• Inner Diameter [mm]: 57.85
• Lisainfo: Seal, turbo air hose
• Additional information: Seal, turbo air hose

• Braking/Drive Dynamics: for vehicles without ABS
• Model Year from: 2005
• Inner Diameter [mm]: 58.5
• Name: Rongastihend,ohulaadevoolik
• Manufacturer: MAX

• Model Year from: 2005
• Name: Rongastihend,ohulaadevoolik
• Manufacturer: MAX

• Inner Diameter [mm]: 57.85
• Material: FPM (fluoride rubber)
• Manufacturer: ELRING

• Inner Diameter [mm]: 57.85
• Name: DRM 01815
• Manufacturer: DR.MOTOR AUTOMOTIVE

• for PR number: TD0
• Model Year from: 2005
• Weight [kg]: 0.005
• Inner Diameter [mm]: 58
• Packaging length [cm]: 6.9
• Packaging width [cm]: 6.9
• Packaging height [cm]: 0.5
• Manufacturer: FEBEST

• for OE number: 3C0145117F
• Weight [g]: 12
• Name: IM 20282
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 8E0 145 837 G
• Manufacturer: KAMOKA

• Quantity per packing unit: 10
• Diameter [mm]: 56
• Weight [kg]: 0.006
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 4.6
• Width [mm]: 58
• Length [mm]: 65.5
• Manufacturer: AJU

Name: USZCZELKA PRZEWODU CHODNICY POWIETRZA VW GOLF 1,9TDI 97-

• Turbocharger Line: Hot Side, Piping to charge air cooler
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 220
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 54
• Observe broschure:
• Name: Laadimisohu voolik
• Manufacturer: GAT

• Fabrication Number: GPP-VW-132
• Material: Rubber with fabric lining
• Manufacturer: NTY

• for OE number: 3B0 145 838 A
• Material: Rubber with fabric lining
• Connection Diameter (pressure side) [mm]: 57
• Connection Diameter (suction side) [mm]: 63
• Fabrication Number: GPP-VW-018
• Manufacturer: NTY

• Quantity per packing unit: 5
• Shape: O-Ring
• Inner Diameter [mm]: 58
• Thickness [mm]: 4.5
• Material: FPM (fluoride rubber)
• Alternatively:

• Fabrication Number: GPP-AU-010
• Manufacturer: NTY
• Name: NTY GPP-AU-010

• for OE number: 058 145 856 K
• Fitting Position: Charge Air Cooler, Upper
• Length [mm]: 543
• Outer Diameter 1 [mm]: 59
• Outer Diameter 2 [mm]: 62
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: MAX

• for OE number: 03G103493T
• Name: Laadimisohu voolik
• Manufacturer: MD

• Fitting Position: Lower
• Weight [kg]: 0.25
• Weight [g]: 250
• Manufacturer: METALCAUCHO

• Material: Rubber with fabric lining
• Supplementary Article/Info 2: without clamps
• for OE number: 058 145 856 K
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Outlet
• for OE number: 8E0145738H
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Fitting Position: Right, Upper
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• for OE number: 8E0 145738 H
• Fitting Position: Right
• Length [mm]: 439
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 62
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Material: Rubber with fabric lining
• Weight [kg]: 0.28
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 3B0 145838 A
• Fitting Position: Upper
• Length [mm]: 185
• Outer Diameter 1 [mm]: 56
• Outer Diameter 2 [mm]: 64
• Name: Laadimisohu voolik
• Manufacturer: MAX

• for OE number: 8E0145738H
• Weight [g]: 319
• Length [mm]: 296
• Inner Diameter 1 [mm]: 53
• Inner Diameter 2 [mm]: 35
• Name: IM 221942
• Manufacturer: ORIGINAL IMPERIUM

• Turbocharger Line: Cold Side, Piping to engine block
• Hose Length [mm]: 150
• Inner Diameter 1 [mm]: 47
• Inner Diameter 2 [mm]: 50
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Outlet
• Supplementary Article/Info 2: with clamps
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Vehicle Identification Number (VIN) from: 8E-5-400 001
• Fitting Position: Upper, Right, Rear
• Lisainfo: Charger Intake Hose
• Additional information: Charger Intake Hose

• Fitting Position: Charge Air Cooler, Inlet
• for OE number: 8E0145837G
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: SAS

• Fitting Position: Upper, engine sided
• Supplementary Article/Supplementary Info: with gasket/seal, with quick coupling
• Hose Type: Moulded Hose
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Connection Diameter (pressure side) [mm]: 57
• Connection Diameter (suction side) [mm]: 63
• Manufacturer: YSPARTS

• General Information: pressure hose
• Manufacturer: VIKA

• Length [mm]: 439
• for OE number: 8E0 145738 H
• Fitting Position: Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 62
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Fitting Position: Right Front
• Length [mm]: 439
• Colour: black
• Material: PE (Polyethylene)
• Cooling Hose: Turbocharger to piping, Hot Side
• Inner Diameter 1 [mm]: 35
• Inner Diameter 2 [mm]: 35
• Guarantee: 3 years guarantee
• Weight [kg]: 0.36
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV110
• Manufacturer: ESEN SKV

• Weight [g]: 448
• Cooling Hose: Piping to charge air cooler
• Length [mm]: 417
• Inner Diameter 1 [mm]: 55
• Inner Diameter 2 [mm]: 51
• Name: Laadimisohu voolik
• Manufacturer: IMP

• for OE number: 8E0145837G
• Weight [g]: 298
• Length [mm]: 227
• Inner Diameter 1 [mm]: 56
• Inner Diameter 2 [mm]: 54
• Name: IM 221949
• Manufacturer: ORIGINAL IMPERIUM

Manufacturer: FAST

• for OE number: 3B0145838A
• Manufacturer: NRF

• Fitting Position: Left Front
• Cooling Hose: Charge air cooler to piping, Cold Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.44
• Always compare old and new part (in particular OE No.):
• Name: CE 24SKV033
• Manufacturer: ESEN SKV

• Fitting Position: Centre
• Cooling Hose: Piping to charge air cooler, Hot Side
• Guarantee: 3 years guarantee
• Weight [kg]: 0.24
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV117

• for OE number: 3B0145838A
• Name: Laadimisohu voolik
• Manufacturer: MD

• for OE number: 3B0145838A
• Weight [g]: 227
• Plug connector manufacturer: HENN
• Length [mm]: 154
• Inner Diameter 1 [mm]: 52
• Inner Diameter 2 [mm]: 49
• Name: IM 221935
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Outlet
• Manufacturer: FAST

• Weight [kg]: 0.51
• Manufacturer: METALCAUCHO

• General Information: pressure hose
• Manufacturer: VIKA

• for OE number: 3B0 145 838 A
• Material: Rubber with fabric lining
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: TRU

• Length [mm]: 543
• for OE number: 058 145 856 K
• Fitting Position: Charge Air Cooler, Upper
• Outer Diameter 1 [mm]: 59
• Outer Diameter 2 [mm]: 62
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

• Turbocharger Line: Hot Side, Turbocharger to piping
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 410
• Inner Diameter 1 [mm]: 53
• Inner Diameter 2 [mm]: 35
• Observe broschure:
• Manufacturer: GATES

• Turbocharger Line: Cold Side, Charge air cooler to piping
• for OE number: 8E0 145 737 E
• Name: Laadimisohu voolik
• Manufacturer: MAX

• Colour: black
• Inner Diameter 1 [mm]: 53
• Inner Diameter 2 [mm]: 48
• Guarantee: 3 years guarantee
• Turbocharger Line: Charge air cooler to piping, Cold Side
• Weight [kg]: 0.45
• Hose Length [mm]: 380
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Name: CE 43SKV459
• Manufacturer: ESEN SKV

Material: EPDM (ethylene propylene diene Monomer (M-class) rubber)

• Weight [kg]: 0.18
• Weight [g]: 180
• Manufacturer: METALCAUCHO

• Vehicle Identification Number (VIN) from: 8E-5-400 001
• Fitting Position: Upper, engine sided
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Length [mm]: 473
• Fitting Position: Charge Air Cooler, Upper
• Outer Diameter [mm]: 65
• Name: KOMPRESSORIOHUVOOLIK
• Manufacturer: BUG

Manufacturer: YSPARTS

• for OE number: 8E0145745B
• Weight [g]: 560
• Plug connector manufacturer: HENN
• Length [mm]: 428
• Inner Diameter 1 [mm]: 52
• Inner Diameter 2 [mm]: 54
• Name: Laadimisohu voolik
• Manufacturer: IMP

• Turbocharger Line: Cold Side, Piping to engine block
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 150
• Inner Diameter 1 [mm]: 47
• Inner Diameter 2 [mm]: 50
• Observe broschure:
• Manufacturer: GATES

• Thickness [mm]: 5
• Inner Diameter [mm]: 46
• Outer Diameter [mm]: 65
• Guarantee: 3 years guarantee
• Weight [kg]: 0.33
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV509

• General Information: pressure hose
• Manufacturer: VIKA

• Fitting Position: Charge Air Cooler, Outlet
• for OE number: 8E0145737E
• Manufacturer: SASIC

• Fitting Position: Centre
• Colour: black
• Material: PE (Polyethylene)
• Cooling Hose: Charge air cooler to piping, Cold Side
• Inner Diameter 1 [mm]: 52
• Inner Diameter 2 [mm]: 54
• Guarantee: 3 years guarantee
• Weight [kg]: 0.51
• Hose Length [mm]: 455
• Suitable for vehicle type: PC (passenger car)
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 24SKV198

• Inner Diameter 1 [mm]: 52
• Inner Diameter 2 [mm]: 53
• Turbocharger Line: Cold Side
• Supplementary Article/Info 2: with clamps
• Name: Laadimisohu voolik
• Manufacturer: NRF

• Compression ring material: Stainless Steel
• Fitting Position: Upper, Front
• Material: Rubber with fabric lining
• Weight [kg]: 0.498
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 3B0 145 838 A
• Fitting Position: Exhaust Turbocharger, Upper
• Supplementary Article/Supplementary Info: with quick coupling
• Supplementary Article/Info 2: without clamp
• Article number of recommended accessories: 2400580
• Manufacturer: METZGER

• Turbocharger Line: Cold Side, Charge air cooler to piping
• Compression ring material: Stainless Steel
• for OE number: 8E0 145 737 E
• Material: Rubber with fabric lining
• Weight [kg]: 0.52
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Turbocharger Line: Cold Side, Charge air cooler to piping
• Material: PE (Polyethylene)
• Colour: black
• Hose Length [mm]: 455
• Inner Diameter 1 [mm]: 52
• Inner Diameter 2 [mm]: 53.5
• Observe broschure:
• Manufacturer: GATES

• Quantity per packing unit: 100
• Shape: O-Ring
• Inner Diameter [mm]: 58
• Thickness [mm]: 4.5
• Material: FPM (fluoride rubber)