Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Length [mm]: 305
-
Manufacturer: JP GROUP A/
S -
Lisainfo: Brake hose,
front -
Additional information: Brake hose,
front
- Fitting Position: Rear Axle
- Length [mm]: 263
-
Manufacturer: JP GROUP A/
S -
Lisainfo: Brake hose,
rear -
Additional information: Brake hose,
rear
-
Fitting Position: Front,
Rear - Material: Metal
-
for OE number: 4D0 611 715B,
171611715, 3D0611715B - Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Front Axle,
Rear Axle - Block Separation:
- Material: Spring Steel
-
for OE number: 4D0 611 715B,
955 355 325 00 -
Name: KINNITUS,
PIDURIVOOLIK - Manufacturer: HAN
- Lisainfo: 108 718 HP
- Additional information: 108 718 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 10
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: at brake caliper,
Rear Axle - Length [mm]: 295
- Internal Thread [mm]: M10x1
- Connector type: Banjo fitting
- Required quantity: 2
- Name: PIDURIVOOLIK
- Manufacturer: MAX
- Construction Year from: 11.2005
- Fitting Position: Front Axle
- Length [mm]: 330
- Internal Thread 1 [mm]: M10x1
- Internal Thread 2 [mm]: M10x1
- Required quantity: 2
- Name: PIDURIVOOLIK
- Manufacturer: MAX
- Fitting Position: Front Axle
- Length [mm]: 330
- Thread Size 1: INN M10x 1.0
- Thread Size 2: INN. M10x1
- Manufacturer: KAMOKA
- Fitting Position: Rear Axle
- Length [mm]: 278
- Thread Size 1: INN M10x 1.0
- Thread Size 2: BANJO 12.3 mm
- Manufacturer: KAMOKA
- Fitting Position: Front Axle
- Length [mm]: 330
- Thread Size 1: INN M10x1.0
- Thread Size 2: INN M10x1.0
- Weight [kg]: 0.09
- Manufacturer: A.B.S.
-
Fitting Position: Front Axle Left,
Front Axle Right -
Internal Thread 1 [mm]: M 10 x 1,
0 -
Internal Thread 2 [mm]: M 10 x 1,
0 - Length [mm]: 308
- Observe system fill quantity:
- Manufacturer: TOPRAN
Material: Rubber with fabric lining, EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity per packing unit: 2
-
Fitting Position: Front Axle,
outer - Internal Thread 1 [mm]: M 10x1
- Internal Thread 2 [mm]: M 10x1
- Length [mm]: 305
- Internal Thread [mm]: M10x1
-
Spanner Size: 15,
5 - Weight [kg]: 0.08
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle Left
- Length [mm]: 310
- Thread Size 1: M10x1
- Thread Size 2: M10x1
- Thread Type: with internal thread
- Manufacturer: QUICK BRAKE
-
Fitting Position: Left,
Right, Front Axle - Length [mm]: 330
- Thread Size 1: F10X1
- Thread Size 2: F10X1
- Manufacturer: BREMBO
- Name: BR T 85 117
-
Length [mm]: 330,
308 - Internal Thread Size: M10 x 1
- External Thread Size: M10 x 1
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.087
- Observe service information:
- Name: PIDURIVOOLIK
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Left, Right - Guarantee: 3 years guarantee
- Weight [kg]: 0.1
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
-
Fitting Position: Rear Axle,
Left, Right - Length [mm]: 280
- Internal Thread [mm]: M10x1
- Guarantee: 3 years guarantee
- Weight [kg]: 0.13
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Quantity per packing unit: 2
-
Fitting Position: Rear Axle,
outer - External Thread [mm]: M 12x1
- Spanner Size: 13
- Length [mm]: 263
- Internal Thread [mm]: M 10x1
- Weight [kg]: 0.087
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
Front Axle Left, Front Axle Right - Thread Size 1: M10x1 Int SF
- Thread Size 2: M10 x 1
- Length [mm]: 307
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE LH6883
- Quality class: PJ
- Fitting Position: Rear Axle
- Length [mm]: 278
- Thread Size 1: INN M10x1.0
- Thread Size 2: BANJO 12.3 mm
- Weight [kg]: 0.12
- Manufacturer: A.B.S.
- Construction Year from: 11.2005
- Fitting Position: Front Axle
- Length [mm]: 330
- Internal Thread 1 [mm]: M10x1
- Internal Thread 2 [mm]: M10x1
- Required quantity: 2
- Name: PIDURIVOOLIK
- Manufacturer: MEY
- Fitting Position: Front Axle
- Overall Length [mm]: 332
- Length 1/Length 2 [mm]: 307
- Thread Size 1: F10x1
- Thread Size 2: F10x1
- Name: PIDURIVOOLIK
- Manufacturer: TRI
-
Lisainfo: AUDI A4 00-
-
Additional information: AUDI A4 00-
- Length [mm]: 265
- Internal Thread Size: M10 x 1
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.11
- Observe service information:
- Name: PIDURIVOOLIK
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Left, Right - Length [mm]: 280
- Thread Size 1: F10X1
- Thread Size 2: 12
- Manufacturer: BREMBO
- Name: BR T 85 116
- Fitting Position: Front Axle
- Length [mm]: 305
- Thread Type: Internal Thread
- Thread Size: M10x1
- Name: PIDURIVOOLIK
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Overall Length [mm]: 295
- Thread Size 1: F10x1
- Thread Size 2: Banjo
- Name: PIDURIVOOLIK
- Manufacturer: TRI
-
Lisainfo: AUDI A04 00-
-
Additional information: AUDI A04 00-
- Fitting Position: Front Axle
- Length [mm]: 305
- Internal Thread 1 [mm]: M10x1
- Internal Thread 2 [mm]: M10x1
- Name: PIDURIVOOLIK
- Manufacturer: BOS
- Required quantity: 2
- Fitting Position: Front Axle
- Length [mm]: 308
- Internal Thread 1 [mm]: M10x1
- Internal Thread 2 [mm]: M10x1
- MAPP code available:
- Spanner Size 1 [mm]: 15.5
- Name: Pidurivoolik
- Manufacturer: ATE
- Fitting Position: Rear Axle Left
- Length [mm]: 265
- Thread Size 1: M10x1
-
Thread Type: with internal thread,
with external thread - Thread Size 2: M12x1
-
Supplementary Article/Info 2: with banjo bolt,
with washers - Manufacturer: QUICK BRAKE
-
Fitting Position: at brake caliper,
Rear Axle - Length [mm]: 295
- Internal Thread [mm]: M10x1
- Connector type: Banjo fitting
- Required quantity: 2
-
Supplementary Article/Supplementary Info: with gasket/
seal - Supplementary Article/Info 2: with banjo bolt
- Name: PIDURIVOOLIK
- Manufacturer: MEY
- Fitting Position: Rear Axle
- Thread Size 1: M10x1 Int SF
- Thread Size 2: Banjo
- Length [mm]: 275
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: Brake hose
- Quality class: PJ
Lisainfo: "Tootja: DELPHI
A4 AVANT (8E5, B6),
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Length [mm]: 263
- Connecting thread: Banjo
- Internal Thread [mm]: M10x1
- Assy./disassy. by qualified personnel required!:
- Name: HE 8AH355460151
- Manufacturer: HELLA PAGID
- Fitting Position: Rear Axle
- Length [mm]: 300
- Name: COB 19032310
- Manufacturer: CORTECO
- Fitting Position: Rear Axle
- Length [mm]: 280
- Thread Size 1: M10x1
- Thread Type: Internal Thread
- Thread Size 2: Banjo
- Name: PIDURIVOOLIK
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Length [mm]: 265
- Diameter 1 [mm]: 12.3
- Thread Size 2: F10 x 1
- Supplementary Article/Info 2: with banjo bolt
- Manufacturer: METZGER
- Fitting Position: Rear Axle
- Length [mm]: 263
- External Thread 2 [mm]: M12x1
- Internal Thread 1 [mm]: M10x1
- Name: PIDURIVOOLIK
- Manufacturer: BOS
- Required quantity: 2
- Fitting Position: Rear Axle
- Length [mm]: 263
- External Thread [mm]: M12x1
- Internal Thread [mm]: M10x1
- MAPP code available:
- Spanner Size 1 [mm]: 13
- Name: Pidurivoolik
- Manufacturer: ATE
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks