Articles

Filter results
Brand
Fitting Position

Product

Description

In stock

Price

(incl. VAT)

15195
Shaft Seal, manual transmission flange
FEBI BILSTEIN
  • Transmission Type: Differential Gear
  • Axle Gear ID: ETQ
  • Thickness [mm]: 8
  • Inner Diameter [mm]: 45
  • Outer Diameter [mm]: 60
  • Material: ACM (Polyacrylate)
  • Fitting Position: both sides
  • Weight [kg]: 0.002
  • Name: VOLLI RONGASTIHEND, MANUAALK.KASTI FLANTS
  • Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Orderable
8
2.86
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav 1p
41
2.89
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav
26
3.08
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Ord. 1 b-day
10
3.72
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Ord. 1 b-day
4
3.88
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Additional information OE codes Linked vehicles
44091595801
Shaft Seal, differential
vika
  • Fitting Position: Front Axle
  • Quantity: 2
  • General Information: radial shaft seal
  • Manufacturer: VIKA
Orderable
1
3.40
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
V10-3335
Shaft Seal, manual transmission, manual transmission flange
VAICO
  • Transmission Code: JAF
  • Block Separation:
  • Axle Version: ETQ
  • Shape: O Shape
  • Material: NBR (nitrile butadiene rubber)
  • Inner Diameter [mm]: 45
  • Thickness [mm]: 6
  • Sealing Ring Diameter [mm]: 60
  • Outer Diameter [mm]: 40
  • Weight [kg]: 0.022
  • Manufacturer: VAICO

Fitting Position: Outlet, Rear Axle, Rear Axle both sides, Front Axle both sides General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Orderable
1
3.79
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav
11
4.31
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Additional information OE codes Linked vehicles
NUP-AU-006
Shaft Seal, differential
NTY
  • Fitting Position: Front
  • Inner Diameter [mm]: 35
  • Outer Diameter [mm]: 47
  • Height [mm]: 8
  • Fabrication Number: NUP-AU-006
  • Manufacturer: NTY
  • Name: NTY NUP-AU-006
Ord. 2-3 b-days
5
4.32
0 laoseisuga toote tarneaega kindlasti enne tellimist täpsustada 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Tellitav 1 tp
1
4.40
Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00
Orderable
2
5.10
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
01035180B
Shaft Seal, differential
CORTECO
  • Fitting Position: Outlet, Drive Axle
  • Transmission Code: JAF
  • Version: DIFF. TORSEN
  • Height 1 [mm]: 7
  • Height 2 [mm]: 11
  • Outer Diameter 1 [mm]: 52
  • Inner Diameter 1 [mm]: 40
  • Material: ACM (Polyacrylate)
  • Swirl Type: Right-hand Twist
  • Dust Cover: with dust lip
  • Name: VOLLI RONGASTIHEND,DIFERENTSIAAL
  • Manufacturer: COT
Tellitav 1 tp
3
4.73
Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00
Ord. 1 b-day
2
4.97
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Ord. 1 b-day
6
6.36
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Additional information OE codes Linked vehicles
177131
Mounting, differential
FEBI BILSTEIN
  • Thickness [mm]: 60
  • Inner Diameter [mm]: 12
  • Outer Diameter [mm]: 58
  • Material: Rubber/Metal
  • Fitting Position: Rear Axle
  • Weight [kg]: 0.154
  • Name: Kinnitus, diferentsiaal
  • Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Orderable
12
8.10
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav
1
8.78
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Ord. 1 b-day
10
9.02
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Additional information OE codes Linked vehicles
33 10 3921
Mounting, differential
SWAG
  • Thickness [mm]: 60
  • Inner Diameter [mm]: 12
  • Outer Diameter [mm]: 58
  • Material: Rubber/Metal
  • Fitting Position: Rear Axle
  • Weight [kg]: 0.154
  • Name: SW 33 10 3921
  • Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Tellitav 1 tp
4
9.04
Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00
Additional information OE codes Linked vehicles
49496089
Shaft Seal, differential
CORTECO
  • Fitting Position: Front Axle, Outlet, Right
  • Transmission Code: HZR, JMQ, KHC
  • Height 1 [mm]: 8
  • Height 2 [mm]: 11.4
  • Outer Diameter 1 [mm]: 60.2
  • Inner Diameter 1 [mm]: 40
  • Material: ACM (Polyacrylate)
  • Name: CO 49496089
  • Manufacturer: CORTECO
Tellitav 1 tp
1
11.28
Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00
Additional information OE codes Linked vehicles
100277
Shaft Seal, differential
FEBI BILSTEIN
  • Thickness [mm]: 10
  • Inner Diameter [mm]: 43
  • Outer Diameter [mm]: 75
  • Material: FPM (fluoride rubber)
  • Fitting Position: Rear
  • Weight [kg]: 0.04
  • Name: VOLLI RONGASTIHEND,DIFERENTSIAAL
  • Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Orderable
6
11.50
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav 1p
1
11.67
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Ord. 1 b-day
3
12.43
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Ord. 2-3 b-days
7
13.17
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Additional information OE codes Linked vehicles
V10-3274
Shaft Seal, countershaft
VAICO
  • Outer Diameter [mm]: 47
  • Thickness [mm]: 10
  • Inner Diameter [mm]: 32
  • Fitting Position: transmission sided
  • Weight [kg]: 0.195
  • Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Orderable
2
22.48
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav
5
25.77
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Additional information OE codes Linked vehicles