• Engine Code: ALZ
• Housing Colour: green
• Corresponds to the original part in colour: black
• Manufacturer: FACET

• Engine Code: ALZ
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: green
• Fitted Diameter [mm]: 20
• Diameter [mm]: 25.5
• for OE number: 059919501A
• Manufacturer: MEAT&DORIA

• for OE number: 06A 905 161 B
• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Number of pins: 4
• Housing Colour: green
• Connector Shape: round
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• for OE number: 06B 905 163 A
• Length [mm]: 51
• Supplementary Article/Info 2: with seal ring
• Fabrication Number: ECP-AU-002
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Colour Coding: green
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA109

• for OE number: 059 919 501 A
• paired article number: at10064
• Width [mm]: 58
• Height [mm]: 25
• Length [mm]: 25
• Weight [g]: 27
• Guarantee: 3 years guarantee
• Number of pins: 4
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Weight [kg]: 0.017, 0.027
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Housing Colour: blue, black
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fabrication Number: ECM-AU-003
• Manufacturer: NTY
• Name: NTY ECM-AU-003

Lisainfo: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5 Additional information: ENG. 1.8T,2.0,24,3.0,4.2 AUDI A4 B6/B7/B8 A6 C5/C6, A8 D2/D3,Q7, VW PASSAT B5

• Guarantee: 3 years guarantee
• Weight [kg]: 0.04
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Voltage [V]: 12
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MAX

• General Information: pressure sensor
• Manufacturer: VIKA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black/blue
• Manufacturer: BREMI

• Height [mm]: 42.3
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Number of mounting bores: 1
• Sensor Type: Hall Sensor
• Fitting Depth [mm]: 42.3
• Quality: OE EQUIVALENT
• for OE number: 0986280429
• Manufacturer: MEAT & DORIA

• Number of pins: 4
• Plug Type: Female
• Number of circuits: 4
• Cable insulation material: Silicone
• Material: CuSn (copper-tin)
• Cable Length [mm]: 250
• Cable cross-section from [mm²]: 0.5
• Cable cross-section to [mm²]: 0.5
• Manufacturer: 3RG

• Voltage [V]: 12
• Corresponds to the original part in colour: black
• Sensor Type: Hall Sensor
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Colour Coding: dark blue
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009121421

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: ALZ
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS10763-12B1

• Number of pins: 3
• Sensor Type: Hall Sensor
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Length [mm]: 50.9
• Outer Diameter [mm]: 12
• Number of connectors: 3
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: D Shape
• Supplementary Article/Info 2: with cable
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: VAL

• Oxygen Sensor: Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Sensor Type: Hall Sensor
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Sensor Type: Piezoelectric Sensor
• Cable Length [mm]: 760
• Number of pins: 2
• Name: CZUJNIK SPALANIA STUKOWEGO AUDI A4 02-
• Manufacturer: MEY

• Fitting Position: Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 770
• Number of pins: 4
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Number of pins: 4
• Pressure from [kPA]: 20
• Pressure to [kPA]: 115
• Manufacturer: FAE

• Engine Code: ALZ
• Pressure from [kPA]: 17
• Pressure to [kPA]: 117
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Manufacturer: FACET

• Cable Length [mm]: 670
• Number of pins: 3
• Name: DETONATSIOONIANDUR
• Manufacturer: DLP

• Engine Code: ALZ
• Pressure from [kPA]: 17
• Pressure to [kPA]: 117
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.226
• Manufacturer: EPS

• Number of pins: 4
• Fabrication Number: EPP-AU-005
• Manufacturer: NTY

• Oxygen Sensor: Regulating Probe, Diagnostic Probe, Oxygen Sensor
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

Fitting Position: before catalytic converter, after catalytic converter

• Number of pins: 3
• Fitting Depth [mm]: 42.4
• Weight [kg]: 0.035
• Manufacturer: ERA

• Oxygen Sensor: Regulating Probe
• Length [mm]: 1,100
• Fabrication Number: ESL-VW-007
• Manufacturer: NTY

• General Information: fuel pressure regulator
• Manufacturer: BORSEHUNG

• Engine Code: ALZ
• Housing Colour: green
• Length [mm]: 800
• Manufacturer: FACET

• Engine Code: ALZ
• Housing Colour: green
• Length [mm]: 800
• Name: EP 1.957.060
• Manufacturer: EPS

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.14
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV904
• Manufacturer: ESEN SKV

• Manufacturer Restriction: VAG
• Number of pins: 3
• Cable Length [mm]: 200
• Socket Width [mm]: 1.5
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Contact surface: Gold-plated
• Cable Cross Section [mm²]: 0.75
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: ENERGY

Fitting Position: before catalytic converter, after catalytic converter

• Number of pins: 4
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 152
• Manufacturer: DENSO
• Name: DN DOX-0119
• Quality class: Q

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT VII SEDAN (GA
(kvaliteediklass: Q)"

• Conductor Number: 4
• Length [mm]: 1,080
• Resistor [Ohm]: 6
• Number of circuits: 4
• Cable Length [mm]: 1,080
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Conductor Number: 4
• Resistor [Ohm]: 3.5
• Length [mm]: 720
• Number of circuits: 4
• Cable Length [mm]: 720
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Number of pins: 4
• Suction pipe connector diameter [mm]: 75
• Quality class: PJ
• Name: Air flow sensor

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 95
• Gross Weight [g]: 139
• Manufacturer: DENSO
• Name: DN DOX-0121
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
MONDEO I SEDAN (GBP)
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Fitting Position: before catalytic converter
• Block Separation:
• Engine Code: ALZ
• Cable Length [mm]: 1,060
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
PASSAT (3B3), 11.00-
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
PASSAT (3B3), 11.00-
(kvaliteediklass: PJ)"

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Transmission Type: Manual Transmission
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• Socket colour: black
• Number of circuits: 4
• Connector Shape: D Shape
• Cable Length [mm]: 625
• Thread Size: M18 x 1,5
• Weight [kg]: 0.154
• for OE number: 021 906 262 C
• Length [mm]: 800
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Version: ZR-PLANAR
• Fitting Position: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Probe
• Construction Year to: 03.2008
• Voltage [V]: 12
• Length [mm]: 1,175
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV038

• Oxygen Sensor: Diagnostic Probe
• Fitting Position: Front
• Length [mm]: 1,020
• Number of connectors: 4
• Manufacturer: VERNET

• Oxygen Sensor: Regulating Probe
• Number of pins: 4
• Connector Shape: D Shape
• Cable Length [mm]: 950
• for OE number: 06B906265B
• Manufacturer: MEAT&DORIA

• Housing Type: with housing
• Number of pins: 4
• Housing material: Plastic
• Connector Shape: D Shape
• Number of mounting bores: 4
• Supplementary Article/Info 2: with integrated grille
• Recommended additional repairs: Air Filter
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 4
• Connector Shape: D Shape
• Housing Type: with housing
• Housing material: Plastic
• Supplementary Article/Info 2: with integrated grille
• for OE number: 06A906461B
• Manufacturer: DELLO AUTOMEGA

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Name: OHUMASSIMOOTJA
• Manufacturer: MAX

• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

Manufacturer: DENCKERMANN ELEKTRONIKA CEWKI CZUJNIKI

• Length [mm]: 800
• Number of circuits: 4
• Resistor [Ohm]: 9
• Conductor Number: 4
• Cable Length [mm]: 800
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Number of pins: 4
• Housing Type: with housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Construction Year to: 03.2008
• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 800
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.15
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV705

• Construction Year to: 03.2008
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 1,060
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.16
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV626
• Manufacturer: ESEN SKV

• Engine Code: ALZ
• Fitting Position: Front
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,000
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.186
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 1
• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Number of pins: 4
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Voltage [V]: 12
• Housing Type: with housing
• Number of pins: 4
• Guarantee: 3 years guarantee
• New Part:
• Used part return not required:
• Weight [kg]: 0.25
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 07SKV147
• Manufacturer: ESEN SKV

• Engine Code: ALZ
• Number of pins: 4
• for OE number: 06A906461B
• Manufacturer: MEAT & DORIA

• Fitting Position: before catalytic converter
• Number of pins: 4
• Cable Length [mm]: 1,100
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Name: VA 368455
• Manufacturer: VALEO

Oxygen Sensor: Regulating Probe, Planar probe, Thread pre-greased, Heated

• for OE number: 06B906265E, 06B906265A
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 775
• Number of pins: 4
• Weight [g]: 119
• Gross Weight [g]: 149
• Manufacturer: DENSO
• Name: DN DOX-1566

Oxygen Sensor: Diagnostic Probe, Heated, Finger probe, Oxygen Sensor

• Exhaust System: for pre-catalytic converter
• for OE number: 06B906265B
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,055
• Number of pins: 4
• Weight [g]: 129
• Gross Weight [g]: 160
• Manufacturer: DENSO
• Name: DN DOX-1589

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor

• Transmission Type: Manual Transmission
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Length [mm]: 950
• Number of circuits: 4
• Manufacturer: VDO

• Required quantity: 1
• Voltage [V]: 12
• Number of pins: 4
• Manufacturer: BREMI

• Housing Type: with housing
• Number of pins: 4
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Oxygen Sensor: Regulating Probe, Heated
• Voltage [V]: 12
• Conductor Number: 4
• Cable Length [mm]: 1,100
• Name: LAMBDA ANDUR
• Manufacturer: PIE

• Operating Mode: Electric
• Manufacturer: MAGNETI MARELLI
• Name: MM AMMQ19663