Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Dust Cover: with dust lip
- Swirl Type: Alternating Twist
- Fitting Position: frontal sided
-
Material: FPM
(fluoride rubber) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- General Information: Oil seal for camshaft; 47*10*32
- Manufacturer: VIKA
-
Engine Code: CASA,
CCMA - Thickness [mm]: 10
- for OE number: 068 103 085 E
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 06.2009
- Engine Code: CASA
- Fitting Position: transmission sided
- Height [mm]: 10
- Outer Diameter [mm]: 47
- Inner Diameter [mm]: 32
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: BGA
- Fitting Position: Front
-
Fabrication Number: NUP-
VW- 027 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Inner Diameter [mm]: 55
- Outer Diameter [mm]: 70
- Height [mm]: 8
-
Swirl Type: Right-
hand Twist - Rotation Direction: Clockwise rotation
-
Material: AEM
(Ethylene Acrylate Rubber) - Fitting Position: frontal sided
-
Sealing lip material: PTFE
(polytetrafluoroethylene) - Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: transmission sided
-
Material: PTFE
(polytetrafluoroethylene) - Observe service information:
-
Swirl Type: Left-
hand Twist -
Fabrication Number: NUP-
VW- 018 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Engine Code: CCMA,
CASA - Width [mm]: 8.8
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
-
Material: PTFE
(polytetrafluoroethylene) - Supplementary Article/Info 2: with mounting sleeve
- Fitting Position: transmission sided
- Weight [kg]: 0.03
- Observe service information:
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: FEB
- Lisainfo: 104315 FEBI
- Additional information: 104315 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 8.8
- Fitting Position: transmission sided
- Dust Cover: with dust lip
-
Material: PTFE
(polytetrafluoroethylene) -
Swirl Type: Left-
hand Twist - Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: CASA,
CCMA - Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Width [mm]: 8.8
- Manufacturer: DR MOTOR
- Name: DRM 0651
- Fitting Position: frontal sided
- Width [mm]: 8
- Outer Diameter 1 [mm]: 70
- Inner Diameter 1 [mm]: 55
- Manufacturer: DR MOTOR PRZEWODY PRZELEWOWE
- Construction Year from: 06.2009
- Fitting Position: transmission sided
- Height [mm]: 8.8
- Outer Diameter [mm]: 105
- Inner Diameter [mm]: 85
- Manufacturer: BGA USZCZELKI
Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)
- Fitting Position: transmission sided
-
Engine Code: CJGA,
CNRB - Block Separation:
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 8
- Radial Shaft Seal Design: A SL
-
Swirl Type: Left-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
- Fitting Position: frontal sided
-
Engine Code: CCMA,
CASA - Block Separation:
-
Material: PTFE
(polytetrafluoroethylene) - Inner Diameter [mm]: 55
- Outer Diameter [mm]: 70
- Height [mm]: 8
- Radial Shaft Seal Design: A SL
-
Swirl Type: Right-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
- Fitting Position: frontal sided
- Inner Diameter [mm]: 55
- Outer Diameter [mm]: 70
- Height [mm]: 8
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Observe mounting information:
- Manufacturer: ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
-
Engine Code: CASA,
CCMA - Fitting Position: frontal sided
- Supplementary Article/Info 2: with mounting sleeve
- Height 1 [mm]: 8
- Outer Diameter 1 [mm]: 70
- Inner Diameter 1 [mm]: 55
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)
-
Engine Code: CJGA,
CNRB - Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 8
-
Swirl Type: Left-
hand Twist - Radial Shaft Seal Design: ASW OF
-
Name: Volli rongastihend,
Vntvoll - Manufacturer: DRM
-
Engine Code: CJGA,
CNRB - Fitting Position: transmission sided
- Height 1 [mm]: 8
- Outer Diameter 1 [mm]: 105
- Inner Diameter 1 [mm]: 85
-
Material: FPM
(fluoride rubber) - for OE number: 059103051K
-
Swirl Type: Left-
hand Twist - Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
- Construction Year from: 06.2009
- Engine Code: CASA
- Fitting Position: frontal sided
- Height [mm]: 8
- Outer Diameter [mm]: 70
- Inner Diameter [mm]: 55
- Manufacturer: BGA
Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)
- Fitting Position: transmission sided
-
Engine Code: CJGA,
CNRB - Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 8
- Radial Shaft Seal Design: ASW OF
-
Swirl Type: Left-
hand Twist -
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
- Fitting Position: transmission sided
-
Engine Code: CASA,
CCMA - Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 8.8
- Radial Shaft Seal Design: ASW
-
Swirl Type: Left-
hand Twist -
Material: PTFE
(polytetrafluoroethylene)/ FPM (fluoro rubber) - Dust Cover: with dust lip
- Observe mounting information:
- Manufacturer: ELRING
- Lisainfo: 026.790 ELR
- Additional information: 026.790 ELR
Installation Information: Mounting dry and without any additional oil and grease
- Fitting Position: transmission sided
-
Engine Code: CCMA,
CASA - Block Separation:
-
Material: PTFE
(polytetrafluoroethylene), ACM (Polyacrylate) - Supplementary Article/Info 2: with mounting sleeve
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 8.8
- Radial Shaft Seal Design: A SL
-
Swirl Type: Left-
hand Twist -
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
-
Engine Code: CASA,
CCMA - Fitting Position: transmission sided
- Outer Diameter 1 [mm]: 105
-
Material: PTFE
(polytetrafluoroethylene) - for OE number: 079103051F
- Height 1 [mm]: 8.8
- Dust Cover: with dust lip
-
Swirl Type: Left-
hand Twist - Supplementary Article/Info 2: with mounting sleeve
- Inner Diameter 1 [mm]: 85
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
- Fitting Position: transmission sided
- Block Separation:
-
Engine Code: CASA,
CCMA - Construction Year from: 06.2009
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Height [mm]: 8.8
- Manufacturer: AJUSA
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks