• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with integrated wheel bearing
• Number of Holes: 4
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Rim Hole Number: 5
• Lisainfo: Wheel Hub
• Additional information: Wheel Hub

Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring

• Fitting Position: Front Axle both sides, Front Axle, Rear Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1.87
• Bolt Hole Circle Ø 1 [mm]: 112
• Always compare old and new part (in particular OE No.):
• Name: CE 29SKV438
• Manufacturer: ESEN SKV

• Outer Diameter [mm]: 82
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-AU-006
• Rim Size [inch]: 17.0, 18.0
• Manufacturer: NTY
• Name: NTY KLP-AU-006

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without flange
• Width [mm]: 40.3
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Manufacturer: DENCKERMANN ZAWIESZENIE
• Lisainfo: W413307 DKM
• Additional information: W413307 DKM

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 43
• Width [mm]: 40
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Sealing lip material: NBR (nitrile butadiene rubber)
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.806
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1.76
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV436

• Fitting Position: Front Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1.7
• Number of Holes: 4
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV029

• Fitting Position: Front Axle
• Width [mm]: 40.25
• Inner Diameter [mm]: 43
• Outer Diameter 1 [mm]: 84
• Outer Diameter 2 [mm]: 127
• Number of mounting bores: 4
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle
• Width [mm]: 41
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 95
• Inner Diameter 2 [mm]: 45
• Outer Diameter 2 [mm]: 130
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear
• General Information: wheel hub with bearing; rear
• Manufacturer: VIKA

• Bearing Type: Angular Ball Bearing
• Drawer Guide: Angular Ball Bearing
• Fitting Position: Front Axle both sides
• Width [mm]: 40
• Outer Diameter 1 [mm]: 82
• Outer Diameter 2 [mm]: 85
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 130.8
• Braking/Drive Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 2.53
• Number of Holes: 5
• Bolt Hole Circle Ø 1 [mm]: 112
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV069

• Fitting Position: Front Axle Left, Front Axle Right
• Version: One
• Thread Size: M12X1,5
• Inner Diameter [mm]: 45
• Rim Hole Number: 4
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Supplementary Article/Info 2: with ABS sensor ring
• Outer Diameter [mm]: 130
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-AU-006
• Rim Size [inch]: 17.0, 18.0
• Manufacturer: NTY
• Name: NTY KLT-AU-006

• Suspension: for vehicles with sports suspension
• for PR number: 1BD
• Fitting Position: Rear Axle
• Width [mm]: 69
• Outer Diameter [mm]: 131
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Inner Diameter 1 [mm]: 43
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle
• for PR number: 1BA, 1BE, 1BR, 1BV, 1SA, 1SH
• Flange Diameter [mm]: 130
• Supplementary Article/Info 2: with ABS sensor ring
• Rim Hole Number: 5
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle
• Width [mm]: 41
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 95
• Thread Size: M12x1,5
• Rim Hole Number: 4
• Net weight [kg]: 1.67
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size: M12X1,5
• Inner Diameter [mm]: 45
• Rim Hole Number: 4
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Manufacturer: GSP

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 45
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 130.8
• Rim Hole Number: 5
• Supplementary Article/Info 2: with ABS sensor ring
• Inner Diameter 2 [mm]: 32
• Manufacturer: GSP

• Fitting Position: Rear Axle
• for PR number: 1BD
• Width [mm]: 40.3
• Inner Diameter [mm]: 43
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Rear Axle
• Width [mm]: 69.4
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 131
• Distance of mounting bores [mm]: 112
• Net weight [kg]: 2.45
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Rear Axle
• Width [mm]: 69.4
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 130.9
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 130
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle
• Width [mm]: 69.6
• Number of Teeth, ABS ring: 96
• Inner Diameter [mm]: 32
• Outer Diameter 2 [mm]: 130
• Number of mounting bores: 4
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• for PR number: 1BD
• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: without accessories
• Supplementary Article/Info 2: with integrated wheel bearing
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Height [mm]: 40
• Bearing Type: Ball Bearing
• Alternative Repair Kit: 100 498 0122
• Name: RATTALAAGER
• Manufacturer: MEY
• Lisainfo: 1004070092
• Additional information: 1004070092

• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 43
• Supplementary Article/Info 2: with bolts/screws
• Full Set:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 2
• Fitting Position: Front Axle
• Weight [kg]: 1.57
• Required quantity: 2
• Bearing Type: Angular Ball Bearing
• Inner Diameter [mm]: 45
• Width [mm]: 40
• Outer Diameter 1 [mm]: 82
• Outer Diameter 2 [mm]: 85
• Inner Diameter 1 [mm]: 43
• General Information: wheel bearing; front
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Required quantity: 2
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• for PR number: 1BA, 1BE, 1BR, 1BV, 1SA, 1SH
• Rim Hole Number: 5
• Flange Diameter [mm]: 130
• Supplementary Article/Info 2: with ABS sensor ring
• Quality class: PJ
• Name: Wheel hub

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with integrated wheel bearing
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Width [mm]: 40
• Number of Holes: 4
• Thread Size: M12x1,5x45, M16x1,5x77
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY
• Lisainfo: 1004980122
• Additional information: 1004980122

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Front Axle
• Width [mm]: 40.2
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 85
• Width 1 [mm]: 37
• Supplementary Article/Info 2: without wheel hub
• Inner Diameter 2 [mm]: 45
• Name: Rattalaagrikomplekt
• Manufacturer: OPT

• Fitting Position: Front Axle
• Width [mm]: 40
• Bearing Type: Angular Ball Bearing
• Outer Diameter 1 [mm]: 82
• Outer Diameter 2 [mm]: 85
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Weight [kg]: 1.57
• Supplementary Article/Supplementary Info: with drive shaft bolt
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: with bolts/screws
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 45
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle, Front Axle
• Required quantity: 2
• for PR number: 1BD
• Block Separation:
• Weight [kg]: 1.613
• Packaging length [cm]: 13.7
• Packaging width [cm]: 13.1
• Packaging height [cm]: 7.3
• Supplementary Article/Info 2: without flange
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 43
• Width [mm]: 40.2
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• for PR number: 1BA
• for combined PR number: 1SA+1SH
• Width [mm]: 69.4
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 130.9
• Bolt Hole Circle Ø [mm]: 112
• Number of Holes: 5
• Bearing Type: Angular Ball Bearing
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 2.38
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 32
• Outer Diameter 1 [mm]: 131
• Height 1 [mm]: 69
• Rim Hole Number: 5
• Weight [kg]: 2.54
• Number of Teeth, ABS ring: 45
• Thread Size: M14 x 1.5
• Bolt Hole Circle Ø [mm]: 112
• Manufacturer: A.B.S.

Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter 1 [mm]: 85
• Inner Diameter [mm]: 43
• Inner Diameter 2 [mm]: 45
• Width [mm]: 40.3
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Required quantity: 2
• for PR number: 1BA, 1SH, 1SA, 1BV, 1BR, 1BE
• Rim Hole Number: 5
• Supplementary Article/Info 2: with ABS sensor ring
• Manufacturer: DRIVE

• Vehicle Identification Number (VIN): [3B-3-450 001;], [;4D-1-006 000]
• Number of Holes: 4
• Width 1 [mm]: 40
• Inner Diameter 1 [mm]: 45
• Outer Diameter 1 [mm]: 82
• Tightening Torque [Nm]: 180
• Manufacturer: SNR
• Name: SN R157.26

Fitting Position: Right, Left, Front Axle, Front Axle Right, Front Axle Left

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 40.25
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Supplementary Article/Info 2: without flange
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Width [mm]: 40
• Bearing Type: Angular Ball Bearing
• Outer Diameter 1 [mm]: 82
• Outer Diameter 2 [mm]: 85
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Weight [kg]: 1.19
• Supplementary Article/Info 2: with flange
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: REAR LR+RE
• for OE number: 8E0598611C
• Inner Diameter [mm]: 32
• Width 1 [mm]: 69
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 1
• Name: DA KWD1092
• Manufacturer: DAYCO

• for PR number: 1BA, 1BE, 1BR, 1BV, 1SA, 1SH
• Rim Hole Number: 5
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with screw
• Diameter [mm]: 120
• Weight [kg]: 2.442
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Width [mm]: 69.4
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 131
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 32
• Outer Diameter [mm]: 131
• Bolt Hole Circle Ø [mm]: 112
• Number of Teeth, ABS ring: 45
• Rim Hole Number: 5
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY

Supplementary Article/Info 2: with integrated wheel bearing, with ABS sensor ring General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 130.9
• Inner Diameter [mm]: 32
• Width [mm]: 69.4
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Required quantity: 2
• for PR number: 1BA, 1SH, 1SA, 1BV, 1BR, 1BE
• Flange Diameter [mm]: 130
• Rim Hole Number: 5
• Supplementary Article/Info 2: with ABS sensor ring
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Vehicle Identification Number (VIN): [8E-4-000001;]
• Fitting Position: Right, Left, Rear Axle
• Tightening Torque [Nm]: 200
• Rotation angle [°]: 180
• Number of Holes: 5
• Supplementary Article/Info 2: with rubber mount
• Inner Diameter 1 [mm]: 32
• Outer Diameter 1 [mm]: 130
• Width 1 [mm]: 69
• Manufacturer: SNR
• Name: SN R157.27

• Fitting Position: Front Axle Right, Front Axle Left
• Vehicle Identification Number (VIN) from: 8E-4-000001
• Outer Diameter [mm]: 95
• Required quantity: 1
• Width [mm]: 41
• Supplementary Article/Info 2: with RPM sensor
• Inner Diameter [mm]: 43
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.