• Installatsiooni pool: üleval, taga, esisild vasakul, esisild paremal
• Roolimisliik: õõtshoova jaoks
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Front Axle Left, Front Axle Right, outer, Lower
• Mounting Type: Rubber-Metal Mount
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, outer
• Additional information: Rubber mount for wishbone, front, outer

Lisainfo: Rubber mount for wishbone, front

• Quantity per packing unit: 5
• Control/Trailing Arm Type: Control Arm
• Axle alignment required after fitting:
• Fitting Position: inner, Upper, Front Axle
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.118
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Lower, Centre
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 43
• Height [mm]: 45
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Right, Left, Front Axle
• Required quantity: 4
• Name: COC 80004742
• Manufacturer: CORTECO

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
AUDI A4/6/8/ VW PASS
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Front Axle, inner, Upper, Lower, Front, Rear
• Inner Diameter 1 [mm]: 10
• Outer Diameter 1 [mm]: 47
• Thickness 1 [mm]: 40
• Manufacturer: DELPHI
• Name: DE TD437W

Lisainfo: Tie Bar Bush

Lisainfo: Tie Bar Bush

• Thickness [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46, 47
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.09
• Manufacturer: FEBI

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Lower, inner, Lower
• Manufacturer: GSP

• Fitting Position: Upper, Front Axle
• Manufacturer: GSP

• Fitting Position: Front Axle, Front, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 44
• for OE number: 4E0407181B
• paired article number: 2256054
• Manufacturer: SASIC

• Installatsiooni pool: all, ees, esisild vasakul, esisild paremal
• Roolimisliik: õõtshoova jaoks
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A6/A8/VW PHEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A6/A8/VW PHEATON
(kvaliteediklass: PJ)"

• Installatsiooni pool: esisild mõlemapoolselt, üleval
• Siseläbimõõt [mm]: 10,2
• Välisläbimõõt [mm]: 46
• Kõrgus (mm): 40
• Name: ALT 80928AL
• Manufacturer: ALTE AUTOMOTIVE

• Thickness [mm]: 40
• Mounting Type: Rubber-Metal Mount
• Outer Diameter 1 [mm]: 46
• Outer Diameter 2 [mm]: 47
• Inner Diameter 1 [mm]: 10
• Manufacturer: BGA

Fitting Position: Front Axle Left, Upper Front Axle, Front Axle Right

• Thickness [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46, 47
• Material: Rubber/Metal
• Fitting Position: Front Axle Left, Upper, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.09
• Name: SW 32 93 0696
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild, all, ees, väljas
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 40
• Kõrgus (mm): 50
• Name: ALT 80989AL
• Manufacturer: ALTE AUTOMOTIVE

• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Fitting Position: Front Axle, Upper, both sides, Front, Rear, inner
• Length [mm]: 40
• Inner Diameter [mm]: 10.1
• Outer Diameter [mm]: 46.4
• Quantity per axle: 4
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Inner Diameter 1 [mm]: 60
• Outer Diameter 1 [mm]: 12
• Thickness 1 [mm]: 46
• Manufacturer: DELPHI
• Name: DE TD1246W

Fitting Position: Rear Axle, in front of axle, both sides, outer, Lower

• Installatsiooni pool: all, ees, esisild vasakul, esisild paremal
• Roolimisliik: õõtshoova jaoks
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"

• Fitting Position: Lower, Front Axle, inner, Front, both sides
• Required quantity: 2
• Weight [kg]: 0.165
• Outer Diameter [mm]: 55.2
• Inner Diameter [mm]: 12
• Manufacturer: TEDGUM_TD

• Fitting Position: Front Axle Left, Front Axle Right, Lower, inner
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front, inner
• Additional information: Rubber mount for wishbone, front, inner

• Fitting Position: Rear Axle
• Total Length [mm]: 60
• Outer Diameter [mm]: 43.8
• Inner Diameter [mm]: 12.2
• Name: COC 80005087
• Manufacturer: CORTECO

• Installatsiooni pool: Tagasild
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,07
• Name: DY 37-22745
• Manufacturer: DYS

• Fitting Position: outer, Lower, Front Axle Left, Front Axle Right
• Outer Diameter 1 [mm]: 44
• Inner Diameter 1 [mm]: 12
• Thickness 1 [mm]: 45
• Manufacturer: BGA

• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.12
• Manufacturer: FEBI

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: outer, Rear Axle both sides, Lower
• Required quantity: 2
• Name: SK VKDS431017
• Manufacturer: SKF

• Fitting Position: Front Axle, Left, Right, Rear, Lower, inner
• Manufacturer: HUTCHINSON

• Fitting Position: Front Axle Left, Front Axle Right, Lower, outer
• Height [mm]: 60
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 55.3
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: inner, Lower Front Axle
• for OE number: 4E0407181D
• Manufacturer: GSP ZAWIESZENIE

• Fitting Position: Front Axle, inner, Front, Rear
• Weight [kg]: 0.115
• Required quantity: 4
• Control/Trailing Arm Type: Control Arm
• Mounting Type: Rubber-Metal Mount
• Packaging length [cm]: 11
• Packaging width [cm]: 6
• Packaging height [cm]: 6
• Manufacturer: MONROE

• Installatsiooni pool: Esisild, väljas
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,16
• Name: DY 37-06164-5
• Manufacturer: DYS

• Fitting Position: Front Axle both sides, Upper, inner
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Outer Diameter [mm]: 46.4
• Inner Diameter [mm]: 10
• Length [mm]: 40
• Weight [kg]: 0.088
• Manufacturer: RTS

• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 46
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.12
• Name: SW 30 93 0687
• Manufacturer: SWAG

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.24
• Required quantity: 2
• Fitting Position: Rear, outer, Rear Axle Lower, both sides
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 41.1
• Name: TG TED49719
• Manufacturer: TEDGUM

• Installatsiooni pool: Esisild, all, ees, sees
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 24
• Kõrgus (mm): 60
• Name: ALT 80990AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: outer, Lower, Front, Front Axle both sides
• Required quantity: 2
• paired article number: VKDS 331028
• Length [mm]: 45
• Height [mm]: 43.8
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 43.8
• Name: SK VKDS331028
• Manufacturer: SKF

• for PR number: 1BY
• Model Year from: 2007
• Fitting Position: in front of axle, outer, Lower Front Axle
• Weight [kg]: 0.112
• Packaging length [cm]: 4.9
• Packaging width [cm]: 4.4
• Packaging height [cm]: 4.4
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Rubber mount for wishbone, front
• Additional information: Rubber mount for wishbone, front

• Fitting Position: Front Axle, Upper
• Mounting Type: Rubber-Metal Mount
• Control/Trailing Arm Type: for control arm
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46
• Width [mm]: 40
• SVHC: No SVHC present!
• Manufacturer: FAG-ELEMENTY ZAWIESZENIA

• Installatsiooni pool: Tagasild mõlemapoolselt
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 44
• Kõrgus (mm): 60
• Name: ALT 98282AL
• Manufacturer: ALTE AUTOMOTIVE

• Vehicle Identification Number (VIN) to: 4B-3-030 000
• Fitting Position: Lower, inner, Front
• Material: Rubber/Metal
• Outer Diameter [mm]: 50
• Manufacturer: KAMOKA

• Installatsiooni pool: Tagasild, üleval, sees, väljas
• Siseläbimõõt [mm]: 12
• Välisläbimõõt [mm]: 36
• Kõrgus (mm): 46
• Name: ALT 88956AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle, inner, Lower, Front, Rear
• for OE number: 4F0407693H, 4F0407694H
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 65
• Thickness 1 [mm]: 80
• Name: DE TD1366W
• Manufacturer: DELPHI

• for PR number: 1BY
• Model Year from: 2007
• Fitting Position: Front, Rear Axle Lower, outer
• Weight [kg]: 0.246
• Packaging length [cm]: 6
• Packaging width [cm]: 5.3
• Packaging height [cm]: 5.3
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Control/Trailing Arm Type: for control arm
• Weight [g]: 111
• Name: IM 1638
• Manufacturer: ORIGINAL IMPERIUM

• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 65.2
• Material: Aluminium
• Fitting Position: Front Axle Left, Lower, Rear, Front Axle Right
• Weight [kg]: 0.45
• Observe service information:
• Manufacturer: FEBI

Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 37.8
• Width [mm]: 40
• Thickness [mm]: 38
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 40
• Material: Rubber/Metal
• Weight [kg]: 0.13
• Manufacturer: FEBI BILSTEIN

Fitting Position: Rear Axle Left, Lower, Rear, inner, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Tagasild
• Laagritüüp: Kummi-metalllaager
• Roolimisliik: õõtshoova jaoks
• Kaal (kg): 0,09
• Name: DY 37-24926
• Manufacturer: DYS

• Fitting Position: Rear Axle, Lower, Front, outer
• Inner Diameter [mm]: 12.2
• Outer Diameter 1 [mm]: 52
• Outer Diameter 2 [mm]: 44
• Width [mm]: 60
• SVHC: No SVHC present!
• Name: LU 829059810
• Manufacturer: FAG

• Fitting Position: Front Axle, Upper, both sides, Front, Rear
• Control/Trailing Arm Type: for control arm
• Quantity per axle: 4
• Manufacturer: LEMFORDER
• Name: LMI 2931801

SVHC: No information available, please contact the manufacturer!

• for PR number: 1BY
• Model Year from: 2007
• Fitting Position: inner, Rear Axle Lower, Centre
• Weight [kg]: 0.135
• Packaging length [cm]: 4.1
• Packaging width [cm]: 4.1
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Length [mm]: 37.8
• Width [mm]: 40
• Thickness [mm]: 38
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 40
• Material: Rubber/Metal
• Weight [kg]: 0.13
• Name: SW 30 10 4781
• Manufacturer: SWAG

Fitting Position: Rear Axle Left, Lower, Rear, inner, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 45
• Width [mm]: 42
• Thickness [mm]: 45
• Inner Diameter [mm]: 12.3
• Outer Diameter [mm]: 41.5
• Material: Rubber/Metal
• Weight [kg]: 0.25
• Manufacturer: FEBI

Fitting Position: Rear Axle Left, Lower, Rear, outer, Rear Axle Right General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild mõlemapoolselt, all, ees, väljas
• Siseläbimõõt [mm]: 13
• Välisläbimõõt [mm]: 44
• Kõrgus (mm): 45
• Name: ALT 84050AL
• Manufacturer: ALTE AUTOMOTIVE

• Fitting Position: Front Axle both sides, Lower, outer, Front
• Outer Diameter [mm]: 44
• Inner Diameter [mm]: 12.3
• Length [mm]: 45
• Weight [kg]: 0.104
• Manufacturer: RTS

• Fitting Position: Front Axle, both sides, Lower
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 65
• Manufacturer: DENCKERMANN ZAWIESZENIE

• for PR number: 1BY
• Model Year from: 2007
• Fitting Position: Rear Axle Upper, Rear, outer
• Weight [kg]: 0.132
• Packaging length [cm]: 4.6
• Packaging width [cm]: 3.7
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• Fitting Position: Front Axle, both sides, Upper, inner, Front, Rear
• Block Separation:
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 46.5
• Width 1 [mm]: 26
• Width 2 [mm]: 40
• SVHC: No SVHC present!
• Manufacturer: FAG

• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 44
• Material: Rubber/Metal
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.06
• Observe service information:
• Manufacturer: FEBI

Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: in front of axle, Front Axle, outer, Lower
• Inner Diameter [mm]: 12.1
• Outer Diameter [mm]: 43.8
• Length [mm]: 45
• paired article number: 270762
• Weight [kg]: 0.11
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"

• Fitting Position: behind the axle, Front Axle, inner, Lower
• Inner Diameter [mm]: 12.2
• Outer Diameter [mm]: 64.5
• Length [mm]: 80
• paired article number: 270760
• Weight [kg]: 0.29
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Front Axle, outer, in front of axle, Lower
• Inner Diameter 1 [mm]: 12
• Outer Diameter 1 [mm]: 44
• Thickness 1 [mm]: 45
• Manufacturer: DELPHI
• Name: DE TD723W

• for OE number: 4F0407693H, 4F0407694H
• Mounting Type: Rubber-Metal Mount
• Fitting Position: Front Axle, Lower, both sides, Rear, inner
• Length [mm]: 56
• Overall Length [mm]: 79.3
• Inner Diameter 1 [mm]: 12
• Inner Diameter 2 [mm]: 27
• Outer Diameter [mm]: 63.4
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Thickness [mm]: 45
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 44
• Material: Rubber/Metal
• Mounting Type: Rubber-Metal Mount
• Weight [kg]: 0.06
• Observe service information:
• Name: SW 30 92 7484
• Manufacturer: SWAG

Fitting Position: Front Axle Left, Lower, Front, outer, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thickness [mm]: 60
• Inner Diameter [mm]: 12
• Outer Diameter [mm]: 55, 28
• Material: Rubber/Metal
• Weight [kg]: 0.199
• Manufacturer: FEBI

Fitting Position: Front Axle Left, Lower, Front, inner, Front Axle Right Technical Information: Please tighten the mounting bolts with the wheels on the ground. General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for PR number: 1BY
• Model Year from: 2007
• Fitting Position: Rear Axle Lower, Upper, outer, Centre
• Weight [kg]: 0.236
• Packaging length [cm]: 4.5
• Packaging width [cm]: 4.2
• Packaging height [cm]: 4.2
• Manufacturer: FEBEST

• for OE number: 4F0407151A
• Fitting Position: in front of axle, inner, Lower Front Axle
• Weight [kg]: 0.183
• Packaging length [cm]: 5.5
• Packaging width [cm]: 5
• Packaging height [cm]: 5
• Manufacturer: FEBEST

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Name: Control arm bush left=right
• Quality class: PJ

Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
A.A6/A8/VW THEATON
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Right, Front Axle Left, Upper
• Height [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 47
• Supplementary Article/Supplementary Info: without holder
• reinforced version:
• Required quantity: 2
• Replace in pairs only:
• Manufacturer: MEYLE

General Information: 4-year warranty on all MEYLE-HD parts. Engineered and quality approved in Germany.

• Installatsiooni pool: Pealis
• Laagritüüp: Kummi-metalllaager
• Quality class: PJ
• Name: Control arm bush left=right

Lisainfo: "Tootja: TEKNOROT
A.A6/A8/VW PHEATON
(kvaliteediklass: PJ)" Additional information: "Tootja: TEKNOROT
A.A6/A8/VW PHEATON
(kvaliteediklass: PJ)"