material: AEM
(Ethylene Acrylate Rubber) - Colour: black
- Hose Length [mm]: 176
- Inner Diameter 1 [mm]: 55
- Inner Diameter 2 [mm]: 37
- Observe broschure:
- Manufacturer: GATES
- Engine Code: CBBB
-
Vehicle Identification Number (VIN) to: 8P-
9A066 206, 8P- 9B012 652 -
Turbocharger Line: Hot Side,
Piping to charge air cooler -
Material: Polychloroprene
(Neoprene) - Colour: black
- Hose Length [mm]: 340
- Inner Diameter 1 [mm]: 57.5
- Inner Diameter 2 [mm]: 55
- Observe broschure:
- Manufacturer: GATES
-
Engine Code: CBBB,
CFGB -
Vehicle Identification Number (VIN) from: 8P-
9A- 066 201, 8P- 9B- 012 653 - Block Separation:
- Fitting Position: both sides
- Weight [kg]: 0.45
- Weight [g]: 450
- Manufacturer: METALCAUCHO
- Quantity per packing unit: 100
-
Shape: O-
Ring - Inner Diameter [mm]: 58
- Thickness [mm]: 4.5
-
Material: FPM
(fluoride rubber)
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks