Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Rear Axle
- Length [mm]: 403
- Thread Size: M10x1
- Supplementary Article/Supplementary Info: with banjo fitting
-
Lisainfo: Brake hose,
rear -
Additional information: Brake hose,
rear
- Fitting Position: Rear Axle
- Length [mm]: 403
- Thread Size: M10x1
-
Manufacturer: JP GROUP A/
S -
Lisainfo: Brake hose,
rear -
Additional information: Brake hose,
rear
- Fitting Position: Front Axle
- Length [mm]: 515
- Thread Size: M10x1
- Manufacturer: JP GROUP
-
Lisainfo: Brake hose,
front -
Additional information: Brake hose,
front
-
Fitting Position: Front,
Rear - Manufacturer: JP GROUP
-
Lisainfo: PAKENDIS 10 tk,
kuvatakse 1tk hind -
Additional information: PAKENDIS 10 tk,
kuvatakse 1tk hind
-
Fitting Position: Rear,
Front - Weight [kg]: 0.009
-
Name: KINNITUS,
PIDURIVOOLIK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear,
Front - Quantity per packing unit: 25
- Weight [kg]: 0.015
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Length [mm]: 427
- Internal Thread [mm]: M10x1
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Left,
Right, Rear Axle - Thread Size 1: F10x1
- Thread Size 2: F10x1
- Length [mm]: 430
- Name: Pidurivoolik
- Manufacturer: MAX
- Fitting Position: Rear Axle
- Length [mm]: 425
- Thread Type: with internal thread
- Thread Size 1: M10x1
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Rear Axle
- Length [mm]: 425
- Thread Size 1: INN M10x 1.0
- Thread Size 2: INN. M10x1
- Manufacturer: KAMOKA
-
Fitting Position: Front Axle,
Left, Right - Guarantee: 3 years guarantee
- Weight [kg]: 0.14
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Fitting Position: Front Axle
- Length [mm]: 542
- Thread Size 1: INN M10x 1.0
- Thread Size 2: INN. M10x1
- Manufacturer: KAMOKA
- Fitting Position: Rear Axle
- Thread Size 1: M10x1 Int SF
- Thread Size 2: M10x1 Int SF
- Length [mm]: 420
- Manufacturer: DELPHI HYDRAULIKA HAMULCOWA SPRZEGLOWA
- Quality class: PJ
- Name: Brake hose
- Length [mm]: 427
- Internal Thread Size: M10 x 1
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Weight [kg]: 0.12
- Observe service information:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Rear Axle,
Left, Right - Length [mm]: 426
- Thread Size 1: F10X1
- Thread Size 2: F10X1
- Manufacturer: BREMBO
- Name: BR T 85 130
- Fitting Position: Rear Axle
- Overall Length [mm]: 430
- Thread Size 1: F10x1
- Thread Size 2: F10x1
- Name: PIDURIVOOLIK
- Manufacturer: TRI
- Lisainfo: VAG
- Additional information: VAG
- Fitting Position: Rear Axle
- Length [mm]: 430
- External Thread 1 [mm]: M10x1
- External Thread 2 [mm]: M10x1
- Required quantity: 2
- Name: Pidurivoolik
- Manufacturer: MAX
- Fitting Position: Front Axle
- Length [mm]: 545
- Net weight [kg]: 0.11
- Name: PIDURIVOOLIK
- Manufacturer: NK
- Fitting Position: Rear Axle
- Length [mm]: 425
- Thread Size 1: INN M10x1.0
- Thread Size 2: INN M10x1.0
- Weight [kg]: 0.12
- Manufacturer: A.B.S.
-
for PR number: 1LF,
1LW - Block Separation:
- Length [mm]: 545
- Internal Thread Size: M10 x 1
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.13
- Observe service information:
- Name: PIDURIVOOLIK
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Length [mm]: 542
- Thread Size 1: INN M10x1.0
- Thread Size 2: INN M10x1.0
- Weight [kg]: 0.12
- Manufacturer: A.B.S.
- Fitting Position: Front Axle
- Quantity per packing unit: 2
-
Spanner Size: 15/
15 - Internal Thread 2 [mm]: M 10x1
- Length [mm]: 515
- Internal Thread 1 [mm]: M 10x1
- Weight [kg]: 0.126
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Length [mm]: 430
- External Thread 1 [mm]: M10x1
- External Thread 2 [mm]: M10x1
- Required quantity: 2
- Name: PIDURIVOOLIK
- Manufacturer: MEY
-
Fitting Position: Left,
Right, Front Axle -
for PR number: 1LF,
1LW - Length [mm]: 542
- Thread Size 1: F10X1
- Thread Size 2: F10X1
- Manufacturer: BREMBO
- Name: BR T 85 129
- Fitting Position: Front Axle
- Overall Length [mm]: 540
- Thread Size 1: F10x1
- Thread Size 2: F10x1
- Name: PIDURIVOOLIK
- Manufacturer: TRI
-
Lisainfo: AUDI Q7 /
VW TOUAREG -
Additional information: AUDI Q7 /
VW TOUAREG
- Fitting Position: Front Axle Left
- Length [mm]: 525
- Thread Size 1: M10x1
- Thread Size 2: M10x1
- Thread Type: with internal thread
- Manufacturer: QUICK BRAKE
- for PR number: 1LF
- Fitting Position: Front Axle
- Length [mm]: 515
- Internal Thread 1 [mm]: M10x1
- Internal Thread 2 [mm]: M10x1
- Required quantity: 2
- Name: PIDURIVOOLIK
- Manufacturer: MEY
- Construction Year to: 09.2011
- Fitting Position: Front Axle
- Length [mm]: 537
- Name: COB 19034269
- Manufacturer: CORTECO
-
Fitting Position: Rear Axle,
Left, Right - Length [mm]: 445
- Thread Size 1: F10X1
- Thread Size 2: 10
- Name: BR T 85 132
- Manufacturer: BREMBO
- Fitting Position: Rear Axle
- Length [mm]: 400
- Internal Thread 1 [mm]: M10x1
- Internal Thread 2 [mm]: M10x1
- Manufacturer: BOSCH
-
Fitting Position: Rear Axle,
Left, Right - Construction Year to: 09.2011
- Thread Size 1: M10x1
- Thread Size 2: M10x1
- Length [mm]: 425
- Thread Type: Internal Thread
- Manufacturer: TRW
- Quality class: Q
- Name: Brake hose
SVHC: No information available, please contact the manufacturer!
-
Fitting Position: Front Axle,
Left, Right - Construction Year to: 09.2011
- Length [mm]: 542
- Thread Size 1: M10x1
- Thread Size 2: M10x1
- Thread Type: Internal Thread
- Manufacturer: TRW
- Quality class: Q
- Name: Brake hose
SVHC: No information available, please contact the manufacturer!
- Required quantity: 2
- Fitting Position: Rear Axle
- Length [mm]: 425
- Internal Thread 1 [mm]: M10x1
- Internal Thread 2 [mm]: M10x1
- MAPP code available:
- Manufacturer: ATE
- Required quantity: 2
- Fitting Position: Front Axle
- Length [mm]: 515
- Internal Thread 1 [mm]: M10x1
- Internal Thread 2 [mm]: M10x1
- MAPP code available:
- Spanner Size 1 [mm]: 15
- Name: Pidurivoolik
- Manufacturer: ATE
- Fitting Position: Front Axle
- Length [mm]: 520
- Internal Thread 1 [mm]: M10x1
- Internal Thread 2 [mm]: M10x1
- Manufacturer: BOSCH
- Fitting Position: Rear Axle Left
- Length [mm]: 404
- Thread Size 1: M10x1
- Thread Size 2: M10x1
- Thread Type: with internal thread
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks