Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Lambda Sensor: Diagnostic Probe
- Number of circuits: 4
- Overall Length [mm]: 750
-
Manufacturer: JP GROUP A/
S - Lisainfo: Lambda sensor
- Additional information: Lambda sensor
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased -
Fabrication Number: ESL-
SK- 000 - Manufacturer: NTY
-
Name: NTY ESL-
SK- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Number of circuits: 4
- Lambda Sensor: Regulating Probe
- Manufacturer: KAMOKA
- Lambda andur: soojendatud
- Soovituslik vahetusintervall (km): 160 000
- Ühendus/klemm: vajadusel kohandada pistikühendus
- Pistikkontaktide arv: 4
- pikkus üle kõige (mm): 750
- Üldine informatsioon: lambda probe; 4 wire
- Manufacturer: VIKA
-
Lambda Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
-
Cable Length [mm]: 1,
530 - Manufacturer: DELPHI
-
Name: DE ES20166-
12B1 - Quality class: PJ
Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"
- Lambda Sensor: Unheated
- Number of pins: 4
- Cable Length [mm]: 630
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Lambda andur: Diagnoosisond
- Pinge [V]: 12
- Pikkus (mm): 760
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
15 - Takistus [oom]: 9
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 09SKV694
- Manufacturer: ESEN SKV
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Name: BS 0258986615
- Lambda andur: Diagnoosisond
- Pinge [V]: 12
- Pikkus (mm): 800
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 4
-
Kaal (kg): 0,
15 - Takistus [oom]: 6
- Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV705
- Engine Code: ALT
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- for OE number: V99760001
- Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Length [mm]: 350
- Exhaust System: after catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Resistor [Ohm]: 9
- Length [mm]: 721
- Number of circuits: 4
- Conductor Number: 4
- Cable Length [mm]: 721
- Lambda Sensor: Heated
- Name: MM OSM001
- Manufacturer: MAGNETI MARELLI
-
Fitting Position: Front,
after catalytic converter -
Line insulation design: with silicone-
coated woven- fibre insulation - Cable Length [mm]: 720
-
Lambda Sensor: Diagnostic Probe,
Thread pre- greased - Number of circuits: 4
- Weight [kg]: 0.156
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: after catalytic converter
- Cable Length [mm]: 954
-
Lambda Sensor: Planar probe,
Heated - Manufacturer: DELPHI
-
Name: DE ES20169-
12B1
- Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation -
Lambda Sensor: Planar probe,
Heated, Thread pre- greased - Cable Length [mm]: 210
- Number of circuits: 4
- Weight [kg]: 0.09
- Manufacturer: VEMO GERMANY
Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 750
- Number of pins: 4
- Weight [g]: 93
- Gross Weight [g]: 140
- Manufacturer: DENSO
- Name: Lambda sensor
- Quality class: Q
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"
-
Lambda Sensor: Diagnostic Probe,
Planar probe, Heated - Fitting Position: after catalytic converter
-
Cable Length [mm]: 1,
200 - Manufacturer: DELPHI
-
Name: DE ES20338-
12B1 - Quality class: PJ
Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"
- Fitting Position: after catalytic converter
-
Line insulation design: with silicone-
coated woven- fibre insulation - Number of pins: 4
- Socket colour: black
- Connector Shape: D Shape
- Weight [kg]: 0.138
- Length [mm]: 700
- for OE number: 030 906 262 L
-
Thread Size: M18 x 1,
5 - Cable Length [mm]: 700
- Number of circuits: 4
- Exhaust System: before catalytic converter
- Manufacturer: VEMO GERMANY
Lambda Sensor: Diagnostic Probe, Regulating Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Length [mm]: 720
- Technical Information Number: Universal 77015
- Manufacturer: FAE
-
Lambda Sensor: Diagnostic Probe,
Heated -
External Thread Size: M18 x 1,
5 - Spanner Size: 22
- Number of circuits: 4
-
Cable Length [mm]: 1,
760 - Weight [kg]: 0.155
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- for OE number: 06C906265
- Quality: OE
- Manufacturer Restriction: DENSO
- Thread Size: M18x1.5
- Cable Length [mm]: 800
- Number of pins: 4
- Weight [g]: 115
- Gross Weight [g]: 148
- Manufacturer: DENSO
- Name: Lambda sensor
- Quality class: Q
Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor
Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"
Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"
- Lambda Sensor: Regulating Probe
- Fitting Position: before catalytic converter
- Number of pins: 6
-
Length [mm]: 1,
500 - Manufacturer: FAE
-
Lambda Sensor: Diagnostic Probe,
Planar probe - Fitting Position: after catalytic converter
- Cable Length [mm]: 750
- Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PA358066401
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Lambda Sensor: Diagnostic Probe
- Fitting Position: after catalytic converter
- Number of circuits: 4
-
Overall Length [mm]: 1,
760 - Available as universal article as well, see article no.: 0258986615
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Manufacturer: BOSCH
- Name: BS 0258006978
- Lambda Sensor: Heated
-
Recommended change interval [km]: 160,
000 - Connector/Clamp: Connector may need adjustment
- Number of pins: 4
- Overall Length [mm]: 750
- General Information: lambda probe
- Manufacturer: BORSEHUNG
-
Lambda Sensor: Diagnostic Probe,
Regulating Probe - Fitting Position: after catalytic converter
-
Cable Length [mm]: 1,
750 - Number of pins: 4
- Assy./disassy. by qualified personnel required!:
- Manufacturer: HELLA
- Name: HE 6PA358066391
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Number of pins: 4
-
Cable Length [mm]: 1,
800 -
Thread Size: M18x1,
5 - Switch Pressure [bar]: 4
- Connector Shape: oval
- Manufacturer: VALEO
Lambda Sensor: Diagnostic Probe, Planar probe, Thread pre-greased, Heated Fitting Position: before catalytic converter, after catalytic converter
- Fitting Position: before catalytic converter
- Rated Voltage [V]: 12
- Number of pins: 6
- Connector Shape: oval
-
Cable Length [mm]: 1,
510 -
Overall Length [mm]: 1,
538 - Spanner Size: 22
- Thread Size: M 18
- Thread Pitch [mm]: 1.5
- Supplementary Article/Supplementary Info: with cable tie
-
Supplementary Article/Info 2: with plastic socket,
with heat shield pipe - Lubrication: with grease lubrication
- Full Set:
- Manufacturer: TOPRAN
Lambda Sensor: Regulating Probe, Broadband lambda sensor, Heated, Planar probe General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Quantity: 1
- Lambda andur: soojendatud
- Soovituslik vahetusintervall (km): 160 000
- Ühendus/klemm: vajadusel kohandada pistikühendus
- Pistikkontaktide arv: 4
- pikkus üle kõige (mm): 1 760
- Üldine informatsioon: lambda probe; 4 wire
- Manufacturer: VIKA
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Värv: punane
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
15 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV905
-
Lambda Sensor: Regulating Probe,
Lambda Sensor, Heated - Fitting Position: before catalytic converter
- Cable Length [mm]: 950
- Manufacturer: DELPHI
-
Name: DE ES10921-
12B1
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Pikkus (mm): 1 510
- Garantii: 3 aastat garantii
- Ülekandeliinide arv: 5
-
Kaal (kg): 0,
22 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV852
- Lambda andur: soojendatud
- Ühendushulk: 5
- Üldine informatsioon: lambda probe; 5 wire
- Manufacturer: VIKA
- Number of pins: 5
- Connector Shape: D Shape
-
Cable Length [mm]: 1,
360 - Fitting Position: Exhaust Manifold
- Lambda Sensor: Broadband lambda sensor
- for article number: 81519E
- Quality: OE EQUIVALENT
- Manufacturer: MEAT&DORIA
- Lambda andur: Bistabiilne andur
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
16 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: SKV GERMANY
- Name: CE 09SKV911
-
Lambda Sensor: Diagnostic Probe,
Broadband lambda sensor - Fitting Position: after catalytic converter
- Cable Length [mm]: 800
- Number of pins: 6
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6PA009166791
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Lambda andur: Bistabiilne andur
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
15 - Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Tehniline informatsioon: Universal
- Name: CE 09SKV915
- Manufacturer: ESEN SKV
- Fitting Position: before catalytic converter
- Lambda Sensor: Regulating Probe
-
Cable Length [mm]: 1,
500 - Number of pins: 6
- Exhaust System: before catalytic converter
- Assy./disassy. by qualified personnel required!:
-
SVHC: 7439-
92- 1; Lead - Manufacturer: HELLA
- Name: HE 6PA009166821
Brief Information: *** HELLA Electronics OE competence for over 60 years.
- Lambda Sensor: Regulating Probe
- Exhaust System: before catalytic converter
- Lambda andur: Bistabiilne andur
- Pinge [V]: 12
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
16 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Manufacturer: ESEN SKV
- Number of pins: 4
- Connector Shape: D Shape
-
Cable Length [mm]: 1,
360 - Fitting Position: Exhaust Manifold
- Lambda Sensor: Broadband lambda sensor
- for article number: 81519
- Manufacturer: MEAT&DORIA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks