• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Quantity per packing unit: 25
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Material: Steel
• Shape: C Shape
• Lisainfo: 591.840 ELR
• Additional information: 591.840 ELR

• Vehicle Identification Number (VIN) to: 4F-7-047 000
• Length [mm]: 22
• External Thread [mm]: M14 x 1,5
• Material: Steel
• Bolt Head-/Nut Design: Male Hex
• Lisainfo: PAKENDIS 10 tk, kuvatakse 1tk hind
• Additional information: PAKENDIS 10 tk, kuvatakse 1tk hind

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Quantity per packing unit: 25
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Material: Copper
• Shape: C Shape
• DIN/ISO: 7603
• Alternative Repair Kit: 017.736, 036.400, 505.550, 505.540
• Manufacturer: ELRING
• Lisainfo: 813.036 ELR
• Additional information: 813.036 ELR

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Quantity per packing unit: 25
• Thickness [mm]: 2
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 21
• Weight [kg]: 0.001
• Fitting Position: Oil Sump
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 4F-7-047001
• Material: Copper
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 21
• Thickness [mm]: 2
• Shape: C Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Thread Size: M14x1,5
• Length [mm]: 17
• Additionally required articles (article numbers): 259.150.100
• Spanner Size: 19 mm
• Manufacturer: FA1 FISCHER

• Quantity per packing unit: 6
• Kaal (kg): 0,04
• Keermemõõt: M14x150
• Kruvide-/Mutrite teostus: koos alusseibiga
• Manufacturer: METALCAUCHO

• Vehicle Identification Number (VIN) to: 4F-7-047000
• Quantity per packing unit: 10
• Bolt/Nut Version: Prevent-loss disc
• Thread Size: M 14
• Thread Length [mm]: 22
• Thread Pitch [mm]: 1.5
• Overall Length [mm]: 30
• Material: Steel
• Surface: Zink-nickel coated
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 19
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 4F-7-047 000
• Quantity per packing unit: 20
• Pikkus (mm): 22
• Keermemõõt: M14 x 1,5
• Võtmekaugus: 19
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Thread Size: M14x1,5
• Length [mm]: 17
• Spanner Size: 19 mm
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FISCHER

• Vehicle Identification Number (VIN) to: 4F-7-047 000
• Thread Size: M14x1,5
• Length [mm]: 22
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FA1

• Vehicle Identification Number (VIN) to: 4F-7-047 000
• Pikkus (mm): 22
• Keermemõõt: M14 x 1,50
• Manufacturer: 3RG

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Thread Size: M14x1,5
• Length [mm]: 12
• Bolt Head-/Nut Design: Hexagon Socket
• Additionally required articles (article numbers): 100.058.100
• Manufacturer: FA1 FISCHER

• for OE number: N 908 132 02
• Thread Size: M14 x 1,5
• Manufacturer: TRUCKTEC

• Vehicle Identification Number (VIN) to: ******4F*7*047000
• Length [mm]: 29.5
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 17.5
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 22
• Weight [kg]: 0.04
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: ******4F*7*047000
• Length [mm]: 29.5
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 17.5
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Material: Steel
• Surface: Zinc-coated
• Screw length below head [mm]: 22
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 2
• Inner Diameter [mm]: 14.4
• Outer Diameter [mm]: 19.8
• DIN/ISO: 7603
• Material: Steel
• Weight [kg]: 0.005
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 4F-7-047 000
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Vehicle Identification Number (VIN) to: 4F-7-047 000
• Keermemõõt: M14x1,5x22
• Võtmekaugus: 19 mm
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Vehicle Identification Number (VIN) from: ******4F*7*047001
• Length [mm]: 15
• Outer Diameter [mm]: 19
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 10
• Spanner Size: 6
• Bolt Head-/Nut Design: Hexagon Socket
• Material: Steel
• Screw length below head [mm]: 12
• Weight [kg]: 0.018
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 4F-7-047001
• Quantity per packing unit: 10
• Thread Size: M 14
• Thread Pitch [mm]: 1.5
• Thread Length [mm]: 12
• Overall Length [mm]: 16
• Material: Steel
• Strength class: 8.8
• Bolt/Nut Version: Flat Head
• Bolt Head-/Nut Design: Hexagon Socket
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Thread Size: M14x1,5x12
• Bolt Head-/Nut Design: Hexagon Socket
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ELRING

• Vehicle Identification Number (VIN) to: 4F-7-047 000
• Materjal: Metall
• Keermemõõt: M14x1,5
• Pikkus (mm): 30
• Kruvipikkus kruvipea all [mm]: 22
• Kruvipea-/Mutriprofiil: Väliskuuskant
• Võtmekaugus: 19
• Materjal tihend: Metall
• alternatiivne remondikomplekt: 8030062
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Thread Size: M14x1,5
• Length [mm]: 12
• Bolt Head-/Nut Design: Hexagon Socket
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FA1 FISCHER
• Name: FI 257807

• Vehicle Identification Number (VIN) to: 4F-7-047 000
• Thread Size: M14x1,5x22
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 19 mm
• Alternative Repair Kit: 505.540
• Supplementary Article/Info 2: with seal ring
• Manufacturer: ELRING

• Vehicle Identification Number (VIN) from: ******4F*7*047001
• Length [mm]: 15
• Outer Diameter [mm]: 19
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 10
• Spanner Size: 6
• Bolt Head-/Nut Design: Hexagon Socket
• Material: Steel
• Screw length below head [mm]: 12
• Weight [kg]: 0.015
• Supplementary Article/Info 2: without seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Thread Size: M14x1,5x12
• Bolt Head-/Nut Design: Hexagon Socket
• Alternative Repair Kit: 982.340
• Supplementary Article/Info 2: without seal ring
• Manufacturer: ELRING

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Keermemõõt: M14x1,5x12
• Kruvipea-/Mutriprofiil: sisekuuskant
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: DR.MOTOR AUTOMOTIVE

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Thread Size: M14x1,5x16
• Bolt Head-/Nut Design: Male Hex
• Spanner Size: 19 mm
• Alternative Repair Kit: 878.070
• Supplementary Article/Info 2: without seal ring
• Manufacturer: ELRING

• Vehicle Identification Number (VIN) from: ******4F*7*047001
• Length [mm]: 15
• Outer Diameter [mm]: 19
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 10
• Spanner Size: 6
• Bolt Head-/Nut Design: Hexagon Socket
• Material: Steel
• Screw length below head [mm]: 12
• Supplementary Article/Info 2: without seal ring
• Name: SW 30 93 8788
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Length [mm]: 15
• Thread Size: M 14 x 1,50 x 12
• Spanner Size: 6
• Packing Type: Blister Pack
• Name: COU 220150S
• Manufacturer: CORTECO

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Materjal: Metall
• Keermemõõt: M14x1,5
• Pikkus (mm): 15
• Kruvipikkus kruvipea all [mm]: 12
• Kruvipea-/Mutriprofiil: sisekuuskant
• Võtmekaugus: 6
• Materjal tihend: Alumiinium
• Siseläbimõõt [mm]: 14
• Välisläbimõõt [mm]: 20
• Jämedus/Tugevus (mm): 2
• Konteineri tüüp: Kott
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) from: ******4F*7*047001
• Quantity per packing unit: 25
• Length [mm]: 15.3
• Outer Diameter [mm]: 19
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 9
• Quality/ Grade: 4.8
• Spanner Size: T45
• Bolt Head-/Nut Design: Female Torx
• Material: Steel
• Surface: Zink-nickel coated
• Screw length below head [mm]: 12
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN
• Additional information: FE103349
• Lisainfo: FE103349

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: ******4F*7*047001
• Length [mm]: 15.3
• Outer Diameter [mm]: 19
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 9
• Quality/ Grade: 4.8
• Spanner Size: T45
• Bolt Head-/Nut Design: Female Torx
• Material: Steel
• Surface: Zink-nickel coated
• Screw length below head [mm]: 12
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN
• Additional information: FE103344
• Lisainfo: FE103344

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 4F-7-047 000
• Length [mm]: 29.5
• Thread Size: M 14 x 1,50 x 22
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Packing Type: Blister Pack
• Name: COU 220125S
• Manufacturer: CORTECO

• Vehicle Identification Number (VIN) from: ******4F*7*047001
• Length [mm]: 15.3
• Outer Diameter [mm]: 19
• External Thread Size: M14 x 1,5
• Thread Length [mm]: 9
• Quality/ Grade: 4.8
• Spanner Size: T45
• Bolt Head-/Nut Design: Female Torx
• Material: Steel
• Surface: Zink-nickel coated
• Screw length below head [mm]: 12
• Weight [kg]: 0.022
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 10 3344
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) to: 4F-7-047 000
• Quantity per packing unit: 5
• External Thread [mm]: M14 x 1,5
• Required quantity: 1
• Bolt Head-/Nut Design: Hexagon Socket
• Thread Pitch [mm]: 1.5
• for OE number: N 016 027 6
• Fitting Position: engine sided
• Thread Size: M14 x 1,5
• Bolt/Nut Version: Flat Head
• Material: Steel
• Thread Length [mm]: 12
• Supplementary Article/Info 2: with seal ring
• Weight [kg]: 0.018
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Quantity per packing unit: 10
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Shape: C Shape
• Material: Copper
• Alternatively:
• Manufacturer: FA1

• Vehicle Identification Number (VIN) to: 4F-7-047 000
• Quantity per packing unit: 20
• External Thread [mm]: M14 x 1,5
• Supplementary Article/Info 2: with seal ring
• Length [mm]: 29.5
• Thread Size: M14 x 1,5
• Spanner Size: 19
• Bolt Head-/Nut Design: Male Hex
• Surface: Zink-nickel coated
• Bolt/Nut Version: Prevent-loss disc
• Thread Length [mm]: 22
• Required quantity: 1
• Material: Steel
• Thread Pitch [mm]: 1.5
• for OE number: N 908 132 02
• Fitting Position: engine sided
• Weight [kg]: 0.064
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Weight [kg]: 0.034
• Thread Size: M22x1,5
• Packaging length [cm]: 2.7
• Packaging width [cm]: 2.7
• Packaging height [cm]: 1.8
• Manufacturer: FEBEST

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Quantity per packing unit: 100
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Shape: C Shape
• Material: Copper
• Manufacturer: FISCHER

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Quantity per packing unit: 100
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Shape: C Shape
• Material: Steel

• Vehicle Identification Number (VIN) from: 4F-7-047 001
• Quantity per packing unit: 10
• Inner Diameter [mm]: 14
• Outer Diameter [mm]: 20
• Thickness [mm]: 2
• Shape: C Shape
• Alternatively:
• Material: Steel