• Supplementary Article/Info 2: without sensor, without cable, with a plug
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Contact surface: Tin-plated
• Plug Type: Male
• Connector Shape: D Shape
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Number of pins: 2
• Supplementary Article/Info 2: without sensor, with plug, without cable
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle Left, Rear Axle Left
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• paired article number: hca-vw-029
• Fabrication Number: HCA-VW-028
• Manufacturer: NTY

• Fabrication Number: HCA-VW-036
• Manufacturer: NTY

Fitting Position: Front Axle Left, Rear Axle Left, Rear Axle Right, Front Axle Right

• Fitting Position: Front Axle Right, Rear Axle Right
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• paired article number: hca-vw-028
• Fabrication Number: HCA-VW-029
• Manufacturer: NTY

• Construction Year to: 05.2010
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• MAPP code available:
• Fitting Position: Rear Axle Left
• Manufacturer: KAMOKA

• Construction Year to: 05.2010
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• MAPP code available:
• Fitting Position: Rear Axle Right
• Manufacturer: KAMOKA

• Construction Year to: 05.2010
• Fitting Position: Rear Axle Left
• Number of pins: 2
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS067

• Construction Year to: 05.2010
• Fitting Position: Rear Axle Right
• Number of pins: 2
• Number of mounting bores: 1
• Manufacturer: MAGNETI MARELLI
• Name: MM MWSS068

• Fitting Position: Front Axle Left, Front Axle Right
• Construction Year from: 06.2010
• Sensor Type: Active sensor
• Length [mm]: 28
• Socket colour: black
• Manufacturer: JP GROUP

• Engine Code: CCMA, CASA
• Fitting Position: Front Axle Left, Rear Axle Left
• Block Separation:
• Sensor Type: Active sensor
• Number of pins: 2
• Manufacturer: JPN

• Fitting Position: Right Rear
• General Information: ABS speed sensor; rear right
• Manufacturer: VIKA

• Length [mm]: 57
• Fitting Position: Front Axle, Rear Axle
• Manufacturer: KAMOKA

• Fitting Position: Left Rear
• General Information: ABS speed sensor; rear left
• Manufacturer: VIKA

• Fitting Position: Front Axle Right, Rear Axle Right
• Number of pins: 2
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Required quantity: 2
• Fitting Position: Front Axle
• Construction Year from: 06.2010
• Supplementary Article/Info 2: without cable
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: without cable
• Manufacturer: DENCKERMANN HAMULCE

• Construction Year to: 05.2010
• Fitting Position: Front Axle Left
• Sensor Type: Hall Sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, front/rear, left
• Additional information: ABS sensor, front/rear, left

• Construction Year to: 05.2010
• Fitting Position: Front Axle Right
• Sensor Type: Active sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, front/rear, right
• Additional information: ABS sensor, front/rear, right

• Engine Code: CASA, CJGA, CCMA, CNRB
• Construction Year from: 06.2010
• Fitting Position: Front Axle both sides
• for PR number: 1VH, 1VJ
• Block Separation:
• Length [mm]: 57
• Number of connectors: 2
• Manufacturer: JPN

• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: without cable
• Manufacturer: DENCKERMANN FILTRY

• Fitting Position: Front Axle Left, Rear Axle Left
• Number of pins: 2
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Fitting Depth [mm]: 28
• for OE number: 95560640512
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0033

• Fitting Position: Front Axle, Rear Axle Left, Front Axle Left
• Sensor Type: Active sensor
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Front Axle, Rear Axle Right, Front Axle Right
• Sensor Type: Active sensor
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Construction Year to: 05.2010
• Fitting Position: Left, Rear Axle
• Required quantity: 1
• Total Length [mm]: 66
• Sensor Type: Active sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: CZUJNIK ABS VW T. TOUAREG 02- LE
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 05.2010
• Fitting Position: Right, Rear Axle
• Required quantity: 1
• Total Length [mm]: 66
• Sensor Type: Active sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: CZUJNIK ABS VW T. TOUAREG 02- PR
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Rear Axle Left, Front Axle Left, Rear Axle
• Construction Year to: 05.2010
• Supplementary Article/Info 2: without cable
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle, Rear Axle, Left, Right
• Manufacturer Restriction: VAG
• Cable Length [mm]: 500
• Number of pins: 2
• Cable Cross Section [mm²]: 0.5
• Socket Width [mm]: 1.5
• Contact surface: Tin-plated
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Plug housing design: Plug sleeve housing
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, piki-/klgkiirenduse andur
• Manufacturer: HBE

Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with heat shrink tubing

• Fitting Position: Front Axle Left, Rear Axle Left
• Number of pins: 2
• Sensor Type: Hall Sensor
• Assy./disassy. by qualified personnel required!:
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Engine Code: CASA, CJGA, CCMA, CNRB
• Construction Year from: 06.2010
• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• for PR number: 1VH, 1VJ
• Block Separation:
• Length [mm]: 57
• Number of pins: 2
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Number of pins: 2
• Socket Width [mm]: 1.5
• Plug Type: Female
• Number of circuits: 2
• Material: CuSn (copper-tin)
• Cable Length [mm]: 500
• Cable cross-section from [mm²]: 0.75
• Cable cross-section to [mm²]: 0.75
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with shrink squeeze connector
• Manufacturer: METZGER

Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right

• for OE number: 7L0 927 808 A
• Fitting Position: Front Axle Right, Rear Axle Right
• Manufacturer: TRUCKTEC

• Fitting Position: Left
• General Information: ABS speed sensor; left
• Manufacturer: VIKA

• Fitting Position: Front Axle Left
• Required quantity: 1
• Overall Length [mm]: 66
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: grey
• paired article number: 30146
• Weight [kg]: 0.09
• Manufacturer: A.B.S.

• Required quantity: 1
• Fitting Position: Rear Axle Left, Front Axle Left
• Supplementary Article/Info 2: without cable
• Colour: grey
• Manufacturer: BRM

Name: CZUJNIK ABS VW T. TOUAREG 02- /Q7 06- /CAYENNE 02- LE

• Required quantity: 1
• Fitting Position: Rear Axle Right, Front Axle Right
• Supplementary Article/Info 2: without cable
• Colour: grey
• Manufacturer: BRM

Name: CZUJNIK ABS VW T. TOUAREG 02- /Q7 06- /CAYENNE 02- PR

• Engine Code: CASA, CCMA, CJGA, CNRB
• Construction Year from: 06.2010
• Fitting Position: Front Axle
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV356

• Length [mm]: 66
• Sensor Type: Active sensor
• paired article number: FT80423
• Fitting Position: Rear Axle Right, Front Axle Right
• Manufacturer: FAST

• Length [mm]: 66
• Sensor Type: Active sensor
• paired article number: FT80424
• Fitting Position: Rear Axle Right, Front Axle Right
• Manufacturer: FAST

• Fitting Position: Front Axle Right
• Production date to: 31.05.2010
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Length [mm]: 66
• Braking/Driving Dynamics: for vehicles with ABS
• Connector Shape: D Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Right Rear
• General Information: Wheel speed sensor; rear right
• Manufacturer: BORSEHUNG

• Fitting Position: Front Axle Left, Front Axle Right
• Production date from: 31.05.2010
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Length [mm]: 58
• Braking/Driving Dynamics: for vehicles with ABS
• Connector Shape: D Shape
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Block Separation:
• Engine Code: CASA, CCMA
• Construction Year from: 06.2009
• Construction Year to: 05.2011
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.02
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV071

Fitting Position: Rear Axle Right, Front Axle Right, Front Axle, Rear Axle

• Fitting Position: Rear Axle Right, Front Axle Right
• Number of pins: 2
• Sensor Type: Active sensor
• Fitting Depth [mm]: 28
• Supplementary Article/Info 2: without cable
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0035

• Construction Year from: 06.2009
• Construction Year to: 05.2011
• Number of pins: 2
• Plug Type: Male
• Connector Shape: oval
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.02
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV072

Fitting Position: Front Axle Left, Rear Axle Left, Front Axle, Rear Axle

• Fitting Position: Front
• General Information: impluse sender
• Manufacturer: VIKA

• Fitting Position: Front
• Vehicle Identification Number (VIN) to: 4L-FD 000 001
• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Gold-plated
• Socket Width [mm]: 1.6
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• for OE number: 7L0 927 807 A
• Fitting Position: Front Axle Left, Rear Axle Left
• Manufacturer: TRUCKTEC

• Fitting Position: Front Axle Left
• Engine Code: CASA
• Construction Year to: 05.2010
• Sensor Type: Active sensor
• Number of pins: 2
• Supplementary Article/Info 2: without cable
• Connector Shape: D Shape
• Manufacturer: FAE

• Fitting Position: Front Axle Right
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Front Axle Left
• Sensor Type: Active sensor
• Number of occupied pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Engine Code: CCMA, CASA
• Fitting Position: Front Axle Right, Rear Axle Right
• Block Separation:
• paired article number: 32862
• Number of connectors: 2
• Weight [kg]: 0.01
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Right
• Length [mm]: 28
• Weight [kg]: 0.01
• Socket colour: black
• Colour: black
• Material: Plastic
• Sensor Type: Active sensor
• Number of pins: 2
• Manufacturer: METALCAUCHO

• Fitting Position: Axle beam
• General Information: Wheel speed sensor
• Manufacturer: BORSEHUNG

• Fitting Position: Left, Rear Axle, Front Axle
• Cable Length [mm]: 66
• Name: SN ASB157.01
• Manufacturer: NTN-SNR

• Fitting Position: Rear Axle Right, Front Axle Right
• Block Separation:
• Construction Year to: 05.2010
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• paired article number: 114 800 0021
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Rear Axle Left, Front Axle Left
• Block Separation:
• Construction Year to: 05.2010
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• paired article number: 114 800 0022
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Front Axle Right
• Required quantity: 1
• Overall Length [mm]: 66
• Length [mm]: 28
• Sensor Type: Active sensor
• Socket colour: grey
• paired article number: 30145
• Weight [kg]: 0.09
• Manufacturer: A.B.S.

• Engine Code: CCMA, CASA
• Fitting Position: Front Axle Right, Rear Axle Right
• Block Separation:
• paired article number: 30 93 2862
• Number of connectors: 2
• Weight [kg]: 0.01
• Name: SW 30 93 2861
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CASA
• Construction Year to: 05.2010
• Fitting Position: Front Axle Right, Rear Axle Right
• Required quantity: 1
• Block Separation:
• Sensor Length [mm]: 27.5
• Name: EP 1.960.173
• Manufacturer: EPS

• Engine Code: CASA
• Construction Year to: 05.2010
• Fitting Position: Front Axle Right, Rear Axle Right
• Required quantity: 1
• Block Separation:
• Sensor Length [mm]: 27.5
• Manufacturer: FACET

• Engine Code: CASA
• Construction Year to: 05.2010
• Fitting Position: Front Axle Left, Rear Axle Left
• Required quantity: 1
• Block Separation:
• Sensor Length [mm]: 27.5
• Manufacturer: FACET

• Construction Year from: 06.2010
• Fitting Position: 2nd front axle
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• for OE number: 7P0927807A
• Manufacturer: MEAT & DORIA

• Engine Code: CCMA, CASA
• Fitting Position: Front Axle Left, Rear Axle Left
• Block Separation:
• paired article number: 32861
• Number of connectors: 2
• Weight [kg]: 0.01
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: CASA, CJGA, CCMA, CNRB
• Construction Year from: 06.2010
• Fitting Position: Front Axle Left, Front Axle Right
• for PR number: 1VH, 1VJ
• Block Separation:
• Length [mm]: 57
• Number of connectors: 2
• Weight [kg]: 0.011
• Name: Andur, rattap””rete arv
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Construction Year from: 06.2010
• for PR number: 1VH, 1VJ
• Supplementary Article/Info 2: without cable
• Manufacturer: METZGER

• Fitting Position: Front Axle Left, Front Axle Right
• Sensor Type: Hall Sensor
• Number of connectors: 2
• Manufacturer: OPTIMAL ZAWIESZENIE

• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: without cable
• MAPP code available:
• Manufacturer: ATE

• Sensor Type: Hall Sensor
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Engine Code: CCMA, CJGA, CNRB
• Construction Year from: 06.2009, 05.2012
• Construction Year to: 05.2011
• Fitting Position: Front Axle
• Block Separation:
• Name: Andur, rattap””rete arv
• Manufacturer: BOS
• Lisainfo: 0986594620 BOSCH
• Additional information: 0986594620 BOSCH

• Fitting Position: Front Axle Left, Rear Axle Left
• Supplementary Article/Info 2: without cable
• Guarantee: 5 years guarantee
• Number of connectors: 2
• Rated Voltage [V]: 12
• Manufacturer: HUCO

• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: without cable
• MAPP code available:
• Manufacturer: ATE

• Engine Code: CASA, CCMA, CJGA, CNRB
• Construction Year to: 05.2010, 05.2011
• Fitting Position: Front Axle Left, Rear Axle Left
• Block Separation:
• Construction Year from: 05.2012
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Overall Length [mm]: 66
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH

• Engine Code: CASA
• Construction Year to: 05.2010
• Fitting Position: Front Axle Right
• Sensor Type: Active sensor
• Supplementary Article/Info 2: without cable
• Overall Length [mm]: 66
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: BOS

• Fitting Position: Front Axle Right, Rear Axle Right
• Supplementary Article/Info 2: without cable
• Guarantee: 5 years guarantee
• Number of connectors: 2
• Rated Voltage [V]: 12
• Manufacturer: HUCO

• Construction Year from: 06.2010
• Fitting Position: Front Axle
• Required quantity: 2
• Supplementary Article/Info 2: without cable
• MAPP code available:
• Manufacturer: ATE