• Supplementary Article/Info 2: with a plug
• Number of wires (repair kit, cable set): 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Weight [kg]: 0.01
• Guarantee: 3 years guarantee
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV902

• Supplementary Article/Info 2: with a plug
• Number of pins: 3
• Number of wires (repair kit, cable set): 3
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front, Rear
• Fabrication Number: EZC-VW-304
• Manufacturer: NTY
• Name: NTY EZC-VW-304

• Fitting Position: Front
• Colour: black
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 02.2008
• Fitting Position: both sides, Rear, Front, inner, outer
• Fabrication Number: EPDC-AU-007
• Manufacturer: NTY
• Name: NTY EPDC-AU-007

• Fitting Position: Front, Rear
• Fabrication Number: EPDC-FR-013
• Number of pins: 3
• Manufacturer: NTY

• Construction Year to: 01.2008
• Fitting Position: Front
• Sensor Type: Ultrasonic Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front, inner
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front, inner
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Manufacturer: YSPARTS

• Construction Year to: 02.2008
• Fitting Position: Front, Rear
• Voltage [V]: 12
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Number of pins: 3
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 28SKV011

• for OE number: 4H0 919 275 A
• Fitting Position: Rear, Front
• Name: SENSOR, PARKIMISABI
• Manufacturer: MAX

• Fitting Position: Left, Right, inner, outer, Front, Rear
• Construction Year to: 01.2008
• Voltage [V]: 12
• Sensor Type: Ultrasonic Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 28SKV012
• Manufacturer: ESEN SKV

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Number of connectors: 3
• Lisainfo: Sensor, park assist sensor
• Additional information: Sensor, park assist sensor

• Sensor Type: Ultrasonic Sensor
• Fitting Position: Rear
• Colour: black
• Shape: angled
• Chemical Properties: Paintable
• Manufacturer: FAST

• Fitting Position: Rear
• Manufacturer: FAST

• Quantity: 4
• Fitting Position: Rear Axle
• General Information: ultrasound sensor; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• General Information: ultrasound sensor; rear
• Manufacturer: VIKA

• Fitting Position: Front
• Manufacturer Restriction: VAG
• Cable Length [mm]: 200
• Number of pins: 6
• Socket Width [mm]: 1.6
• Cable Cross Section [mm²]: 0.75
• Supplementary Article/Info 2: with plug
• Supplementary Article/Supplementary Info: with gaskets/seals
• Cable insulation material: Silicone
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Plug housing design: Plug housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Fitting Position: Rear
• Colour: black
• Shape: angled
• Sensor Type: Ultrasonic Sensor
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Chemical Properties: Paintable
• Connector Shape: oval
• Housing Colour: black
• Manufacturer: ERA

• Fitting Position: both sides
• Sensor Type: Ultrasonic Sensor
• for OE number: 66 20 9 139 867
• Chemical Properties: Paintable
• Length [mm]: 75
• Guarantee: 3 years guarantee
• Number of pins: 3
• Voltage [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: both sides
• Sensor Type: Ultrasonic Sensor
• for OE number: 1S0 919 275 D
• Chemical Properties: Paintable
• Length [mm]: 75
• Guarantee: 3 years guarantee
• Number of pins: 3
• Voltage [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: both sides
• Sensor Type: Ultrasonic Sensor
• for OE number: 3C0 919 275 P
• Chemical Properties: Paintable
• Length [mm]: 75
• Guarantee: 3 years guarantee
• Number of pins: 3
• Voltage [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• for OE number: 3C0 919 275 S
• Fitting Position: Rear, Front
• Name: SENSOR, PARKIMISABI
• Manufacturer: TRU

• for OE number: 4H0 919 275 A
• Fitting Position: Rear, Front
• Name: SENSOR, PARKIMISABI
• Manufacturer: TRU

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Surface: primed
• Number of pins: 3
• Shape: straight
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front
• General Information: Parking distance sensor; front; primed
• Manufacturer: BORSEHUNG

• Fitting Position: both sides
• Sensor Type: Ultrasonic Sensor
• for OE number: 1S0 919 275
• Chemical Properties: Paintable
• Length [mm]: 75
• Guarantee: 3 years guarantee
• Number of pins: 3
• Connector Shape: oval
• Voltage [V]: 12
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: Front, inner
• Sensor Type: Ultrasonic Sensor
• Colour: black
• Diameter [mm]: 15.5
• Number of pins: 3
• Connector Shape: oval
• for OE number: 1S0919275D
• Manufacturer: MEAT & DORIA

• Fitting Position: Rear
• General Information: Parking distance sensor; rear; primer
• Manufacturer: BORSEHUNG

• Fitting Position: Front
• Number of pins: 3
• Chemical Properties: Paintable
• Manufacturer: FAE ELEKTRYKA

• Construction Year to: 01.2008
• Required quantity: 8
• Fitting Position: both sides, Front, Rear
• Number of pins: 3
• Chemical Properties: Paintable
• Mounting Type: Plugged
• Socket colour: black
• Shape: angled
• Supplementary Article/Supplementary Info: with fastening ring
• Assy./disassy. by qualified personnel required!:
• Name: Sensor, parkimisabi
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front, Rear
• Sensor Type: Ultrasonic Sensor
• Surface: primed
• Number of pins: 3
• Shape: angled
• Manufacturer: AIC

Installation Information: Attention, test the sensor for function before painting. General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 02.2008
• Required quantity: 4, 8
• Fitting Position: both sides, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 22
• Height [mm]: 26.3
• Number of pins: 3
• Diameter [mm]: 15.5
• Name: SENSOR, PARKIMISABI
• Manufacturer: VAL

• Construction Year to: 01.2008
• Required quantity: 4, 8
• Fitting Position: both sides, Front, Rear
• Sensor Type: Ultrasonic Sensor
• Chemical Properties: Paintable
• Length [mm]: 41
• Width [mm]: 22
• Height [mm]: 26.3
• Number of pins: 3
• Diameter [mm]: 15.5
• Name: SENSOR, PARKIMISABI
• Manufacturer: VAL

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: without Display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Park distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (park distance control): with parameter programming PPS
• Trailer Hitch: with automatic park distance control deactivation
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.156
• Name: PARKIMISABI
• Manufacturer: VAL
• Lisainfo: VAL632200
• Additional information: VAL632200

Park Distance Control Activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear General Information: Activation of the front sensors through the main brake

• Quality class: Q

Lisainfo: "Tootja: VALEO
(kvaliteediklass: Q)"

• Quality class: Q

Lisainfo: "Tootja: VALEO
(kvaliteediklass: Q)"

• Quality class: Q

Lisainfo: "Tootja: VALEO
(kvaliteediklass: Q)"

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: without Display
• Mounting Type: Plugged
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Park distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (park distance control): with parameter programming PPS
• Trailer Hitch: with automatic park distance control deactivation
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.2
• Name: ZESTAW PARKOWANIA PRZàD/TY 4 SZT. FLUSH MOUNT
• Manufacturer: VAL

Park Distance Control Activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear

• Supplementary Article/Info 2: with sensor
• Number of sensors: 4
• Fitting Position: Front, Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: with LCD colour display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Park distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (park distance control): with parameter programming PPS
• Trailer Hitch: with automatic park distance control deactivation
• Mounting Time from (in hours): 1.5
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 1.22
• Name: PARKIMISABI
• Manufacturer: VAL

Park Distance Control Activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear General Information: Activation of the front sensors through the main brake

• Supplementary Article/Info 2: with sensor
• Number of sensors: 8
• Fitting Position: Front and Rear
• Colour: black, Mat
• Sensor Type: Ultrasonic Sensor
• Vehicle Equipment: for vehicles with trailer hitch
• Gauge: with LCD colour display
• Mounting Type: mounting
• Rated Voltage [V]: 12
• Range from [m]: 0.1
• Range to [m]: 1.7
• for vehicle width to [m]: 2.2
• Height adjustment from [cm]: 40
• Height adjustment to [cm]: 65
• Park distance control sensor reflection angle: Sensor reflection angle: 0 to 5 degrees
• Parameter Programming, PPS (park distance control): with parameter programming PPS
• Trailer Hitch: without park distance control deactivation
• Mounting Time from (in hours): 3
• DIN/ISO: 17386
• Chemical Properties: Paintable
• Weight [kg]: 2.08
• Name: PARKIMISABI
• Manufacturer: VAL
• Lisainfo: VAL632202
• Additional information: VAL632202

Park Distance Control Activation: with acoustic warn function, with radio muting, Activation optional through switch, Activation through reverse gear General Information: Activation of the front sensors through the main brake

• for PR number: 7X8, 7X9
• Supplementary Article/Info 2: with cable
• Fitting Position: Vehicle Tailgate
• Manufacturer: METZGER