Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Upper,
Rear, Front Axle Left, Front Axle Right - Control/Trailing Arm Type: for control arm
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
-
Fitting Position: inner,
Front Axle, Lower, Front - Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount -
Lisainfo: AUDI A4 AVANT /
QUATTRO -
Additional information: AUDI A4 AVANT /
QUATTRO
- Quantity per axle: 2
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Lower, Front, inner, both sides - Article number of recommended accessories: 39430 01
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4/ PASSAT 97- - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle Left,
Front Axle Right, inner -
Mounting Type: Rubber-
Metal Mount -
Manufacturer: JP-
GROUP -
Lisainfo: Rubber mount for wishbone,
front, rear -
Additional information: Rubber mount for wishbone,
front, rear
Lisainfo: Rubber mount for wishbone, front
-
Fitting Position: Lower,
Front, Front Axle Left, Front Axle Right -
Material: Rubber/
Metal - Thickness [mm]: 37
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 -
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
Upper -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46
- Width [mm]: 40
- SVHC: No SVHC present!
- Name: Puks
- Manufacturer: FAG
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount -
Fitting Position: Centre,
Lower Front Axle - Axle alignment required after fitting:
- Weight [kg]: 0.065
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Quantity per packing unit: 5
- Control/Trailing Arm Type: Control Arm
- Axle alignment required after fitting:
-
Fitting Position: inner,
Upper, Front Axle -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.118
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Lower Front Axle,
outer -
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front
- for PR number: 1BV
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Mounting Type: Rubber-
Metal Mount -
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper, inner - Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 4
- Outer Diameter [mm]: 46
- Inner Diameter [mm]: 10
- Width [mm]: 26
- Axle alignment required after fitting:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Right,
Left, Front Axle - Required quantity: 4
- Manufacturer: CORTECO
- Name: COC 80004742
- Vehicle Identification Number (VIN) from: 8E1000001
- Vehicle Identification Number (VIN) to: 8E5400000
- Fitting Position: Front Axle
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.07
-
Name: DY 37-
06034- 5 - Manufacturer: DYS
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Outer Diameter [mm]: 50
- Inner Diameter [mm]: 12
- Width [mm]: 31
- Manufacturer: TOPRAN
Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
- Quantity per packing unit: 2
- Diameter [mm]: 46
-
Mounting Type: Rubber-
Metal Mount - Height [mm]: 40
- Axle alignment required after fitting:
-
Fitting Position: both sides,
inner, Upper Front Axle - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.103
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
outer, Lower - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 40
- Thickness 1 [mm]: 37
- Manufacturer: DELPHI
- Name: DE TD475W
- Thickness [mm]: 37
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 -
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.074
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 - Manufacturer: FEB
Fitting Position: Lower, Front Axle Left, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Upper,
Front Axle - Manufacturer: GSP
- Length [mm]: 60
-
Material: Rubber/
Metal - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- Manufacturer: MERTZ
Fitting Position: Front Axle Left, Front Axle Right, Lower, Front, inner
-
Fitting Position: Front Axle,
Lower, both sides, Front, outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 37
- Inner Diameter [mm]: 30
- Height [mm]: 40.4
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 - Manufacturer: MAX
-
Fitting Position: Front Axle,
Rear, Upper - Inner Diameter 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Thickness 1 [mm]: 40
- Manufacturer: DELPHI
- Name: DE TD437W
- Fitting Position: Rear Axle Lower
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter [mm]: 36
- Manufacturer: KAMOKA
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 46,
47 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.09
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 37
- Thickness [mm]: 37
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 40,
24 -
Material: Rubber/
Metal -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.065
- Name: SW 32 60 0003
- Manufacturer: SWAG
Fitting Position: Lower, Front Axle Left, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper - Manufacturer: GSP ZAWIESZENIE
-
Fitting Position: Rear Axle Lower,
inner, Lower - Manufacturer: GSP
-
Material: Rubber/
Metal -
Fitting Position: Rear Axle,
Upper, inner, outer - Thickness [mm]: 46
-
Outer Diameter [mm]: 36,
26 - Inner Diameter [mm]: 12
-
Name: Puks -
Kndmik VW T. A4 00- LE/ PR - Manufacturer: MAX
-
Fitting Position: Front Axle,
Front, Lower - Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 40.5
- for OE number: 8E0407181C
- paired article number: 9001539
- Manufacturer: SASIC
-
Fitting Position: Front Axle both sides,
Upper - Inner Diameter [mm]: 10.2
- Outer Diameter [mm]: 46
- Height [mm]: 40
- Name: ALT 80928AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Front Axle,
Lower, both sides, Front, outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 37
- Inner Diameter [mm]: 30
- Height [mm]: 40.4
- Quantity per axle: 2
- Article number of recommended accessories: 39430 01
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8/ PASSAT 01- DOLNE - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Thickness [mm]: 40
-
Mounting Type: Rubber-
Metal Mount - Outer Diameter 1 [mm]: 46
- Outer Diameter 2 [mm]: 47
- Inner Diameter 1 [mm]: 10
- Manufacturer: BGA
Fitting Position: Front Axle Left, Upper Front Axle, Front Axle Right
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear, inner - Length [mm]: 40
- Inner Diameter [mm]: 10.1
- Outer Diameter [mm]: 46.4
- Quantity per axle: 4
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
-
Vehicle Identification Number (VIN) from: 8E-
1- 000 0 -
Vehicle Identification Number (VIN) to: 8E-
5- 400 0 - Suspension: for vehicles without sports suspension
-
Fitting Position: Front Axle both sides,
Upper, inner -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 46.4
- Inner Diameter [mm]: 10
- Weight [kg]: 0.086
- Length [mm]: 40
- Manufacturer: RTS
- Thickness [mm]: 40
- Inner Diameter [mm]: 10
-
Outer Diameter [mm]: 46,
47 -
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Upper, Front Axle Right -
Mounting Type: Rubber-
Metal Mount - Weight [kg]: 0.09
- Name: SW 32 93 0696
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Fitting Position: Rear Axle
- Axle alignment required after fitting:
- Weight [kg]: 0.109
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Lower,
Front, Front Axle Left, Front Axle Right -
Material: Rubber/
Metal - Length from [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, inner - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front, inner -
Additional information: Rubber mount for wishbone,
front, inner
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear - Control/Trailing Arm Type: for control arm
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Manufacturer: MAX
- Height [mm]: 37
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 40
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 - Manufacturer: MEY
Fitting Position: outer, Front, Lower, Front Axle Left, Front Axle Right
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Weight [kg]: 0.08
- Height 1 [mm]: 26
- Height 2 [mm]: 39.8
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46.4
- Control/Trailing Arm Type: Control Arm
- Weight [g]: 80
- Manufacturer: METALCAUCHO
-
Fitting Position: Rear Axle,
outer - Inner Diameter 1 [mm]: 60
- Outer Diameter 1 [mm]: 12
- Thickness 1 [mm]: 46
- Manufacturer: DELPHI
- Name: DE TD1246W
- Length [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
-
Material: Rubber/
Metal - Weight [kg]: 0.202
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4/ PASSA - Manufacturer: FEB
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Total Length [mm]: 60
- Outer Diameter [mm]: 43.8
- Inner Diameter [mm]: 12.2
- Name: COC 80005087
- Manufacturer: CORTECO
- Required quantity: 2
- Weight [kg]: 0.08
- Inner Diameter [mm]: 10
-
Fitting Position: both sides,
Front, Upper Front Axle, Rear - Outer Diameter [mm]: 46.4
- Manufacturer: TEDGUM
- Height [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 44
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VW T. A4 00- LE/ PR - Manufacturer: MEY
Fitting Position: outer, Rear Axle Right, Front, Rear Axle Left, Lower
-
Mounting Type: Rubber-
Metal Mount -
Fitting Position: Rear Axle Left,
Rear Axle Right, Upper - Control/Trailing Arm Type: for control arm
- Quantity per axle: 4
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle,
Lower -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- Width 1 [mm]: 32
- Width 2 [mm]: 60
- SVHC: No SVHC present!
- Name: LU 829009710
- Manufacturer: FAG
-
Fitting Position: Front Axle,
Front, inner, Right, Left - Outer Diameter [mm]: 50.2
- Inner Diameter [mm]: 12.2
- Weight [kg]: 0.2
- Name: COC 21652815
- Manufacturer: CORTECO
-
Fitting Position: Front Axle,
inner, Lower - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 50
- Thickness 1 [mm]: 60
- Manufacturer: DELPHI
- Name: DE TD440W
- Length [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
-
Material: Rubber/
Metal - Weight [kg]: 0.202
- Observe service information:
- Name: SW 30 60 0031
- Manufacturer: SWAG
Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 12
-
Fitting Position: Lower Front Axle,
both sides, Front - Outer Diameter [mm]: 50.3
- Required quantity: 2
- Weight [kg]: 0.185
- Name: Puks
- Manufacturer: TED
- Construction Year from: 02.2006
-
Fitting Position: Front Axle,
inner, Front, Rear - Axle: 1st front axle
- Weight [kg]: 0.115
- Required quantity: 4
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Manufacturer: MONROE
- Control/Trailing Arm Type: for control arm
-
Fitting Position: Rear Axle,
Upper -
Mounting Type: Rubber-
Metal Mount - Axle alignment required after fitting:
- Weight [kg]: 0.081
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thickness [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 46
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.12
-
Name: Puks -
Kndmik VW T. A4 00- LE/ PR - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 8E-
5- 400 0, 8E- 1- 000 0 -
Vehicle Identification Number (VIN) to: 8E-
5- 400 0 - Suspension: for vehicles with sports suspension
-
Fitting Position: Front Axle both sides,
Upper, inner -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 46.4
- Inner Diameter [mm]: 10
- Length [mm]: 40
- Weight [kg]: 0.088
- Manufacturer: RTS
- Inner Diameter [mm]: 12.5
- Outer Diameter [mm]: 40.2
- Length [mm]: 37
- paired article number: 270702
- Weight [kg]: 0.07
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: in front of axle, Front Axle Left, Front Axle Right, outer, Lower
-
Fitting Position: outer,
Rear Axle both sides, Lower - Required quantity: 2
- Name: SK VKDS431017
- Manufacturer: SKF
-
Fitting Position: Front Axle,
Upper -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 46
- Width [mm]: 40
- SVHC: No SVHC present!
- Manufacturer: FAG
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4 SDN 01-
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle Left,
Front Axle Right, Lower, Rear -
Material: Rubber/
Metal - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65.2
- Manufacturer: MERTZ
- for OE number: 8E0 501 541 J
- Outer Diameter [mm]: 36
- Fitting Position: Rear Axle both sides
- Manufacturer: TRUCKTEC
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
Lower, Front, inner - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 24
- Height [mm]: 60
- Name: ALT 80990AL
- Manufacturer: ALTE AUTOMOTIVE
- Height [mm]: 60
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 50
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Name: Puks -
Kndmik VW P. A4/ PASSA - Manufacturer: MEY
Fitting Position: inner, Front, Lower, Front Axle Left, Front Axle Right General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
- Thickness [mm]: 60
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 46
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.12
- Name: SW 30 93 0687
- Manufacturer: SWAG
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity: 2
- Weight [kg]: 0.202
- Length [mm]: 60
-
Material: Rubber/
Metal - Required quantity: 2
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 50
- General Information: control arm bush
- Manufacturer: VIKA
Fitting Position: Front Axle, inner, Front, Front Axle both sides, Lower
- Thickness [mm]: 46
- Inner Diameter [mm]: 12
-
Outer Diameter [mm]: 36,
26 -
Material: Rubber/
Metal - Weight [kg]: 0.073
-
Name: Puks -
Kndmik VW T. A4 00- LE/ PR - Manufacturer: FEB
Fitting Position: Rear Axle Left, Upper, inner, outer, Rear Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
inner - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 36
- Thickness 1 [mm]: 46
- Manufacturer: DELPHI
- Name: DE TD1301W
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Fitting Position: Front Axle both sides,
Lower, inner, Front - Outer Diameter [mm]: 50.3
- Inner Diameter [mm]: 12.2
- Length [mm]: 60
- Weight [kg]: 0.202
- Manufacturer: RTS
-
Vehicle Identification Number (VIN) from: 8E-
5- 400 001 -
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: Rubber mount for wishbone,
front -
Additional information: Rubber mount for wishbone,
front
-
Fitting Position: Upper,
Rear Axle Right, Rear Axle Left - Height [mm]: 46
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 36
- Supplementary Article/Supplementary Info: without holder
- Required quantity: 2
- replacement in pairs recommended:
-
Name: Puks -
Kndmik VW T. A4 00- LE/ PR - Manufacturer: MEY
- Fitting Position: Rear Axle both sides
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 44
- Height [mm]: 60
- Name: ALT 98282AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: outer,
Lower, Front Axle Left, Front Axle Right - Outer Diameter 1 [mm]: 44
- Inner Diameter 1 [mm]: 12
- Thickness 1 [mm]: 38
- Manufacturer: BGA
-
Fitting Position: Lower,
inner, Front -
Material: Rubber/
Metal - Outer Diameter [mm]: 50
- Manufacturer: KAMOKA
-
Fitting Position: Rear Axle,
Upper, inner, outer - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 36
- Height [mm]: 46
- Name: ALT 88956AL
- Manufacturer: ALTE AUTOMOTIVE
-
Fitting Position: Front Axle,
outer -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Weight [kg]: 0.22
-
Name: DY 37-
06046- 5 - Manufacturer: DYS
-
Fitting Position: Front Axle,
Lower, Front, outer -
Mounting Type: Rubber-
Metal Mount, Pressed - Inner Diameter [mm]: 12.4
- Outer Diameter [mm]: 40.3
- Width 1 [mm]: 37
- Width 2 [mm]: 31
- SVHC: No SVHC present!
- Name: LU 829063910
- Manufacturer: FAG
-
Fitting Position: Lower,
outer, Front, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 331006
- Height [mm]: 40.2
- Inner Diameter [mm]: 12.4
- Outer Diameter [mm]: 40.2
- Name: SK VKDS331006
- Manufacturer: SKF
-
Fitting Position: Front Axle,
inner, Lower, Rear - Inner Diameter 1 [mm]: 12
- Outer Diameter 1 [mm]: 65
- Thickness 1 [mm]: 80
- Name: DE TD1366W
- Manufacturer: DELPHI
-
for combined PR number: 1BA,
1BE, 1BR, 1BV -
Fitting Position: Front,
Rear Axle Lower, outer - Weight [kg]: 0.246
- Packaging length [cm]: 6
- Packaging width [cm]: 5.3
- Packaging height [cm]: 5.3
- Manufacturer: FEBEST
- Fitting Position: Lower
- General Information: bonded rubber bush
- Manufacturer: VIKA
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65.2
- Material: Aluminium
-
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.45
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4 04- - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front,
Rear, Upper Front Axle, outer - Weight [kg]: 0.135
- Packaging length [cm]: 4.6
- Packaging width [cm]: 4.6
- Packaging height [cm]: 4
- Manufacturer: FEBEST
- for PR number: 1BV
-
Fitting Position: Front Axle Right,
Front Axle Left, Upper - Height [mm]: 40
- Inner Diameter [mm]: 10
- Outer Diameter [mm]: 47
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
- Braking/Drive Dynamics: for vehicles with ABS
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 50.4
- Length [mm]: 60
- paired article number: 270327
- Weight [kg]: 0.21
-
Installation Information: Important:
Observe Fitting Instructions - Manufacturer: A.B.S.
Fitting Position: in front of axle, Front Axle Left, Front Axle Right, Lower
-
Fitting Position: Front Axle Right,
Front Axle Left, Centre - Name: COC 49400197
- Manufacturer: CORTECO
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"
-
Fitting Position: Rear Axle,
inner, Left, Right, Upper, outer -
Fabrication Number: ZTT-
CH- 006D - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Front Axle,
Upper, both sides, Front, Rear - Control/Trailing Arm Type: for control arm
- Quantity per axle: 4
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8 LE/ PR PRZEDNIA - Manufacturer: LMI
SVHC: No information available, please contact the manufacturer!
- Control/Trailing Arm Type: for control arm
-
Mounting Type: Rubber-
Metal Mount - Quantity per axle: 2
- Outer Diameter [mm]: 65
- Inner Diameter [mm]: 12
- Axle alignment required after fitting:
- Manufacturer: TOPRAN
Fitting Position: Front Axle Left, Front Axle Right, Lower, Rear, inner General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Lower,
Front, Front Axle both sides, inner - Required quantity: 2
- paired article number: VKDS 331013
- Height [mm]: 60
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 24
- Name: SK VKDS331013
- Manufacturer: SKF
-
Fitting Position: Rear Axle,
both sides, Lower, outer -
Mounting Type: Rubber-
Metal Mount - Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 41.3
- Width [mm]: 45
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: Front Axle,
both sides, Upper - Height [mm]: 40
- Weight [kg]: 0.102
- Required quantity: 4
- Inner Diameter [mm]: 10.1
- Outer Diameter [mm]: 46.3
- Control/Trailing Arm Type: Control Arm
-
Mounting Type: Rubber-
Metal Mount - Packaging length [cm]: 11
- Packaging width [cm]: 6
- Packaging height [cm]: 6
- Manufacturer: MONROE
-
Fitting Position: Front Axle,
Lower, both sides, Rear, inner -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
Name: Puks -
Kndmik AUDI P. A6 04- 11 - Manufacturer: LMI
- Lisainfo: 36761 01 LEM
- Additional information: 36761 01 LEM
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: inner,
Rear, both sides, Front Axle, Lower - Required quantity: 2
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65.1
- Weight [kg]: 0.3
- Manufacturer: TEDGUM_TD
-
for combined PR number: 1BA,
1BE, 1BR, 1BV -
Fitting Position: inner,
Rear Axle Lower, Centre - Weight [kg]: 0.135
- Packaging length [cm]: 4.1
- Packaging width [cm]: 4.1
- Packaging height [cm]: 3.8
- Manufacturer: FEBEST
-
Production date from: 09/
04 -
Fitting Position: Front Axle,
Rear, Lower - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- for OE number: 4F0407183E
- Manufacturer: SASIC
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"
-
for combined PR number: 1BA,
1BE, 1BR, 1BV -
Fitting Position: Rear Axle Upper,
Rear, outer - Weight [kg]: 0.132
- Packaging length [cm]: 4.6
- Packaging width [cm]: 3.7
- Packaging height [cm]: 3.7
- Manufacturer: FEBEST
-
for OE number: 8E0407693AL,
8E0407694AL -
Mounting Type: Rubber-
Metal Mount -
Fitting Position: Front Axle,
Lower, both sides, Rear, inner - Length [mm]: 56
- Overall Length [mm]: 79.3
- Inner Diameter 1 [mm]: 12
- Inner Diameter 2 [mm]: 27
- Outer Diameter [mm]: 63.4
- Manufacturer: TRW
SVHC: No information available, please contact the manufacturer!
- Construction Year from: 02.2006
-
Fitting Position: Front Axle,
Left, Right, outer, Lower - Manufacturer: HUTCHINSON
-
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
-
for OE number: 8E0501529G,
8E0501529K, 4F0501529C - Manufacturer: TRW
Fitting Position: Rear Axle Left, Rear Axle Right, Lower, Rear, outer SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- for OE number: 8K0 407 515
- Weight [g]: 87
- Guarantee: 3 years guarantee
- Length [mm]: 46
- Width [mm]: 90
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
-
for combined PR number: 1BA,
1BE, 1BR, 1BV -
Fitting Position: Rear Axle Lower,
Upper, outer, Centre - Weight [kg]: 0.236
- Packaging length [cm]: 4.5
- Packaging width [cm]: 4.2
- Packaging height [cm]: 4.2
- Manufacturer: FEBEST
-
Vehicle Identification Number (VIN) from: 8E-
5- 400 001 -
Fitting Position: Front Axle Right,
Front Axle Left, Lower, Rear - Height [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Name: Puks -
Kndmik VW P. A4 04- - Manufacturer: MEY
General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.
-
Fitting Position: inner,
Lower Front Axle - Manufacturer: GSP
-
Fitting Position: Front Axle both sides,
Lower, Rear - Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Height [mm]: 80
- Name: ALT 84083AL
- Manufacturer: ALTE AUTOMOTIVE
-
Vehicle Identification Number (VIN) from: 8E-
5- 400 001 -
Fitting Position: Rear,
inner, Lower, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 331022
- Name: SK VKDS331022
- Manufacturer: SKF
-
for combined PR number: D2L,
D60 - Weight [kg]: 0.091
- Quantity: 10
- Packaging length [cm]: 4
- Packaging width [cm]: 4
- Packaging height [cm]: 1.2
- Length [mm]: 40
- Thread Size: M6x1
- Manufacturer: FEBEST
-
Lisainfo: 2398-
002- PCS10 FEBEST -
Additional information: 2398-
002- PCS10 FEBEST
-
Fitting Position: behind the axle,
Rear, Lower Front Axle - Weight [kg]: 0.317
- Inner Diameter [mm]: 65
- Packaging length [cm]: 8
- Packaging width [cm]: 6.5
- Packaging height [cm]: 6.5
- Manufacturer: FEBEST
- Required quantity: 2
-
Fitting Position: Rear,
inner, both sides, Lower Front Axle - Outer Diameter [mm]: 64.9
- Inner Diameter [mm]: 12
- Weight [kg]: 0.56
- Name: TG 00729773
- Manufacturer: TEDGUM
-
Fitting Position: Rear,
Lower, Front Axle Left, Front Axle Right - Thickness [mm]: 80
- Outer Diameter 1 [mm]: 64
- Inner Diameter 1 [mm]: 12
- Manufacturer: BGA
- Construction Year from: 02.2006
- Construction Year to: 06.2008
- Quality: OE Performance
- Fitting Position: Front
- Colour: silver
- Weight [g]: 483
- Manufacturer: GATES
- Fitting Position: mounting
-
Mounting Type: Rubber-
Metal Mount - Name: Control arm bush left=right
- Quality class: PJ
Lisainfo: "Tootja: TEKNOROT
AUDI A4 05-/A6 04-
(kvaliteediklass: PJ)"
Additional information: "Tootja: TEKNOROT
AUDI A4 05-/A6 04-
(kvaliteediklass: PJ)"
-
Fitting Position: Front Axle,
Lower, both sides, Rear, inner -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Outer Diameter [mm]: 63
-
Name: Puks -
Kndmik VW P. A4 04- DOLNY TY L/ P 62, 5MM - Manufacturer: MAX
-
Vehicle Identification Number (VIN) from: 8E-
5- 400 001 -
Fitting Position: Rear,
inner, Lower, Front Axle both sides - Required quantity: 2
- paired article number: VKDS 331014
- Height [mm]: 80
- Inner Diameter [mm]: 12.2
- Outer Diameter [mm]: 64.9
- Manufacturer: SKF ZAWIESZENIE
-
for combined PR number: 1BA,
1BE, 1BR, 1BV -
Fitting Position: Rear Axle Lower,
Rear, inner - Weight [kg]: 0.128
- Packaging length [cm]: 5
- Packaging width [cm]: 3
- Packaging height [cm]: 3
- Manufacturer: FEBEST
-
Additional information: FSTADAB-
002 -
Lisainfo: FSTADAB-
002
- Mounting Type: Hydro Mount
-
Fitting Position: both sides,
Rear, Lower Front Axle - Control/Trailing Arm Type: Control Arm
- Axle alignment required after fitting:
- Weight [kg]: 0.508
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear,
inner, Lower, Front Axle -
Material: Rubber/
Metal - Mounting Type: Hydro Mount
- Weight [g]: 455
- new version:
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Length [mm]: 65
- Overall Length [mm]: 80
- Name: IM 1314
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Front Axle,
Rear, inner, Lower Front Axle - Quantity: 2
- Weight [kg]: 0.486
-
Material: Rubber/
Metal - Thickness [mm]: 80
- Required quantity: 2
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
- General Information: control arm bush
- Manufacturer: VIKA
-
Fitting Position: Front Axle,
Lower -
Mounting Type: Rubber-
Metal Mount - Control/Trailing Arm Type: for control arm
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Width [mm]: 80
- SVHC: No SVHC present!
- Name: Puks
- Manufacturer: FAG
-
for combined PR number: 1BA,
1BE, 1BR, 1BV -
Fitting Position: Rear Axle Lower,
outer, Lower - Weight [kg]: 0.198
- Packaging length [cm]: 4.6
- Packaging width [cm]: 4.6
- Packaging height [cm]: 4
- Manufacturer: FEBEST
- Construction Year from: 02.2006
- Construction Year to: 06.2008
- Quality: OE Performance
- Fitting Position: Front
- Colour: silver
- Weight [g]: 773
- Manufacturer: GATES
-
Fitting Position: Front Axle Right,
Front Axle Left, Lower, Rear - Height [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 65
- Supplementary Article/Supplementary Info: without holder
- reinforced version:
- Required quantity: 2
- Replace in pairs only:
-
Name: Puks -
Kndmik VW P. A4/ A6/ A8/ PASSAT 97- HD - Manufacturer: MEY
General Information: No risk of leakage: MEYLE-HD full-rubber bushing with optimized rubber shape for a significantly longer lifetime.
- new version:
- Thickness [mm]: 80
- Inner Diameter [mm]: 12
- Outer Diameter [mm]: 64
-
Material: Rubber/
Metal -
Fitting Position: Front Axle Left,
Lower, Rear, Front Axle Right - Weight [kg]: 0.486
- for OE number: 4D0 407 183 AC
- Observe service information:
-
Name: Puks -
Kndmik VW P. A4/ PASSA - Manufacturer: FEB
Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for combined PR number: 1BA,
1BE, 1BR, 1BV -
Fitting Position: inner,
Rear Axle Lower, Front - Weight [kg]: 0.387
- Packaging length [cm]: 8
- Packaging width [cm]: 6.5
- Packaging height [cm]: 6.5
- Manufacturer: FEBEST
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks