Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Quantity per packing unit: 10
- Inner Diameter [mm]: 28.5
- Sealing Ring Diameter [mm]: 28.5
- Thickness [mm]: 3.8
-
Shape: O-
Ring - Manufacturer: TOPRAN
Material: EPDM (ethylene propylene diene Monomer (M-class) rubber) General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Material: Plastic,
Aluminium - Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Automatic Transmission
- Core Length [mm]: 677
- Core Width [mm]: 439
- Core Depth [mm]: 32
-
Lisainfo: Radiator,
engine cooling -
Additional information: Radiator,
engine cooling
- Quantity per packing unit: 10
- Thickness [mm]: 3.8
- Outer Diameter [mm]: 28.5
- Material: Rubber
- Weight [kg]: 0.006
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pressure [bar]: 1.5
- Manufacturer: ASHIKA
- Pressure [bar]: 1.5
- Manufacturer: JAPKO
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 26
- Core Length [mm]: 674
- Core Width [mm]: 408
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers
-
Transmission Type: 6-
Speed Manual Transmission - Material: Aluminium
- Core Length [mm]: 677
- Core Width [mm]: 448
- Core Depth [mm]: 32
- Supplementary Article/Info 2: with seal ring
- Radiator type: Brazed cooling fins
- Manufacturer: NRF
- Lisainfo: 675*445*32
- Additional information: 675*445*32
- Core Depth [mm]: 32
- Core Length [mm]: 677
- Core Width [mm]: 435
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
-
Technical Information: quick connection inlet/
outlet - Name: Radiator
- Quality class: PJ
Lisainfo: A6 04-11 (kvaliteediklass PJ) Additional information: A6 04-11 (kvaliteediklass PJ)
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 677
- Core Width [mm]: 439
- Inlet Ø [mm]: 38
- Outlet Ø [mm]: 38
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without cap,
without expansion tank -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: AUDI A 6 /
S 6 (C6) (04- ) 2.4 i V6 -
Additional information: AUDI A 6 /
S 6 (C6) (04- ) 2.4 i V6
Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box
- Transmission Type: Manual Transmission
-
Vehicle Equipment: for vehicles with/
without air conditioning - Core Length [mm]: 680
- Core Width [mm]: 445
- Core Depth [mm]: 32
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Packaging length [cm]: 119
- Packaging width [cm]: 65.5
- Packaging height [cm]: 18
- Weight [kg]: 5.15
-
Transmission Type: 6-
Speed Automatic Transmission - Material: Aluminium
-
Heating/Cooling: for vehicles with combined radiator/
oil cooler - Core Length [mm]: 675
- Core Width [mm]: 445
- Core Depth [mm]: 32
- Radiator type: Brazed cooling fins
- Manufacturer: NRF
- Lisainfo: 675*445*32
- Additional information: 675*445*32
- Radiator type: Brazed cooling fins
- Core Depth [mm]: 0
- Core Length [mm]: 0
- Core Width [mm]: 0
- General Information: radiator; lead welding
- Manufacturer: VIKA
- Core Depth [mm]: 31
- Core Length [mm]: 675
- Core Width [mm]: 445
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
-
Technical Information: quick connection inlet/
outlet - Name: Radiator
- Quality class: PJ
Lisainfo: A6 04-11 (kvaliteediklass PJ) Additional information: A6 04-11 (kvaliteediklass PJ)
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Automatic Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 678
- Core Width [mm]: 438
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
- Supplementary Article/Info 2: without expansion tank
- Supplementary Article/Supplementary Info: with oil cooler
- Water Tank Material (radiator): Plastic
Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers
- Radiator type: Brazed cooling fins
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Core Depth [mm]: 32
- Core Length [mm]: 677
- Core Width [mm]: 439
- Manufacturer: KAMOKA
- Core Length [mm]: 675
- Core Width [mm]: 445
- Core Depth [mm]: 32
- Inlet Ø [mm]: 38.5
- Outlet Ø [mm]: 38.5
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Packaging length [cm]: 84
- Packaging width [cm]: 52
- Packaging height [cm]: 18
- Weight [kg]: 4.542
- Manufacturer: AKSDASIS
- Vehicle Equipment: for vehicles with air conditioning
- Transmission Type: Automatic Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 677
- Core Width [mm]: 439
- Inlet Ø [mm]: 38.4
- Outlet Ø [mm]: 38.4
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without cap,
without expansion tank -
Supplementary Article/Supplementary Info: with oil cooler,
with gaskets/ seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: AUDI A 6 /
S 6 (C6) (04- ) 2.4 i V6 -
Additional information: AUDI A 6 /
S 6 (C6) (04- ) 2.4 i V6
Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box
-
Weight [g]: 4,
170 - Core Length [mm]: 675
- Core Width [mm]: 461
- Core Depth [mm]: 34
-
Gross Weight [g]: 5,
850 -
Manufacturer: DENSO-
TERMIKA
- Radiator type: Brazed cooling fins
- Core Depth [mm]: 0
- Core Length [mm]: 0
- Core Width [mm]: 0
- General Information: radiator; lead welding
- Manufacturer: VIKA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks