• Filter type: Filter Insert
• Height [mm]: 136
• Diameter [mm]: 78
• Inner Diameter 2 [mm]: 12
• Manufacturer: JP GROUP
• Lisainfo: Filter element for fuel filter
• Additional information: Filter element for fuel filter

• for PR number: 1KD
• Fitting Position: Rear Axle
• Brake System: Lucas
• Height [mm]: 53
• Width [mm]: 87
• Thickness [mm]: 17.2
• Wear Warning Contact: not prepared for wear warning indicator
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, rear, 17.2 mm
  PR:1KD,1KU
  
• Additional information: Brake pad set, rear, 17.2 mm
  PR:1KD,1KU
  

• Fitting Position: Rear Axle
• Brake System: Lucas
• Height [mm]: 53
• Width [mm]: 87
• Thickness [mm]: 15.2
• Wear Warning Contact: not prepared for wear warning indicator
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, rear, 15.2 mm
• Additional information: Brake pad set, rear, 15.2 mm

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Height [mm]: 136
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 78
• SVHC: No SVHC present!
• Manufacturer: MANN FILTRY
• Lisainfo: PU 825 X MAN
• Additional information: PU 825 X MAN

• Fitting Position: Rear Axle
• Brake System: Lucas
• Height [mm]: 55.9
• Width [mm]: 106
• Thickness [mm]: 17.2
• Wear Warning Contact: prepared for wear warning indicator
• Manufacturer: JP GROUP

Lisainfo: Brake pad set, rear, 17.2 mm Anduri paigaldus võimalus Pikkus 105,5 mm Additional information: Brake pad set, rear, 17.2 mm Anduri paigaldus võimalus Pikkus 105,5 mm

• for PR number: 1KE, 1KZ
• Fitting Position: Rear Axle
• Brake System: LUCAS/TRW
• Height [mm]: 55.9
• Width [mm]: 105
• Thickness [mm]: 17.1
• Vehicle Equipment: for vehicles without electric parking brake
• Wear Warning Contact: prepared for wear warning indicator
• Manufacturer: JP GROUP
• Lisainfo: 17.2 mm, ilma kulumis andurita
• Additional information: 17.2 mm, ilma kulumis andurita

• for PR number: 1ZC, 1ZF, 1ZM
• Fitting Position: Front Axle
• Brake System: Teves
• Height [mm]: 54.7
• Width [mm]: 146
• Thickness [mm]: 19.7
• Wear Warning Contact: with integrated wear warning contact
• Manufacturer: JP GROUP

Lisainfo: Brake pad set, front, 19.6 mm, without anti-squeak plates PR:T1Q,T0U, T94,T60 Additional information: Brake pad set, front, 19.6 mm, without anti-squeak plates PR:T1Q,T0U, T94,T60

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4840A, GAT4844
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Manufacturer: GATES
• Lisainfo: KP25649XS-1 GAT
• Additional information: KP25649XS-1 GAT

• Filter type: Filter Insert
• Height [mm]: 137
• Fuel Type: Diesel
• Outer Diameter [mm]: 79
• Manufacturer: KAMOKA
• Lisainfo: F303901
• Additional information: F303901

• Filter type: Filter Insert
• Length [mm]: 137
• Outer Diameter [mm]: 77
• Inner Diameter [mm]: 11
• Technical Information Number: UFI system
• Manufacturer: ASHIKA-FILTRY
• Lisainfo: 30-ECO024
• Additional information: 30-ECO024

• Filter type: Filter Insert
• Length [mm]: 137
• Outer Diameter [mm]: 77
• Inner Diameter [mm]: 11
• Technical Information Number: UFI system
• Manufacturer: JAPKO

• Filter type: Filter Insert
• Height [mm]: 136.5
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 78
• Manufacturer: JPN

• Filter type: Filter Insert
• Height [mm]: 136
• Manufacturer: DENCKERMANN FILTRY

• Filter type: In-Line Filter
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• for OE number: 46473803
• Height [mm]: 195
• Fuel Type: Diesel
• Outer Diameter [mm]: 88
• Manufacturer: KAMOKA

• Filter type: Filter Insert
• Height [mm]: 136
• Diameter [mm]: 79
• Sealing Ring Diameter [mm]: 12
• Inner Diameter 1 [mm]: 12
• Manufacturer: DELLO AUTOMEGA

• Quantity per packing unit: 20
• Outer Diameter [mm]: 78.5
• Inner Diameter [mm]: 11.5
• Height [mm]: 135
• Filter type: Filter Insert
• Manufacturer: SCT MANNOL

• Height [mm]: 138.5
• Outer Diameter 1 [mm]: 77
• Inner Diameter 1 [mm]: 11
• Filter type: Filter Insert
• Name: CFD DFF0200
• Manufacturer: DACO

• Filter type: Filter Insert
• Height [mm]: 136
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 79
• Lisainfo: (kvaliteediklass: PJ)
• Name: Fuel filter
• Quality class: PJ
• Additional information: (kvaliteediklass: PJ)

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 78
• Height [mm]: 137
• Filter type: Filter Insert
• Name: BM FE0154
• Manufacturer: BREMSI

• Filter type: Filter Insert
• Inner Diameter [mm]: 11
• Height [mm]: 137
• Outer Diameter [mm]: 78
• Sealing Ring Diameter [mm]: 74
• Weight [kg]: 0.166
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: BLUE PRINT
• Additional information: ADV182301
• Lisainfo: ADV182301

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Manufacturer Restriction: UFI
• Inner Diameter [mm]: 11
• Height [mm]: 137
• Outer Diameter [mm]: 78
• Sealing Ring Diameter [mm]: 74
• Weight [kg]: 0.166
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Filter Insert
• Outer Diameter 1 [mm]: 78
• Inner Diameter 1 [mm]: 12
• Inner Diameter 2 [mm]: 28
• Height [mm]: 136
• Manufacturer: KOLBENSCHMIDT

• Filter type: Filter Insert
• Supplementary Article/Supplementary Info: with gasket/seal
• Outer Diameter [mm]: 79
• Height [mm]: 138
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Height [mm]: 137
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 79
• Packing Type: Box
• Filter type: Filter Insert
• Packaging length [cm]: 8.5
• Packaging width [cm]: 8.5
• Packaging height [cm]: 16
• Name: CH CFF100523
• Manufacturer: CHAMPION

• Filter type: Filter Insert
• Height [mm]: 139
• Outer Diameter [mm]: 79
• Outer Diameter 1 [mm]: 77
• Inner Diameter 1 [mm]: 11
• Inner Diameter 2 [mm]: 11
• Name: VA 587904
• Manufacturer: VALEO

• Engine Code: CAYB
• Height [mm]: 136
• Fuel Type: Diesel
• Filter type: Filter Insert
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 78
• Manufacturer: MAGNETI MARELLI
• Name: MM 71760751
• Additional information: 153071760751
• Lisainfo: 153071760751

• Height [mm]: 195
• Fuel Type: Diesel
• Outer Diameter 1 [mm]: 80
• Outer Diameter [mm]: 88
• Height 1 [mm]: 177
• Inlet Ø [mm]: 8
• Outlet Ø [mm]: 8
• Weight [kg]: 0.407
• Filter type: In-Line Filter
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Filter type: Filter Insert
• Fuel Type: Diesel
• General Information: fuel filter; diesel; composite paper core
• Manufacturer: VIKA

• Width [mm]: 29
• Material: Metal
• Outer Diameter [mm]: 40
• Manufacturer: KAMOKA

• Filter type: Filter Insert
• Diameter [mm]: 78
• Inner Diameter [mm]: 11
• Height [mm]: 136
• for OE number: 3C0127434
• Manufacturer: MEAT & DORIA

• Fitting Position: Rear Axle
• for PR number: 1KD, 1KQ
• Quantity per packing unit: 4
• Height [mm]: 52.9
• Thickness [mm]: 17
• Width [mm]: 87
• Brake System: TRW
• Supplementary Article/Info 2: with bolts/screws
• Name: LPR 05P634
• Manufacturer: LPR
• Additional information: 05P634
• Lisainfo: 05P634

• for PR number: 1KD
• Fitting Position: Rear Axle
• Thickness [mm]: 17
• Length [mm]: 87
• Width [mm]: 53
• Brake System: TRW Lucas
• WVA Number: 20961
• Manufacturer: ASHIKA-KLOCKI

• Filter type: Filter Insert
• Height [mm]: 139
• Inner Diameter [mm]: 11
• Outer Diameter [mm]: 77
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Brake System: Girling-Lucas
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 53.1
• Wear Warning Contact: excl. wear warning contact
• Vibration: with vibration damper
• Width 1 [mm]: 87.2
• Thickness 1 [mm]: 17
• Manufacturer: METELLI UKL.HAMULCOWY

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 253
• for PR number: 1KD
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 17
• Wear Warning Contact: not prepared for wear warning indicator
• Brake Pad: With bevelled edges
• Observe technical data:
• Manufacturer: AUTO-GH

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs

• for PR number: 1KE, 1KZ
• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles with electric parking brake
• Width 1 [mm]: 105.2
• Height [mm]: 56.4
• Thickness [mm]: 16.9
• Brake System: Lucas / TRW
• Test Mark: ECE R90
• Manufacturer: ABAKUS LORO

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Driven Units: Oil Pump
• Tensile Cord Material: Fiberglass
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• Engine Timing: Timing belt in the oil bath
• Colour: black/white
• Number of Teeth: 59
• Width [mm]: 9.4
• Tooth Pitch [mm]: 7.43
• Length [mm]: 438
• Manufacturer: GATES

• Driven Units: Oil Pump
• Vehicle configuration line / variant: BELT IN OIL -CAYB
• for OE number: 03L115264A
• Number of Teeth: 59
• Width [mm]: 10
• Manufacturer: DAYCO

• Driven Units: Oil Pump
• Number of Teeth: 59
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.066
• Width [mm]: 9.2
• Tooth Pitch [mm]: 7.43
• Length [mm]: 438
• Engine Timing: Timing belt in the oil bath
• Manufacturer: CONTITECH

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 253
• for PR number: 1KD
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 17
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Brake Pad: With bevelled edges
• Observe technical data:
• Manufacturer: AUTO-GH

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs

• Fitting Position: Rear Axle
• Width [mm]: 105
• Thickness [mm]: 17
• Height [mm]: 56
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas - TRW
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle
• Width [mm]: 109
• Thickness [mm]: 17
• Height [mm]: 53
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Bosch
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• for PR number: 1ZF, 1ZM
• Fitting Position: Front Axle
• Width [mm]: 146
• Height [mm]: 54.7
• Thickness [mm]: 19.6
• Warning Contact Length [mm]: 145
• Brake System: Volkswagen
• Test Mark: ECE R90
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for PR number: 1KE, 1KZ
• Fitting Position: Rear Axle
• Width [mm]: 105.3
• Thickness [mm]: 17.1
• Height [mm]: 55.9
• Vehicle Equipment: for vehicles without electric parking brake
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

Wear Warning Contact: prepared for wear warning indicator, excl. wear warning contact

• for PR number: 1KD
• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 17
• Width [mm]: 87
• Height [mm]: 52.9
• Brake System: TRW
• Supplementary Article/Info 2: with brake caliper screws
• Weight [kg]: 0.77
• Manufacturer: TOMEX BRAKES

• Filter type: Filter Insert
• Height [mm]: 137
• Manufacturer: DELPHI
• Name: DE HDF615

• for PR number: 1KD
• Fitting Position: Rear Axle
• Thickness [mm]: 17
• Length [mm]: 87
• Width [mm]: 53
• Brake System: TRW Lucas
• WVA Number: 20961
• Manufacturer: JAPKO

• for PR number: 1KE, 1KZ
• Fitting Position: Rear Axle
• Width [mm]: 105.2
• Thickness [mm]: 16.9
• Height [mm]: 56.4
• Vehicle Equipment: for vehicles with electric parking brake
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN HAMULCE

Wear Warning Contact: not prepared for wear warning indicator, excl. wear warning contact

• for brake disc diameter [mm]: 253
• for PR number: 1KD, 1KQ
• Block Separation:
• Length [mm]: 87
• Width [mm]: 52.9
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with anti-squeak plate
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.8
• Weight [kg]: 0.916
• Observe service information:
• Manufacturer: FEBI BILSTEIN
• Lisainfo: 16488 FEBI
• Additional information: 16488 FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for brake disc diameter [mm]: 253
• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 17
• WVA Number: 20960
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Manufacturer: VALEO
• Name: VA 301463

• for PR number: 1X0, 1KD
• Fitting Position: Rear Axle
• Width [mm]: 87.1
• Height [mm]: 52.8
• Thickness [mm]: 17.2
• Wear Warning Contact: not prepared for wear warning indicator
• Brake System: TRW
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Manufacturer: MEYLE
• Lisainfo: 0252096117
• Additional information: 0252096117

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Filter type: Filter Insert
• Diameter [mm]: 79.5
• Height [mm]: 136.1
• Manufacturer: BOSCH
• Name: BS 1457070008

• Fitting Position: Rear Axle
• Braking System: for vehicles without ceramic brakes
• for PR number: 1KD, 1X0
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 16.6
• Length [mm]: 87
• Height [mm]: 53
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake Pad: With bevelled edges
• Brake System: TRW
• WVA Number: 20961
• Name: SK VKBP90001
• Manufacturer: SKF

• Fitting Position: Rear Axle
• for PR number: 1KE, 1KF, 1KJ, 1KU, 1KZ, 2EA
• Quantity per packing unit: 4
• Height [mm]: 55.5
• Thickness [mm]: 16.9
• Width [mm]: 105.3
• Supplementary Article/Info 2: with bolts/screws
• Brake System: TRW
• Name: LPR 05P1219
• Manufacturer: LPR

• for PR number: 1KS
• Fitting Position: Rear Axle
• Wear Warning Contact: not prepared for wear warning indicator
• Manufacturer Restriction: BOSCH
• Thickness [mm]: 16.5
• Length [mm]: 109.3
• Height [mm]: 53.4
• Manufacturer: JPN

• Fitting Position: Front Axle
• Width [mm]: 147
• Thickness [mm]: 19
• Height [mm]: 55
• Number of wear indicators [per axle]: 1
• Wear Warning Contact: incl. wear warning contact
• Brake System: ATE
• Warning Contact Length [mm]: 155
• Manufacturer: KAMOKA

• for brake disc diameter [mm]: 253
• for PR number: 1KD, 1KQ
• Block Separation:
• Length [mm]: 87
• Width [mm]: 53
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with anti-squeak plate
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Weight [kg]: 0.916
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• for PR number: 1KQ, 1KD
• Quantity per packing unit: 4
• FMSI Code: D1017-7920 D1112-821
• Test Mark: E1 90R-01878/507
• Brake System: TRW
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20960
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.2
• Width 2 [mm]: 87
• Height 1 [mm]: 53
• Height 2 [mm]: 53
• Thickness 1 [mm]: 17
• Thickness 2 [mm]: 17
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP565
• Additional information: LP565 DELPHI
• Lisainfo: LP565 DELPHI

• Fuel Type: Diesel
• Outer Diameter [mm]: 78
• Filter type: Filter Insert
• Inner Diameter [mm]: 12
• Height [mm]: 136
• Weight [kg]: 0.229
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 253
• for PR number: 1KD, 1KQ
• Width 1 [mm]: 87
• Height 1 [mm]: 52.9
• Thickness 1 [mm]: 16.4
• Brake System: LUCAS/TRW
• Wear Warning Contact: without integrated wear sensor
• Weight [kg]: 0.96
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• for brake disc diameter [mm]: 280
• for PR number: 1ZM
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: incl. wear warning contact
• Height [mm]: 54.7
• Width [mm]: 146
• Thickness [mm]: 19.8
• Number of wear indicators [per axle]: 1
• Brake Pad: Without Bevelled Edges
• Warning Contact Length [mm]: 155
• Manufacturer: AUTO-GH

• Filter type: Filter Insert
• Outer Diameter [mm]: 78.5
• Inner Diameter [mm]: 11.5
• Height [mm]: 135
• Manufacturer: HENGST FILTER

• Fitting Position: Rear Axle
• for PR number: 1KD
• Quantity per packing unit: 4
• Width [mm]: 87
• Thickness [mm]: 17
• Height [mm]: 53
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• Brake System: Lucas
• Supplementary Article/Info 2: with brake caliper screws, with anti-squeak plate
• WVA Number: 20961, 23554
• Manufacturer: BREMBO
• Name: BR P 85 020

• Quantity: 1
• Fitting Position: Rear Axle
• Width [mm]: 87
• Thickness [mm]: 17
• Height [mm]: 52.9
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Supplementary Info: with accessories
• General Information: brake pads; rear; without wire
• Manufacturer: VIKA

• for PR number: 1ZF, 1ZM
• Fitting Position: Front Axle
• Width [mm]: 146
• Thickness [mm]: 19.6
• Height [mm]: 54.7
• Wear Warning Contact: incl. wear warning contact
• Brake System: Volkswagen
• Manufacturer: DENCKERMANN HAMULCE

• for brake disc diameter [mm]: 253
• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 17
• Width 2 [mm]: 78
• Height 2 [mm]: 51.3
• Thickness 2 [mm]: 17
• WVA Number: 20960
• Wear Warning Contact: incl. wear warning contact
• Number of wear indicators [per axle]: 1
• Warning Contact Length [mm]: 260
• Operating Mode: Electric
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.02
• Manufacturer: VALEO
• Name: VA 301674

• for brake disc diameter [mm]: 253
• for PR number: 1KD, 1KQ
• Block Separation:
• Length [mm]: 87
• Width [mm]: 52.9
• Test Mark: ECE R90 Approved
• Supplementary Article/Info 2: with anti-squeak plate
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.8
• Weight [kg]: 0.916
• Name: SW 30 91 6488
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle type: EXC S LINE
• for brake disc diameter [mm]: 280
• for PR number: 1ZF
• Fitting Position: Front Axle
• Thickness [mm]: 19.7
• Length [mm]: 146
• Width [mm]: 54.7
• Brake System: ATE
• WVA Number: 23130, 23131, 23187
• Manufacturer: JAPKO

• for PR number: 1ZF, 1ZM
• Fitting Position: Front Axle
• Wear Warning Contact: incl. wear warning contact
• Manufacturer Restriction: ATE
• Thickness [mm]: 19.8
• Length [mm]: 146
• Height [mm]: 54.7
• Number of wear indicators [per axle]: 1
• Warning Contact Length [mm]: 155
• Manufacturer: JPN

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 253
• for PR number: 1KD, 1KQ
• Manufacturer Restriction: TRW
• Thickness [mm]: 15
• Test Mark: R90
• Width [mm]: 87
• Height [mm]: 52.9
• Wear Warning Contact: without integrated wear sensor
• Manufacturer: KAVO PARTS

• Fitting Position: Rear Axle
• General Information: brake pads; rear; without wire
• Manufacturer: VIKA

• Fitting Position: Front Axle
• for PR number: 1ZF, 1ZM
• Quantity per packing unit: 4
• WVA Number: 23130, 23131, 23187
• Test Mark: E1 90R-01881/685
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: without accessories
• Friction Lining Material: Low-Metallic
• Width 1 [mm]: 146
• Height 1 [mm]: 55
• Thickness 1 [mm]: 20
• Name: Brake pads
• Quality class: PJ

Wear Warning Contact: incl. wear warning contact, with integrated wear sensor Lisainfo: "Tootja: SRL
SKODA FABIA COMBI (6
(kvaliteediklass: PJ)"
koos integreeritud kulumi hoiatuskontaktiga
Hoiatuskontakti pikkus (mm): 173,00
WVA-number: WVA 23131
Jämedus 1 [mm]: 18,50
Jämedus 2 [mm]: 18,50
Kõrgus 1 (mm): 54,70
Kõrgus 2 (mm): 54,70
Laius 1 (mm): 146,00
Laius 2 (mm): 146,00 Additional information: "Tootja: SRL
SKODA FABIA COMBI (6
(kvaliteediklass: PJ)"
koos integreeritud kulumi hoiatuskontaktiga
Hoiatuskontakti pikkus (mm): 173,00
WVA-number: WVA 23131
Jämedus 1 [mm]: 18,50
Jämedus 2 [mm]: 18,50
Kõrgus 1 (mm): 54,70
Kõrgus 2 (mm): 54,70
Laius 1 (mm): 146,00
Laius 2 (mm): 146,00

• Fitting Position: Rear Axle
• for brake disc diameter [mm]: 253
• for PR number: 1KD, 1KQ
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 17
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Brake Pad: With bevelled edges
• Test Mark: E9 90R - 01120/457
• Observe technical data:
• Manufacturer: TRW
• Lisainfo: GDB1330
• Additional information: GDB1330

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs