• Weight [kg]: 0.014
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per packing unit: 16
• Fabrication Number: BKS-AU-015
• Manufacturer: NTY
• Name: NTY BKS-AU-015

• Fitting Position: Suction Pipe, both sides
• Supplementary Article/Info 2: with coupling rod, with retaining ring
• Supplementary Article/Supplementary Info: with lever
• Alternative Repair Kit: 119 283
• Standard Set:
• contains more articles than the OE kit (art. no.): 059 198 212
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Suction Pipe, both sides
• Supplementary Article/Info 2: with coupling rod, with retaining ring
• Supplementary Article/Supplementary Info: with lever
• Standard Set:
• Name: Remondikomplekt, imitoru moodul
• Manufacturer: MAX
• Lisainfo: 059198212/MG
• Additional information: 059198212/MG

• Rod/Strut: Coupling Rod
• Supplementary Article/Info 2: with fastening material
• for article number: 54438, 54439
• Number of Parts [parts]: 12
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fabrication Number: BKS-AU-002A
• Manufacturer: NTY
• Name: NTY BKS-AU-002A

• Weight [kg]: 0.04
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 49SKV502

• Weight [kg]: 0.15
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 49SKV500

• Fabrication Number: BKS-AU-001A
• Manufacturer: NTY
• Name: NTY BKS-AU-001A

• Regulator: without control regulator
• Housing material: Polyamid 6.6
• Supplementary Article/Supplementary Info: with lever, with gasket/seal
• Supplementary Article/Info 2: with mounting parts, with bolts/screws
• Fitting Position: Left
• Name: Ohuvotumoodul
• Manufacturer: MAX
• Lisainfo: 059129711CK/MG
• Additional information: 059129711CK/MG

• Weight [kg]: 0.33
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV050

• Weight [kg]: 0.35
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 49SKV501

• Fitting Position: Right
• Regulator: without control regulator
• Housing material: Polyamid 6.6
• Supplementary Article/Supplementary Info: with lever, with gasket/seal
• Supplementary Article/Info 2: with mounting parts, with bolts/screws
• Name: Ohuvotumoodul
• Manufacturer: MAX
• Lisainfo: 059129712BQ/MG
• Additional information: 059129712BQ/MG

• Manufacturer: DR MOTOR
• Name: DRM 0780SL

• Weight [kg]: 0.08
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 49SKV543

• Fitting Position: Left
• Name: Ohuvotumoodul
• Manufacturer: MAX

• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.9
• Manufacturer: SKV GERMANY
• Name: CE 96SKV017
• Additional information: SKV96SKV017
• Lisainfo: SKV96SKV017

• Fitting Position: Left
• Manufacturer: JPN

• Fitting Position: Suction Pipe, both sides
• Supplementary Article/Supplementary Info: with lever, with gaskets/seals
• Number of bolts/screws: 16
• Length 1 [mm]: 237
• Length 2 [mm]: 270
• Alternative Repair Kit: 119 215
• Full Set:
• contains more articles than the OE kit (art. no.): 059 198 212
• Manufacturer: TOPRAN

Supplementary Article/Info 2: with coupling rod, with bolts/screws, with retaining ring General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.9
• Manufacturer: SKV GERMANY
• Name: CE 96SKV018
• Lisainfo: 96SKV018 SKV
• Additional information: 96SKV018 SKV

• Fitting Position: Right
• Used part return not required:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Left
• Used part return not required:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

Manufacturer: JPN

• paired article number: 176463
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Left
• Weight [kg]: 0.674
• Supplementary Article/Supplementary Info: without adjusting element, with gasket/seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.52
• Manufacturer: SKV GERMANY
• Name: CE 96SKV016

• paired article number: 176519
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Right
• Weight [kg]: 0.655
• Supplementary Article/Supplementary Info: without adjusting element, with gasket/seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 059 129 711 CK
• Fitting Position: Left
• Regulator: without control regulator
• Manufacturer: TRUCKTEC

• for OE number: 059 129 712 BQ
• Fitting Position: Right
• Regulator: without control regulator
• Manufacturer: TRUCKTEC

• Fitting Position: Right
• Manufacturer: YSPARTS

• Fitting Position: Right
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with bolts/screws
• for OE number: 059 129 712 BQ
• Width [mm]: 163
• Height [mm]: 109
• Length [mm]: 312
• Weight [kg]: 0.893
• Guarantee: 3 years guarantee
• paired article number: at11337
• Number of mounting points: 8
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Weight [kg]: 0.15
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Name: CE 49SKV523
• Manufacturer: ESEN SKV

Manufacturer: MAGNETI MARELLI

• General Information: intake manifold; without intake manifold actuator
• Manufacturer: VIKA

• General Information: intake manifold; without intake manifold actuator
• Manufacturer: VIKA

• Supplementary Article/Supplementary Info: with gasket/seal, with lever
• Supplementary Article/Info 2: with bolts/screws
• Fabrication Number: BKS-AU-001
• Manufacturer: NTY

• Fitting Position: Left
• paired article number: DRM21806
• Name: Ohuvotumoodul
• Manufacturer: DRM
• Quality class: PJ

• Fitting Position: Right
• paired article number: DRM21805
• Name: Ohuvotumoodul
• Manufacturer: DRM
• Quality class: PJ

• Fitting Position: Left, Right
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Observe service information:
• Always compare old and new part (in particular OE No.):
• Fabrication Number: ENK-VW-007
• Manufacturer: NTY

• Fitting Position: Left
• Regulator: without control regulator
• for OE number: 059129711CK
• Name: Ohuvotumoodul
• Manufacturer: MD

• Fitting Position: Left
• Operating Mode: Electronic
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Weight [kg]: 0.57
• Manufacturer: SKV ESEN

• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with bolts/screws
• Fitting Position: Left
• for OE number: 059 129 711 CK
• Width [mm]: 163
• Height [mm]: 109
• Length [mm]: 312
• Weight [g]: 893
• Guarantee: 3 years guarantee
• Number of mounting points: 8
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: Right
• for OE number: 059129712BQ
• Name: Ohuvotumoodul
• Manufacturer: MD

• Construction Year from: 01.2005
• Operating Mode: Electronic
• New part without deposit:
• Used part return not required:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Operating Mode: Electric
• Number of connectors: 4
• Manufacturer: JPN

• Fitting Position: Suction Pipe, both sides
• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 4
• Connector Shape: D Shape
• Housing material: Aluminium
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Consult accessories list for recommended additional repairs:
• Observe the vehicle manufacturer specifications:
• New Part:
• Used part return not required:
• electrostatic sensitive part:
• Always compare old and new part (in particular OE No.):
• Technical Information: do not touch plug contacts !
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Left
• Regulator: without control regulator
• Supplementary Article/Supplementary Info: with gasket/seal, with lever
• Housing material: Polyamid 6.6
• Fuel Type: Diesel
• Supplementary Article/Info 2: with mounting parts, with bolts/screws
• Material: Plastic
• Weight [kg]: 0.875
• Observe the vehicle manufacturer specifications:
• paired article number: V10-3949
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BKN
• Vehicle Identification Number (VIN) from: 8E-5-400 001
• Fitting Position: Right
• Name: Ohuvotutoru,ohuvarustus
• Manufacturer: PIE

• Fitting Position: Left
• Supplementary Article/Supplementary Info: without gasket/seal
• Regulator: without control regulator
• paired article number: 2100008
• Additionally required articles (article numbers): 2100032
• Manufacturer: METZGER

• Fitting Position: Right
• Regulator: without control regulator
• Material: Plastic
• Observe mounting information:
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: BKN
• Vehicle Identification Number (VIN) from: 8E-5-400 001
• Fitting Position: Left
• Name: Ohuvotutoru,ohuvarustus
• Manufacturer: PIE

• Fitting Position: Left
• Regulator: without control regulator
• Material: Plastic
• Observe mounting information:
• Installation Information: not for aluminum pressure tube
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Operating Mode: Electronic
• Fitting Position: Left, Right
• Always compare old and new part (in particular OE No.):
• Observe mounting information:
• Supplementary Article/Info 2: Control Unit/Software must be trained/updated
• Manufacturer of the recommended special tools: VDO: VAS 6395 A, VDO: VAS 6395 B
• Observe the vehicle manufacturer specifications:
• Additionally required articles (article numbers): 2100007 / 2100008
• Article number of recommended accessories: VW/Audi 059 198 212
• Version: IAM
• Manufacturer: METZGER

• Number of connectors: 4
• Manufacturer: ERA